bideford
bideford

Die Stocks / 1866 part no. 18660001

"Die Stocks without Tightening Screw
Design: Housing made of fine zinc diecast ZL 0410, steel handle zinc coated, detachable. Without tightening screws: The cutting die is locked above the flute with an adjustable clamp, as with tap wrenches. The special design of the jaw and the small tolerances ensure that the dies are seated firmly in the die stock.

Application: For clamping and solid cutting of cutting dies of EN 22 568 and EN 24 231/DIN 40434.
** with 4 tightening screws and fixed handles.
For cutting dies Ø x height: 16 x 5** mm
Size mm: M 1-2,6
Metric-fine: M 2-2,5
Whitworth pipes: -
Withworth: 1/16""-3/32""
UNC: No. 1-3
UNF: No. 0-3
Length: 160 mm"

£3.42


Die Stocks / 1866 part no. 18660003

"Die Stocks without Tightening Screw
Design: Housing made of fine zinc diecast ZL 0410, steel handle zinc coated, detachable. Without tightening screws: The cutting die is locked above the flute with an adjustable clamp, as with tap wrenches. The special design of the jaw and the small tolerances ensure that the dies are seated firmly in the die stock.

Application: For clamping and solid cutting of cutting dies of EN 22 568 and EN 24 231/DIN 40434.
For cutting dies Ø x height: 20 x 5 mm
Size mm: M 3-4
Metric-fine: M 3-4
Whitworth pipes: -
Withworth: 1/8""-5/32""
UNC: No. 4-5
UNF: No. 4-5
Length: 180 mm"

£3.70


Die Stocks / 1866 part no. 18660005

"Die Stocks without Tightening Screw
Design: Housing made of fine zinc diecast ZL 0410, steel handle zinc coated, detachable. Without tightening screws: The cutting die is locked above the flute with an adjustable clamp, as with tap wrenches. The special design of the jaw and the small tolerances ensure that the dies are seated firmly in the die stock.

Application: For clamping and solid cutting of cutting dies of EN 22 568 and EN 24 231/DIN 40434.
* 0.75 lead
For cutting dies Ø x height: 20 x 7 mm
Size mm: M 4,5-6
Metric-fine: M 5*-6*
Whitworth pipes: -
Withworth: 3/16""-1/4""
UNC: No. 6 -1/4""
UNF: No. 8 -1/4""
Length: 180 mm"

£3.70


Die Stocks / 1866 part no. 18660007

"Die Stocks without Tightening Screw
Design: Housing made of fine zinc diecast ZL 0410, steel handle zinc coated, detachable. Without tightening screws: The cutting die is locked above the flute with an adjustable clamp, as with tap wrenches. The special design of the jaw and the small tolerances ensure that the dies are seated firmly in the die stock.

Application: For clamping and solid cutting of cutting dies of EN 22 568 and EN 24 231/DIN 40434.
For cutting dies Ø x height: 25 x 9 mm
Size mm: M 7-9
Metric-fine: M 7-9
Whitworth pipes: -
Withworth: 5/16""
UNC: 5/16""
UNF: 5/16""
Length: 210 mm"

£3.94


Die Stocks / 1866 part no. 18660009

"Die Stocks without Tightening Screw
Design: Housing made of fine zinc diecast ZL 0410, steel handle zinc coated, detachable. Without tightening screws: The cutting die is locked above the flute with an adjustable clamp, as with tap wrenches. The special design of the jaw and the small tolerances ensure that the dies are seated firmly in the die stock.

Application: For clamping and solid cutting of cutting dies of EN 22 568 and EN 24 231/DIN 40434.
For cutting dies Ø x height: 30 x 11 mm
Size mm: M 10-11
Metric-fine: M 10-11
Whitworth pipes: G 1/8""
Withworth: 3/8""-7/16""
UNC: 3/8""-7/16""
UNF: 3/8""-7/16""
Length: 270 mm"

£5.76


Die Stocks / 1866 part no. 18660011

"Die Stocks without Tightening Screw
Design: Housing made of fine zinc diecast ZL 0410, steel handle zinc coated, detachable. Without tightening screws: The cutting die is locked above the flute with an adjustable clamp, as with tap wrenches. The special design of the jaw and the small tolerances ensure that the dies are seated firmly in the die stock.

Application: For clamping and solid cutting of cutting dies of EN 22 568 and EN 24 231/DIN 40434.
For cutting dies Ø x height: 38 x 10 mm
Size mm: -
Metric-fine: M 12-15
Whitworth pipes: G 1/4""
Withworth: -
UNC: -
UNF: 1/2""-9/16""
Length: 310 mm"

£7.79


Die Stocks / 1866 part no. 18660013

"Die Stocks without Tightening Screw
Design: Housing made of fine zinc diecast ZL 0410, steel handle zinc coated, detachable. Without tightening screws: The cutting die is locked above the flute with an adjustable clamp, as with tap wrenches. The special design of the jaw and the small tolerances ensure that the dies are seated firmly in the die stock.

