bideford
bideford

Bits part no. 64510035

"Bits for Recess TORX® Screws 1/4"" DIN 3126 C 6.3, with Holding Function
Description of Design:

Extra-hard - for gentle screwing in wood to prevent breakage.

Tough-hard - for hard screwing in metal and sheet metal to prevent breakage.

Torsion - load peaks in the torsion zone of the bit are cushioned for longer life of the bits.

BiTorsion® - the torsion zone of the BiTorsion® bit has a higher hardness of 20 % compared with the shank. It serves to cushion torque peaks.

Diamond-coated - for universal use, long life. Very small diamond particles adhere to the screw and ensure secure seating of the tool in the screw head.
Design: Torsion-shaped and holding function. The special geometry of the tip ensures reliable holding of the screw.

Application: Bits with holding function are the ideal tool when positioning TORX® screws in confined spaces, e.g. assembly of indexable inserts.

Description of Design:
Extra-hard - for gentle screwing in wood to prevent breakage.
Tough-hard - for hard screwing in metal and sheet metal to prevent breakage.
Torsion - load peaks in the torsion zone of the bit are cushioned for longer life of the bits.
BiTorsion® - the torsion zone of the BiTorsion® bit has a hardness reduced by 20 % compared with the shank. It serves to cushion torque peaks. Longer life of the bits.
Diamond-coated - for universal use, long life. Very small diamond particles adhere to the screw and ensure secure seating of the tool in the screw head.

General Note: TORX PLUS® tools are superior to TORX® tools in torque transmission, due to the significantly larger contact face in the screw.
Attention: The TORX® system and the TORX PLUS® system are compatible only to a limited extent: The operation (restricted) of a TORX PLUS® tool with the conventional TORX® tool is possible. The use of TORX PLUS® with the conventional TORX® profile is however not possible.
Size: T 40
Length: 50 mm
PU piece: 10"

£2.17


Bits part no. 64520008

"Bits for TORX® socket screws 1/4"" DIN 3126 E6.3
Description of Design:

Extra-hard - for gentle screwing in wood to prevent breakage.

Tough-hard - for hard screwing in metal and sheet metal to prevent breakage.

Torsion - load peaks in the torsion zone of the bit are cushioned for longer life of the bits.

BiTorsion® - the torsion zone of the BiTorsion® bit has a higher hardness of 20 % compared with the shank. It serves to cushion torque peaks.

Diamond-coated - for universal use, long life. Very small diamond particles adhere to the screw and ensure secure seating of the tool in the screw head.
Design: Tip toughened.
Dimensions: T 8
Length: 50 mm
PU piece: 10"

£1.72


Bits part no. 64520010

"Bits for TORX® socket screws 1/4"" DIN 3126 E6.3
Description of Design:

Extra-hard - for gentle screwing in wood to prevent breakage.

Tough-hard - for hard screwing in metal and sheet metal to prevent breakage.

Torsion - load peaks in the torsion zone of the bit are cushioned for longer life of the bits.

BiTorsion® - the torsion zone of the BiTorsion® bit has a higher hardness of 20 % compared with the shank. It serves to cushion torque peaks.

Diamond-coated - for universal use, long life. Very small diamond particles adhere to the screw and ensure secure seating of the tool in the screw head.
Design: Tip toughened.
Dimensions: T 10
Length: 50 mm
PU piece: 10"

£1.72


Bits part no. 64520015

"Bits for TORX® socket screws 1/4"" DIN 3126 E6.3
Description of Design:

Extra-hard - for gentle screwing in wood to prevent breakage.

Tough-hard - for hard screwing in metal and sheet metal to prevent breakage.

Torsion - load peaks in the torsion zone of the bit are cushioned for longer life of the bits.

BiTorsion® - the torsion zone of the BiTorsion® bit has a higher hardness of 20 % compared with the shank. It serves to cushion torque peaks.

