bideford
bideford

DIGI-MET® part no. 40610500

"Digital Workshop Vernier Calliper Gauge DIGI-MET®, without probe tips
Design: Accuracy according to DIN 862, stainless steel, fully hardened, measuring surfaces ultra-fine ground, suitable for internal and external measurements, zero point setting in any position, HOLD function, LCD display, mm/inch selection, data output Opto RS 232 C, max. traversing speed 1.5 m/s, with locking screw and fine adjustment, battery-operated (3v lithium battery), incl. calibration certificate. Supplied in wooden case, incl. battery.

Note:
Spare battery 40272032
Data cable 40250232
Measuring range: 500 mm
Jaw length: 125 mm
Min. hole: 20 mm
Reading: 0.01/0.0005 mm/inch"

£1,427.92


DIGI-MET® part no. 40610800

"Digital Workshop Vernier Calliper Gauge DIGI-MET®, without probe tips
Design: Accuracy according to DIN 862, stainless steel, fully hardened, measuring surfaces ultra-fine ground, suitable for internal and external measurements, zero point setting in any position, HOLD function, LCD display, mm/inch selection, data output Opto RS 232 C, max. traversing speed 1.5 m/s, with locking screw and fine adjustment, battery-operated (3v lithium battery), incl. calibration certificate. Supplied in wooden case, incl. battery.

Note:
Spare battery 40272032
Data cable 40250232
Measuring range: 800 mm
Jaw length: 150 mm
Min. hole: 20 mm
Reading: 0.01/0.0005 mm/inch"

£2,339.16


DIGI-MET® part no. 40611000

"Digital Workshop Vernier Calliper Gauge DIGI-MET®, without probe tips
Design: Accuracy according to DIN 862, stainless steel, fully hardened, measuring surfaces ultra-fine ground, suitable for internal and external measurements, zero point setting in any position, HOLD function, LCD display, mm/inch selection, data output Opto RS 232 C, max. traversing speed 1.5 m/s, with locking screw and fine adjustment, battery-operated (3v lithium battery), incl. calibration certificate. Supplied in wooden case, incl. battery.

Note:
Spare battery 40272032
Data cable 40250232
Measuring range: 1000 mm
Jaw length: 150 mm
Min. hole: 20 mm
Reading: 0.01/0.0005 mm/inch"

£2,692.14


DIGI-MET® part no. 40620800

"Digital Workshop Vernier Calliper Gauges DIGI-MET®, with probe tips
Design: Accuracy according to DIN 862, stainless steel, fully hardened, measuring surfaces ultra-fine ground, suitable for internal and external measurements, zero point setting in any position, HOLD function, LCD display, mm/inch selection, data output Opto RS 232 C, max. traversing speed 1.5 m/s, with locking screw and fine adjustment, battery-operated (3v lithium battery), incl. calibration certificate. Supplied in wooden case, incl. battery.

Note:
Spare battery 40272032
Data cable 40250232
Measuring range: 800 mm
Jaw length: 150 mm
Min. hole: 20 mm
Reading: 0.01/0.0005 mm/inch"

£2,525.29


DIGI-MET® part no. 40621000

"Digital Workshop Vernier Calliper Gauges DIGI-MET®, with probe tips
Design: Accuracy according to DIN 862, stainless steel, fully hardened, measuring surfaces ultra-fine ground, suitable for internal and external measurements, zero point setting in any position, HOLD function, LCD display, mm/inch selection, data output Opto RS 232 C, max. traversing speed 1.5 m/s, with locking screw and fine adjustment, battery-operated (3v lithium battery), incl. calibration certificate. Supplied in wooden case, incl. battery.

Note:
Spare battery 40272032
Data cable 40250232
Measuring range: 1000 mm
Jaw length: 150 mm
Min. hole: 20 mm
Reading: 0.01/0.0005 mm/inch"

£2,907.05


DIGI-MET® part no. 41111025

"External Micrometers DIGI-MET®
Design: On/off switch, automatic off switch, zero point setting in any position, mm/inch selection, splash proof IP 54, clamping lever, control of measuring force by ratchet, with insulating surface to avoid conduction of hand temperature, as from 25 mm with setting reference gauge. Supplied in wooden case.
Measuring range: 0-25 mm
Reading: 0.001/0.0005 mm/inch"

£223.46


DIGI-MET® part no. 41111050

"External Micrometers DIGI-MET®
Design: On/off switch, automatic off switch, zero point setting in any position, mm/inch selection, splash proof IP 54, clamping lever, control of measuring force by ratchet, with insulating surface to avoid conduction of hand temperature, as from 25 mm with setting reference gauge. Supplied in wooden case.
Measuring range: 25-50 mm
Reading: 0.001/0.0005 mm/inch"

£256.68


DIGI-MET® part no. 41111075

"External Micrometers DIGI-MET®
Design: On/off switch, automatic off switch, zero point setting in any position, mm/inch selection, splash proof IP 54, clamping lever, control of measuring force by ratchet, with insulating surface to avoid conduction of hand temperature, as from 25 mm with setting reference gauge. Supplied in wooden case.
Measuring range: 50-75 mm
Reading: 0.001/0.0005 mm/inch"

£292.33


DIGI-MET® part no. 41111100

"External Micrometers DIGI-MET®
Design: On/off switch, automatic off switch, zero point setting in any position, mm/inch selection, splash proof IP 54, clamping lever, control of measuring force by ratchet, with insulating surface to avoid conduction of hand temperature, as from 25 mm with setting reference gauge. Supplied in wooden case.
Measuring range: 75-100 mm
Reading: 0.001/0.0005 mm/inch"

£337.53

For non UK Orders, please email for carriage charges before ordering