Application: For clamping and solid cutting of cutting dies of EN 22 568 and EN 24 231/DIN 40434.
For cutting dies Ø x height: 38 x 14 mm
Size mm: M 12-14
Metric-fine: -
Whitworth pipes: -
Withworth: 1/2""-9/16""
UNC: 1/2""-9/16""
UNF: -
Length: 310 mm"

£7.79


Die Stocks / 1866 part no. 18660015

"Die Stocks without Tightening Screw
Design: Housing made of fine zinc diecast ZL 0410, steel handle zinc coated, detachable. Without tightening screws: The cutting die is locked above the flute with an adjustable clamp, as with tap wrenches. The special design of the jaw and the small tolerances ensure that the dies are seated firmly in the die stock.

Application: For clamping and solid cutting of cutting dies of EN 22 568 and EN 24 231/DIN 40434.
For cutting dies Ø x height: 45 x 14 mm
Size mm: -
Metric-fine: M 16-20
Whitworth pipes: G 3/8""-1/2""
Withworth: -
UNC: -
UNF: 5/8""-3/4""
Length: 440 mm"

£12.04


Die Stocks / 1866 part no. 18660017

"Die Stocks without Tightening Screw
Design: Housing made of fine zinc diecast ZL 0410, steel handle zinc coated, detachable. Without tightening screws: The cutting die is locked above the flute with an adjustable clamp, as with tap wrenches. The special design of the jaw and the small tolerances ensure that the dies are seated firmly in the die stock.

Application: For clamping and solid cutting of cutting dies of EN 22 568 and EN 24 231/DIN 40434.
For cutting dies Ø x height: 45 x 18 mm
Size mm: M 16-20
Metric-fine: -
Whitworth pipes: -
Withworth: 5/8""-3/4""
UNC: 5/8""-3/4""
UNF: -
Length: 440 mm"

£12.04


Die Stocks / 1866 part no. 18660019

"Die Stocks without Tightening Screw
Design: Housing made of fine zinc diecast ZL 0410, steel handle zinc coated, detachable. Without tightening screws: The cutting die is locked above the flute with an adjustable clamp, as with tap wrenches. The special design of the jaw and the small tolerances ensure that the dies are seated firmly in the die stock.

Application: For clamping and solid cutting of cutting dies of EN 22 568 and EN 24 231/DIN 40434.
For cutting dies Ø x height: 55 x 16 mm
Size mm: -
Metric-fine: M 22-25
Whitworth pipes: G 5/8""-3/4""
Withworth: -
UNC: -
UNF: 7/8""-1""
Length: 490 mm"

£13.09


Die Stocks / 1866 part no. 18660021

"Die Stocks without Tightening Screw
Design: Housing made of fine zinc diecast ZL 0410, steel handle zinc coated, detachable. Without tightening screws: The cutting die is locked above the flute with an adjustable clamp, as with tap wrenches. The special design of the jaw and the small tolerances ensure that the dies are seated firmly in the die stock.

Application: For clamping and solid cutting of cutting dies of EN 22 568 and EN 24 231/DIN 40434.
For cutting dies Ø x height: 55 x 22 mm
Size mm: M 22-24
Metric-fine: -
Whitworth pipes: -
Withworth: 7/8""-1""
UNC: 7/8""-1""
UNF: -
Length: 490 mm"

£13.09


Die Stocks / 1866 part no. 18660023

"Die Stocks without Tightening Screw
Design: Housing made of fine zinc diecast ZL 0410, steel handle zinc coated, detachable. Without tightening screws: The cutting die is locked above the flute with an adjustable clamp, as with tap wrenches. The special design of the jaw and the small tolerances ensure that the dies are seated firmly in the die stock.

Application: For clamping and solid cutting of cutting dies of EN 22 568 and EN 24 231/DIN 40434.
For cutting dies Ø x height: 65 x 18 mm
Size mm: -
Metric-fine: M 26-36
Whitworth pipes: G 7/8""-1""
Withworth: -
UNC: -
UNF: 1 1/8""-1 3/8""
Length: 630 mm"

£27.58


Die Stocks / 1866 part no. 18660025

"Die Stocks without Tightening Screw
Design: Housing made of fine zinc diecast ZL 0410, steel handle zinc coated, detachable. Without tightening screws: The cutting die is locked above the flute with an adjustable clamp, as with tap wrenches. The special design of the jaw and the small tolerances ensure that the dies are seated firmly in the die stock.

Application: For clamping and solid cutting of cutting dies of EN 22 568 and EN 24 231/DIN 40434.
For cutting dies Ø x height: 65 x 25 mm
Size mm: M 27-36
Metric-fine: -
Whitworth pipes: -
Withworth: 1 1/8""-1 3/8""
UNC: 1 1/8""-1 3/8""
UNF: -
Length: 630 mm"

£27.58

For non UK Orders, please email for carriage charges before ordering