Diamond-coated - for universal use, long life. Very small diamond particles adhere to the screw and ensure secure seating of the tool in the screw head.
Design: Tip toughened.
Dimensions: T 15
Length: 50 mm
PU piece: 10"

£1.72


Bits part no. 64520020

"Bits for TORX® socket screws 1/4"" DIN 3126 E6.3
Description of Design:

Extra-hard - for gentle screwing in wood to prevent breakage.

Tough-hard - for hard screwing in metal and sheet metal to prevent breakage.

Torsion - load peaks in the torsion zone of the bit are cushioned for longer life of the bits.

BiTorsion® - the torsion zone of the BiTorsion® bit has a higher hardness of 20 % compared with the shank. It serves to cushion torque peaks.

Diamond-coated - for universal use, long life. Very small diamond particles adhere to the screw and ensure secure seating of the tool in the screw head.
Design: Tip toughened.
Dimensions: T 20
Length: 50 mm
PU piece: 10"

£1.72


Bits part no. 64520025

"Bits for TORX® socket screws 1/4"" DIN 3126 E6.3
Description of Design:

Extra-hard - for gentle screwing in wood to prevent breakage.

Tough-hard - for hard screwing in metal and sheet metal to prevent breakage.

Torsion - load peaks in the torsion zone of the bit are cushioned for longer life of the bits.

BiTorsion® - the torsion zone of the BiTorsion® bit has a higher hardness of 20 % compared with the shank. It serves to cushion torque peaks.

Diamond-coated - for universal use, long life. Very small diamond particles adhere to the screw and ensure secure seating of the tool in the screw head.
Design: Tip toughened.
Dimensions: T 25
Length: 50 mm
PU piece: 10"

£1.72


Bits part no. 64520027

"Bits for TORX® socket screws 1/4"" DIN 3126 E6.3
Description of Design:

Extra-hard - for gentle screwing in wood to prevent breakage.

Tough-hard - for hard screwing in metal and sheet metal to prevent breakage.

Torsion - load peaks in the torsion zone of the bit are cushioned for longer life of the bits.

BiTorsion® - the torsion zone of the BiTorsion® bit has a higher hardness of 20 % compared with the shank. It serves to cushion torque peaks.

Diamond-coated - for universal use, long life. Very small diamond particles adhere to the screw and ensure secure seating of the tool in the screw head.
Design: Tip toughened.
Dimensions: T 27
Length: 50 mm
PU piece: 10"

£1.72


Bits part no. 64520030

"Bits for TORX® socket screws 1/4"" DIN 3126 E6.3
Description of Design:

Extra-hard - for gentle screwing in wood to prevent breakage.

Tough-hard - for hard screwing in metal and sheet metal to prevent breakage.

Torsion - load peaks in the torsion zone of the bit are cushioned for longer life of the bits.

BiTorsion® - the torsion zone of the BiTorsion® bit has a higher hardness of 20 % compared with the shank. It serves to cushion torque peaks.

Diamond-coated - for universal use, long life. Very small diamond particles adhere to the screw and ensure secure seating of the tool in the screw head.
Design: Tip toughened.
Dimensions: T 30
Length: 50 mm
PU piece: 10"

£1.72


Bits part no. 64520040

"Bits for TORX® socket screws 1/4"" DIN 3126 E6.3
Description of Design:

Extra-hard - for gentle screwing in wood to prevent breakage.

Tough-hard - for hard screwing in metal and sheet metal to prevent breakage.

Torsion - load peaks in the torsion zone of the bit are cushioned for longer life of the bits.

BiTorsion® - the torsion zone of the BiTorsion® bit has a higher hardness of 20 % compared with the shank. It serves to cushion torque peaks.

Diamond-coated - for universal use, long life. Very small diamond particles adhere to the screw and ensure secure seating of the tool in the screw head.
Design: Tip toughened.
Dimensions: T 40
Length: 50 mm
PU piece: 10"

£1.72


Bits part no. 64540010

"Bits for TORX® socket screws with DIN 3126 E6.3, long version
Description of Design:

Extra-hard - for gentle screwing in wood to prevent breakage.

Tough-hard - for hard screwing in metal and sheet metal to prevent breakage.

