bideford
bideford

Micro Drills part no. 10400010

"Micro Drills
Design: Special drill with reinforced shaft, high concentricity and precisely ground point.

Ø tolerance: 0/- 0.004 mm at spiral tip.
Other dimensions and left-hand cutting or solid carbide available on request.
Ø: 0.10 mm
Twist length: 0.5 mm
Total length: 25 mm
Ø h 8 shaft: 1.0 mm"

£7.16


Micro Drills part no. 10400015

"Micro Drills
Design: Special drill with reinforced shaft, high concentricity and precisely ground point.

Ø tolerance: 0/- 0.004 mm at spiral tip.
Other dimensions and left-hand cutting or solid carbide available on request.
Ø: 0.15 mm
Twist length: 0.8 mm
Total length: 25 mm
Ø h 8 shaft: 1.0 mm"

£7.01


Micro Drills part no. 10400020

"Micro Drills
Design: Special drill with reinforced shaft, high concentricity and precisely ground point.

Ø tolerance: 0/- 0.004 mm at spiral tip.
Other dimensions and left-hand cutting or solid carbide available on request.
Ø: 0.20 mm
Twist length: 1.5 mm
Total length: 25 mm
Ø h 8 shaft: 1.0 mm"

£5.50


Micro Drills part no. 10400025

"Micro Drills
Design: Special drill with reinforced shaft, high concentricity and precisely ground point.

Ø tolerance: 0/- 0.004 mm at spiral tip.
Other dimensions and left-hand cutting or solid carbide available on request.
Ø: 0.25 mm
Twist length: 1.9 mm
Total length: 25 mm
Ø h 8 shaft: 1.0 mm"

£4.90


Micro Drills part no. 10400030

"Micro Drills
Design: Special drill with reinforced shaft, high concentricity and precisely ground point.

Ø tolerance: 0/- 0.004 mm at spiral tip.
Other dimensions and left-hand cutting or solid carbide available on request.
Ø: 0.30 mm
Twist length: 1.9 mm
Total length: 25 mm
Ø h 8 shaft: 1.0 mm"

£4.66


Micro Drills part no. 10400035

"Micro Drills
Design: Special drill with reinforced shaft, high concentricity and precisely ground point.

Ø tolerance: 0/- 0.004 mm at spiral tip.
Other dimensions and left-hand cutting or solid carbide available on request.
Ø: 0.35 mm
Twist length: 2.4 mm
Total length: 25 mm
Ø h 8 shaft: 1.0 mm"

£4.20


Micro Drills part no. 10400040

"Micro Drills
Design: Special drill with reinforced shaft, high concentricity and precisely ground point.

Ø tolerance: 0/- 0.004 mm at spiral tip.
Other dimensions and left-hand cutting or solid carbide available on request.
Ø: 0.40 mm
Twist length: 3.0 mm
Total length: 25 mm
Ø h 8 shaft: 1.0 mm"

£3.52


Micro Drills part no. 10400045

"Micro Drills
Design: Special drill with reinforced shaft, high concentricity and precisely ground point.

Ø tolerance: 0/- 0.004 mm at spiral tip.
Other dimensions and left-hand cutting or solid carbide available on request.
Ø: 0.45 mm
Twist length: 3.0 mm
Total length: 25 mm
Ø h 8 shaft: 1.0 mm"

£3.90


Micro Drills part no. 10400050

"Micro Drills
Design: Special drill with reinforced shaft, high concentricity and precisely ground point.

Ø tolerance: 0/- 0.004 mm at spiral tip.
Other dimensions and left-hand cutting or solid carbide available on request.
Ø: 0.50 mm
Twist length: 3.4 mm
Total length: 25 mm
Ø h 8 shaft: 1.0 mm"

£3.42


Micro Drills part no. 10400055

"Micro Drills
Design: Special drill with reinforced shaft, high concentricity and precisely ground point.

Ø tolerance: 0/- 0.004 mm at spiral tip.
Other dimensions and left-hand cutting or solid carbide available on request.
Ø: 0.55 mm
Twist length: 3.9 mm
Total length: 25 mm
Ø h 8 shaft: 1.0 mm"

£3.61


Micro Drills part no. 10400060

"Micro Drills
Design: Special drill with reinforced shaft, high concentricity and precisely ground point.

Ø tolerance: 0/- 0.004 mm at spiral tip.
Other dimensions and left-hand cutting or solid carbide available on request.
Ø: 0.60 mm
Twist length: 3.9 mm
Total length: 25 mm
Ø h 8 shaft: 1.0 mm"

£3.28


Micro Drills part no. 10400070

"Micro Drills
Design: Special drill with reinforced shaft, high concentricity and precisely ground point.

Ø tolerance: 0/- 0.004 mm at spiral tip.
Other dimensions and left-hand cutting or solid carbide available on request.
Ø: 0.70 mm
Twist length: 4.8 mm
Total length: 25 mm
Ø h 8 shaft: 1.0 mm"

£3.15


Micro Drills part no. 10400075

"Micro Drills
Design: Special drill with reinforced shaft, high concentricity and precisely ground point.

Ø tolerance: 0/- 0.004 mm at spiral tip.
Other dimensions and left-hand cutting or solid carbide available on request.
Ø: 0.75 mm
Twist length: 4.8 mm
Total length: 25 mm
Ø h 8 shaft: 1.0 mm"

£3.52


Micro Drills part no. 10400080

"Micro Drills
Design: Special drill with reinforced shaft, high concentricity and precisely ground point.

