bideford
bideford

with V-Anvil part no. 41250015

"External V-Anvil Micrometers
Design: Accuracy according to DIN 863, matt chromium-plated, spindle hardened and ground, measuring surfaces plane-parallel lapped, control of measuring forces by ratchet, with insulating surface to avoid conduction of hand temperature, clamping device and adjusting nut. The spindle pitch is adjusted to the respective V-block angle. Supplied in wooden case, incl. setting reference gauge.
Measuring range: 1-15 mm
Spindle Ø: 6.5 mm
Micrometer drum Ø: 17.0 mm
Reading: 0.01 mm
V-block angle: 60°"

£305.17


with V-Anvil part no. 41250020

"External V-Anvil Micrometers
Design: Accuracy according to DIN 863, matt chromium-plated, spindle hardened and ground, measuring surfaces plane-parallel lapped, control of measuring forces by ratchet, with insulating surface to avoid conduction of hand temperature, clamping device and adjusting nut. The spindle pitch is adjusted to the respective V-block angle. Supplied in wooden case, incl. setting reference gauge.
Measuring range: 5-20 mm
Spindle Ø: 6.5 mm
Micrometer drum Ø: 17.0 mm
Reading: 0.01 mm
V-block angle: 60°"

£320.46


with V-Anvil part no. 41250035

"External V-Anvil Micrometers
Design: Accuracy according to DIN 863, matt chromium-plated, spindle hardened and ground, measuring surfaces plane-parallel lapped, control of measuring forces by ratchet, with insulating surface to avoid conduction of hand temperature, clamping device and adjusting nut. The spindle pitch is adjusted to the respective V-block angle. Supplied in wooden case, incl. setting reference gauge.
Measuring range: 20-35 mm
Spindle Ø: 6.5 mm
Micrometer drum Ø: 17.0 mm
Reading: 0.01 mm
V-block angle: 60°"

£376.40


with V-Anvil part no. 41250050

"External V-Anvil Micrometers
Design: Accuracy according to DIN 863, matt chromium-plated, spindle hardened and ground, measuring surfaces plane-parallel lapped, control of measuring forces by ratchet, with insulating surface to avoid conduction of hand temperature, clamping device and adjusting nut. The spindle pitch is adjusted to the respective V-block angle. Supplied in wooden case, incl. setting reference gauge.
Measuring range: 35-50 mm
Spindle Ø: 6.5 mm
Micrometer drum Ø: 17.0 mm
Reading: 0.01 mm
V-block angle: 60°"

£457.80


with V-Anvil part no. 41251025

"External V-Anvil Micrometers
Design: Accuracy according to DIN 863, matt chromium-plated, spindle hardened and ground, measuring surfaces plane-parallel lapped, control of measuring forces by ratchet, with insulating surface to avoid conduction of hand temperature, clamping device and adjusting nut. The spindle pitch is adjusted to the respective V-block angle. Supplied in wooden case, incl. setting reference gauge.
Measuring range: 5-25 mm
Spindle Ø: 6.5 mm
Micrometer drum Ø: 17.0 mm
Reading: 0.01 mm
V-block angle: 108°"

£305.17


with V-Anvil part no. 41251045

"External V-Anvil Micrometers
Design: Accuracy according to DIN 863, matt chromium-plated, spindle hardened and ground, measuring surfaces plane-parallel lapped, control of measuring forces by ratchet, with insulating surface to avoid conduction of hand temperature, clamping device and adjusting nut. The spindle pitch is adjusted to the respective V-block angle. Supplied in wooden case, incl. setting reference gauge.
Measuring range: 25-45 mm
Spindle Ø: 6.5 mm
Micrometer drum Ø: 17.0 mm
Reading: 0.01 mm
V-block angle: 108°"

£401.83


with V-Anvil part no. 41251065

"External V-Anvil Micrometers
Design: Accuracy according to DIN 863, matt chromium-plated, spindle hardened and ground, measuring surfaces plane-parallel lapped, control of measuring forces by ratchet, with insulating surface to avoid conduction of hand temperature, clamping device and adjusting nut. The spindle pitch is adjusted to the respective V-block angle. Supplied in wooden case, incl. setting reference gauge.
Measuring range: 45-65 mm
Spindle Ø: 6.5 mm
Micrometer drum Ø: 17.0 mm
Reading: 0.01 mm
V-block angle: 108°"

£457.80

For non UK Orders, please email for carriage charges before ordering