Torsion - load peaks in the torsion zone of the bit are cushioned for longer life of the bits.

BiTorsion® - the torsion zone of the BiTorsion® bit has a higher hardness of 20 % compared with the shank. It serves to cushion torque peaks.

Diamond-coated - for universal use, long life. Very small diamond particles adhere to the screw and ensure secure seating of the tool in the screw head.
Design: Tip toughend.
Dimensions: T 10
Length: 70 mm
PU piece: 10"

£3.31


Bits part no. 64540015

"Bits for TORX® socket screws with DIN 3126 E6.3, long version
Description of Design:

Extra-hard - for gentle screwing in wood to prevent breakage.

Tough-hard - for hard screwing in metal and sheet metal to prevent breakage.

Torsion - load peaks in the torsion zone of the bit are cushioned for longer life of the bits.

BiTorsion® - the torsion zone of the BiTorsion® bit has a higher hardness of 20 % compared with the shank. It serves to cushion torque peaks.

Diamond-coated - for universal use, long life. Very small diamond particles adhere to the screw and ensure secure seating of the tool in the screw head.
Design: Tip toughend.
Dimensions: T 15
Length: 70 mm
PU piece: 10"

£3.31


Bits part no. 64540020

"Bits for TORX® socket screws with DIN 3126 E6.3, long version
Description of Design:

Extra-hard - for gentle screwing in wood to prevent breakage.

Tough-hard - for hard screwing in metal and sheet metal to prevent breakage.

Torsion - load peaks in the torsion zone of the bit are cushioned for longer life of the bits.

BiTorsion® - the torsion zone of the BiTorsion® bit has a higher hardness of 20 % compared with the shank. It serves to cushion torque peaks.

Diamond-coated - for universal use, long life. Very small diamond particles adhere to the screw and ensure secure seating of the tool in the screw head.
Design: Tip toughend.
Dimensions: T 20
Length: 70 mm
PU piece: 10"

£3.31


Bits part no. 64540025

"Bits for TORX® socket screws with DIN 3126 E6.3, long version
Description of Design:

Extra-hard - for gentle screwing in wood to prevent breakage.

Tough-hard - for hard screwing in metal and sheet metal to prevent breakage.

Torsion - load peaks in the torsion zone of the bit are cushioned for longer life of the bits.

BiTorsion® - the torsion zone of the BiTorsion® bit has a higher hardness of 20 % compared with the shank. It serves to cushion torque peaks.

Diamond-coated - for universal use, long life. Very small diamond particles adhere to the screw and ensure secure seating of the tool in the screw head.
Design: Tip toughend.
Dimensions: T 25
Length: 70 mm
PU piece: 10"

£3.31


Bits part no. 64540027

"Bits for TORX® socket screws with DIN 3126 E6.3, long version
Description of Design:

Extra-hard - for gentle screwing in wood to prevent breakage.

Tough-hard - for hard screwing in metal and sheet metal to prevent breakage.

Torsion - load peaks in the torsion zone of the bit are cushioned for longer life of the bits.

BiTorsion® - the torsion zone of the BiTorsion® bit has a higher hardness of 20 % compared with the shank. It serves to cushion torque peaks.

Diamond-coated - for universal use, long life. Very small diamond particles adhere to the screw and ensure secure seating of the tool in the screw head.
Design: Tip toughend.
Dimensions: T 27
Length: 70 mm
PU piece: 10"

£3.31


Bits part no. 64540030

"Bits for TORX® socket screws with DIN 3126 E6.3, long version
Description of Design:

Extra-hard - for gentle screwing in wood to prevent breakage.

Tough-hard - for hard screwing in metal and sheet metal to prevent breakage.

Torsion - load peaks in the torsion zone of the bit are cushioned for longer life of the bits.

BiTorsion® - the torsion zone of the BiTorsion® bit has a higher hardness of 20 % compared with the shank. It serves to cushion torque peaks.