Ø tolerance: 0/- 0.004 mm at spiral tip.
Other dimensions and left-hand cutting or solid carbide available on request.
Ø: 0.80 mm
Twist length: 5.3 mm
Total length: 25 mm
Ø h 8 shaft: 1.0 mm"

£3.35


Micro Drills part no. 10400085

"Micro Drills
Design: Special drill with reinforced shaft, high concentricity and precisely ground point.

Ø tolerance: 0/- 0.004 mm at spiral tip.
Other dimensions and left-hand cutting or solid carbide available on request.
Ø: 0.85 mm
Twist length: 5.3 mm
Total length: 25 mm
Ø h 8 shaft: 1.0 mm"

£3.61


Micro Drills part no. 10400090

"Micro Drills
Design: Special drill with reinforced shaft, high concentricity and precisely ground point.

Ø tolerance: 0/- 0.004 mm at spiral tip.
Other dimensions and left-hand cutting or solid carbide available on request.
Ø: 0.90 mm
Twist length: 6.0 mm
Total length: 25 mm
Ø h 8 shaft: 1.0 mm"

£3.35


Micro Drills part no. 10400095

"Micro Drills
Design: Special drill with reinforced shaft, high concentricity and precisely ground point.

Ø tolerance: 0/- 0.004 mm at spiral tip.
Other dimensions and left-hand cutting or solid carbide available on request.
Ø: 0.95 mm
Twist length: 6.0 mm
Total length: 25 mm
Ø h 8 shaft: 1.0 mm"

£3.72


Micro Drills part no. 10400100

"Micro Drills
Design: Special drill with reinforced shaft, high concentricity and precisely ground point.

Ø tolerance: 0/- 0.004 mm at spiral tip.
Other dimensions and left-hand cutting or solid carbide available on request.
Ø: 1.00 mm
Twist length: 6.8 mm
Total length: 25 mm
Ø h 8 shaft: 1.0 mm"

£3.35


Micro Drills part no. 10400105

"Micro Drills
Design: Special drill with reinforced shaft, high concentricity and precisely ground point.

Ø tolerance: 0/- 0.004 mm at spiral tip.
Other dimensions and left-hand cutting or solid carbide available on request.
Ø: 1.05 mm
Twist length: 6.8 mm
Total length: 25 mm
Ø h 8 shaft: 1.0 mm"

£3.74


Micro Drills part no. 10400110

"Micro Drills
Design: Special drill with reinforced shaft, high concentricity and precisely ground point.

Ø tolerance: 0/- 0.004 mm at spiral tip.
Other dimensions and left-hand cutting or solid carbide available on request.
Ø: 1.10 mm
Twist length: 7.6 mm
Total length: 25 mm
Ø h 8 shaft: 1.0 mm"

£3.85


Micro Drills part no. 10400115

"Micro Drills
Design: Special drill with reinforced shaft, high concentricity and precisely ground point.

Ø tolerance: 0/- 0.004 mm at spiral tip.
Other dimensions and left-hand cutting or solid carbide available on request.
Ø: 1.15 mm
Twist length: 7.6 mm
Total length: 25 mm
Ø h 8 shaft: 1.0 mm"

£4.01


Micro Drills part no. 10400120

"Micro Drills
Design: Special drill with reinforced shaft, high concentricity and precisely ground point.

Ø tolerance: 0/- 0.004 mm at spiral tip.
Other dimensions and left-hand cutting or solid carbide available on request.
Ø: 1.20 mm
Twist length: 8.5 mm
Total length: 25 mm
Ø h 8 shaft: 1.0 mm"

£3.52


Micro Drills part no. 10400125

"Micro Drills
Design: Special drill with reinforced shaft, high concentricity and precisely ground point.

Ø tolerance: 0/- 0.004 mm at spiral tip.
Other dimensions and left-hand cutting or solid carbide available on request.
Ø: 1.25 mm
Twist length: 8.5 mm
Total length: 25 mm
Ø h 8 shaft: 1.0 mm"

£4.05


Micro Drills part no. 10400130

"Micro Drills
Design: Special drill with reinforced shaft, high concentricity and precisely ground point.

Ø tolerance: 0/- 0.004 mm at spiral tip.
Other dimensions and left-hand cutting or solid carbide available on request.
Ø: 1.30 mm
Twist length: 8.5 mm
Total length: 25 mm
Ø h 8 shaft: 1.0 mm"

£3.52


Micro Drills part no. 10400135

"Micro Drills
Design: Special drill with reinforced shaft, high concentricity and precisely ground point.

Ø tolerance: 0/- 0.004 mm at spiral tip.
Other dimensions and left-hand cutting or solid carbide available on request.
Ø: 1.35 mm
Twist length: 9.5 mm
Total length: 25 mm
Ø h 8 shaft: 1.0 mm"

£3.77


Micro Drills part no. 10400140

"Micro Drills
Design: Special drill with reinforced shaft, high concentricity and precisely ground point.

Ø tolerance: 0/- 0.004 mm at spiral tip.
Other dimensions and left-hand cutting or solid carbide available on request.
Ø: 1.40 mm
Twist length: 9.5 mm
Total length: 25 mm
Ø h 8 shaft: 1.0 mm"

£3.61


Micro Drills part no. 10400145

"Micro Drills
Design: Special drill with reinforced shaft, high concentricity and precisely ground point.

Ø tolerance: 0/- 0.004 mm at spiral tip.
Other dimensions and left-hand cutting or solid carbide available on request.
Ø: 1.45 mm
Twist length: 9.5 mm
Total length: 25 mm
Ø h 8 shaft: 1.0 mm"

£3.90

For non UK Orders, please email for carriage charges before ordering