Diamond-coated - for universal use, long life. Very small diamond particles adhere to the screw and ensure secure seating of the tool in the screw head.
Design: Tip toughend.
Dimensions: T 30
Length: 70 mm
PU piece: 10"

£3.31


Bits part no. 64540040

"Bits for TORX® socket screws with DIN 3126 E6.3, long version
Description of Design:

Extra-hard - for gentle screwing in wood to prevent breakage.

Tough-hard - for hard screwing in metal and sheet metal to prevent breakage.

Torsion - load peaks in the torsion zone of the bit are cushioned for longer life of the bits.

BiTorsion® - the torsion zone of the BiTorsion® bit has a higher hardness of 20 % compared with the shank. It serves to cushion torque peaks.

Diamond-coated - for universal use, long life. Very small diamond particles adhere to the screw and ensure secure seating of the tool in the screw head.
Design: Tip toughend.
Dimensions: T 40
Length: 70 mm
PU piece: 10"

£3.31


Bits part no. 64550010

"Bits for TORX® Socket Screws ¼ DIN 3126 E6.3, extra long version
Description of Design:

Extra-hard - for gentle screwing in wood to prevent breakage.

Tough-hard - for hard screwing in metal and sheet metal to prevent breakage.

Torsion - load peaks in the torsion zone of the bit are cushioned for longer life of the bits.

BiTorsion® - the torsion zone of the BiTorsion® bit has a higher hardness of 20 % compared with the shank. It serves to cushion torque peaks.

Diamond-coated - for universal use, long life. Very small diamond particles adhere to the screw and ensure secure seating of the tool in the screw head.
Design: Tip toughened.
Size: T 10
Length: 89 mm
PU piece: 10"

£4.47


Bits part no. 64550015

"Bits for TORX® Socket Screws ¼ DIN 3126 E6.3, extra long version
Description of Design:

Extra-hard - for gentle screwing in wood to prevent breakage.

Tough-hard - for hard screwing in metal and sheet metal to prevent breakage.

Torsion - load peaks in the torsion zone of the bit are cushioned for longer life of the bits.

BiTorsion® - the torsion zone of the BiTorsion® bit has a higher hardness of 20 % compared with the shank. It serves to cushion torque peaks.

Diamond-coated - for universal use, long life. Very small diamond particles adhere to the screw and ensure secure seating of the tool in the screw head.
Design: Tip toughened.
Size: T 15
Length: 89 mm
PU piece: 10"

£4.47


Bits part no. 64550020

"Bits for TORX® Socket Screws ¼ DIN 3126 E6.3, extra long version
Description of Design:

Extra-hard - for gentle screwing in wood to prevent breakage.

Tough-hard - for hard screwing in metal and sheet metal to prevent breakage.

Torsion - load peaks in the torsion zone of the bit are cushioned for longer life of the bits.

BiTorsion® - the torsion zone of the BiTorsion® bit has a higher hardness of 20 % compared with the shank. It serves to cushion torque peaks.

Diamond-coated - for universal use, long life. Very small diamond particles adhere to the screw and ensure secure seating of the tool in the screw head.
Design: Tip toughened.
Size: T 20
Length: 89 mm
PU piece: 10"

£4.47


Bits part no. 64550025

"Bits for TORX® Socket Screws ¼ DIN 3126 E6.3, extra long version
Description of Design:

Extra-hard - for gentle screwing in wood to prevent breakage.

Tough-hard - for hard screwing in metal and sheet metal to prevent breakage.

Torsion - load peaks in the torsion zone of the bit are cushioned for longer life of the bits.

BiTorsion® - the torsion zone of the BiTorsion® bit has a higher hardness of 20 % compared with the shank. It serves to cushion torque peaks.

Diamond-coated - for universal use, long life. Very small diamond particles adhere to the screw and ensure secure seating of the tool in the screw head.
Design: Tip toughened.
Size: T 25
Length: 89 mm
PU piece: 10"

£4.47


Bits part no. 64550030

"Bits for TORX® Socket Screws ¼ DIN 3126 E6.3, extra long version
Description of Design:

Extra-hard - for gentle screwing in wood to prevent breakage.

Tough-hard - for hard screwing in metal and sheet metal to prevent breakage.

Torsion - load peaks in the torsion zone of the bit are cushioned for longer life of the bits.

BiTorsion® - the torsion zone of the BiTorsion® bit has a higher hardness of 20 % compared with the shank. It serves to cushion torque peaks.

Diamond-coated - for universal use, long life. Very small diamond particles adhere to the screw and ensure secure seating of the tool in the screw head.
Design: Tip toughened.
Size: T 30
Length: 89 mm
PU piece: 10"

£4.47


Bits part no. 64550040

"Bits for TORX® Socket Screws ¼ DIN 3126 E6.3, extra long version
Description of Design:

Extra-hard - for gentle screwing in wood to prevent breakage.

Tough-hard - for hard screwing in metal and sheet metal to prevent breakage.

Torsion - load peaks in the torsion zone of the bit are cushioned for longer life of the bits.

BiTorsion® - the torsion zone of the BiTorsion® bit has a higher hardness of 20 % compared with the shank. It serves to cushion torque peaks.

Diamond-coated - for universal use, long life. Very small diamond particles adhere to the screw and ensure secure seating of the tool in the screw head.
Design: Tip toughened.
Size: T 40
Length: 89 mm
PU piece: 10"

£4.47


Bits part no. 64560005

"Bits for Cross Recess Screws Phillips 1/4"" DIN 3126 C6.3, BiTorsion®
Description of Design:

Extra-hard - for gentle screwing in wood to prevent breakage.

Tough-hard - for hard screwing in metal and sheet metal to prevent breakage.

Torsion - load peaks in the torsion zone of the bit are cushioned for longer life of the bits.

BiTorsion® - the torsion zone of the BiTorsion® bit has a higher hardness of 20 % compared with the shank. It serves to cushion torque peaks.

Diamond-coated - for universal use, long life. Very small diamond particles adhere to the screw and ensure secure seating of the tool in the screw head.
Design: Diamond-coated tip.
Dimensions: PH 1
Length: 50 mm
PU piece: 10"

£3.16


Bits part no. 64560010

"Bits for Cross Recess Screws Phillips 1/4"" DIN 3126 C6.3, BiTorsion®
Description of Design:

Extra-hard - for gentle screwing in wood to prevent breakage.

Tough-hard - for hard screwing in metal and sheet metal to prevent breakage.

Torsion - load peaks in the torsion zone of the bit are cushioned for longer life of the bits.

BiTorsion® - the torsion zone of the BiTorsion® bit has a higher hardness of 20 % compared with the shank. It serves to cushion torque peaks.

Diamond-coated - for universal use, long life. Very small diamond particles adhere to the screw and ensure secure seating of the tool in the screw head.
Design: Diamond-coated tip.
Dimensions: PH 2
Length: 50 mm
PU piece: 10"

£3.16


Bits part no. 64560015

"Bits for Cross Recess Screws Phillips 1/4"" DIN 3126 C6.3, BiTorsion®
Description of Design:

Extra-hard - for gentle screwing in wood to prevent breakage.

Tough-hard - for hard screwing in metal and sheet metal to prevent breakage.

Torsion - load peaks in the torsion zone of the bit are cushioned for longer life of the bits.

BiTorsion® - the torsion zone of the BiTorsion® bit has a higher hardness of 20 % compared with the shank. It serves to cushion torque peaks.

Diamond-coated - for universal use, long life. Very small diamond particles adhere to the screw and ensure secure seating of the tool in the screw head.
Design: Diamond-coated tip.
Dimensions: PH 3
Length: 50 mm
PU piece: 10"

£3.16


Bits part no. 64570000

"Hexagon Socket Screws
Description of Design:

Extra-hard - for gentle screwing in wood to prevent breakage.

Tough-hard - for hard screwing in metal and sheet metal to prevent breakage.

Torsion - load peaks in the torsion zone of the bit are cushioned for longer life of the bits.

BiTorsion® - the torsion zone of the BiTorsion® bit has a higher hardness of 20 % compared with the shank. It serves to cushion torque peaks.

Diamond-coated - for universal use, long life. Very small diamond particles adhere to the screw and ensure secure seating of the tool in the screw head.
Design: Made of stainless steel. Thanks to the vacuum ice-hardening the tip features the same hardness as conventional tools and is therefore workshop-compatible and wear-resistant.

Application: Bits from stainless steel are used where extraneous rust at stainless steel is to be avoided. Especially for screwing stainless steel screws in window and door construction, in case of fittings and sinks, facades, handrails, balconies, fences etc.

Note: Extraneous rust in stainless steel processing is caused by tools made of normal steel. Abraded particles are thereby produced which adhere to the stainless steel. These particles become rust under the effect of oxygen. Use stainless steel tools only for stainless steel screws and store them separately! Extraneous rust is thereby avoided.
Stainless Rapidaptor® see (part no. 6428 0010).

Description of Design:
Extra-hard - for gentle screwing in wood to prevent breakage.
Tough-hard - for hard screwing in metal and sheet metal to prevent breakage.
Torsion - load peaks in the torsion zone of the bit are cushioned for longer life of the bits.
BiTorsion® - the torsion zone of the BiTorsion® bit has a hardness reduced by 20 % compared with the shank. It serves to cushion torque peaks. Longer life of the bits.
Diamond-coated - for universal use, long life. Very small diamond particles adhere to the screw and ensure secure seating of the tool in the screw head.
Key width: 1.5 mm
Length: 25 mm
PU piece: 10"

£2.58


Bits part no. 64570005

"Hexagon Socket Screws
Description of Design:

Extra-hard - for gentle screwing in wood to prevent breakage.

Tough-hard - for hard screwing in metal and sheet metal to prevent breakage.

Torsion - load peaks in the torsion zone of the bit are cushioned for longer life of the bits.

BiTorsion® - the torsion zone of the BiTorsion® bit has a higher hardness of 20 % compared with the shank. It serves to cushion torque peaks.

Diamond-coated - for universal use, long life. Very small diamond particles adhere to the screw and ensure secure seating of the tool in the screw head.
Design: Made of stainless steel. Thanks to the vacuum ice-hardening the tip features the same hardness as conventional tools and is therefore workshop-compatible and wear-resistant.

Application: Bits from stainless steel are used where extraneous rust at stainless steel is to be avoided. Especially for screwing stainless steel screws in window and door construction, in case of fittings and sinks, facades, handrails, balconies, fences etc.

Note: Extraneous rust in stainless steel processing is caused by tools made of normal steel. Abraded particles are thereby produced which adhere to the stainless steel. These particles become rust under the effect of oxygen. Use stainless steel tools only for stainless steel screws and store them separately! Extraneous rust is thereby avoided.
Stainless Rapidaptor® see (part no. 6428 0010).

Description of Design:
Extra-hard - for gentle screwing in wood to prevent breakage.
Tough-hard - for hard screwing in metal and sheet metal to prevent breakage.
Torsion - load peaks in the torsion zone of the bit are cushioned for longer life of the bits.
BiTorsion® - the torsion zone of the BiTorsion® bit has a hardness reduced by 20 % compared with the shank. It serves to cushion torque peaks. Longer life of the bits.
Diamond-coated - for universal use, long life. Very small diamond particles adhere to the screw and ensure secure seating of the tool in the screw head.
Key width: 2 mm
Length: 25 mm
PU piece: 10"

£2.58


Bits part no. 64570010

"Hexagon Socket Screws
Description of Design:

Extra-hard - for gentle screwing in wood to prevent breakage.

Tough-hard - for hard screwing in metal and sheet metal to prevent breakage.

Torsion - load peaks in the torsion zone of the bit are cushioned for longer life of the bits.

BiTorsion® - the torsion zone of the BiTorsion® bit has a higher hardness of 20 % compared with the shank. It serves to cushion torque peaks.

Diamond-coated - for universal use, long life. Very small diamond particles adhere to the screw and ensure secure seating of the tool in the screw head.
Design: Made of stainless steel. Thanks to the vacuum ice-hardening the tip features the same hardness as conventional tools and is therefore workshop-compatible and wear-resistant.

Application: Bits from stainless steel are used where extraneous rust at stainless steel is to be avoided. Especially for screwing stainless steel screws in window and door construction, in case of fittings and sinks, facades, handrails, balconies, fences etc.

Note: Extraneous rust in stainless steel processing is caused by tools made of normal steel. Abraded particles are thereby produced which adhere to the stainless steel. These particles become rust under the effect of oxygen. Use stainless steel tools only for stainless steel screws and store them separately! Extraneous rust is thereby avoided.
Stainless Rapidaptor® see (part no. 6428 0010).

Description of Design:
Extra-hard - for gentle screwing in wood to prevent breakage.
Tough-hard - for hard screwing in metal and sheet metal to prevent breakage.
Torsion - load peaks in the torsion zone of the bit are cushioned for longer life of the bits.
BiTorsion® - the torsion zone of the BiTorsion® bit has a hardness reduced by 20 % compared with the shank. It serves to cushion torque peaks. Longer life of the bits.
Diamond-coated - for universal use, long life. Very small diamond particles adhere to the screw and ensure secure seating of the tool in the screw head.
Key width: 2.5 mm
Length: 25 mm
PU piece: 10"

£2.58


Bits part no. 64570015

"Hexagon Socket Screws
Description of Design:

Extra-hard - for gentle screwing in wood to prevent breakage.

Tough-hard - for hard screwing in metal and sheet metal to prevent breakage.

Torsion - load peaks in the torsion zone of the bit are cushioned for longer life of the bits.

BiTorsion® - the torsion zone of the BiTorsion® bit has a higher hardness of 20 % compared with the shank. It serves to cushion torque peaks.

Diamond-coated - for universal use, long life. Very small diamond particles adhere to the screw and ensure secure seating of the tool in the screw head.
Design: Made of stainless steel. Thanks to the vacuum ice-hardening the tip features the same hardness as conventional tools and is therefore workshop-compatible and wear-resistant.

Application: Bits from stainless steel are used where extraneous rust at stainless steel is to be avoided. Especially for screwing stainless steel screws in window and door construction, in case of fittings and sinks, facades, handrails, balconies, fences etc.

Note: Extraneous rust in stainless steel processing is caused by tools made of normal steel. Abraded particles are thereby produced which adhere to the stainless steel. These particles become rust under the effect of oxygen. Use stainless steel tools only for stainless steel screws and store them separately! Extraneous rust is thereby avoided.
Stainless Rapidaptor® see (part no. 6428 0010).

Description of Design:
Extra-hard - for gentle screwing in wood to prevent breakage.
Tough-hard - for hard screwing in metal and sheet metal to prevent breakage.
Torsion - load peaks in the torsion zone of the bit are cushioned for longer life of the bits.
BiTorsion® - the torsion zone of the BiTorsion® bit has a hardness reduced by 20 % compared with the shank. It serves to cushion torque peaks. Longer life of the bits.
Diamond-coated - for universal use, long life. Very small diamond particles adhere to the screw and ensure secure seating of the tool in the screw head.
Key width: 3 mm
Length: 25 mm
PU piece: 10"

£2.58


Bits part no. 64570020

"Hexagon Socket Screws
Description of Design:

Extra-hard - for gentle screwing in wood to prevent breakage.

Tough-hard - for hard screwing in metal and sheet metal to prevent breakage.

Torsion - load peaks in the torsion zone of the bit are cushioned for longer life of the bits.

BiTorsion® - the torsion zone of the BiTorsion® bit has a higher hardness of 20 % compared with the shank. It serves to cushion torque peaks.

Diamond-coated - for universal use, long life. Very small diamond particles adhere to the screw and ensure secure seating of the tool in the screw head.
Design: Made of stainless steel. Thanks to the vacuum ice-hardening the tip features the same hardness as conventional tools and is therefore workshop-compatible and wear-resistant.

Application: Bits from stainless steel are used where extraneous rust at stainless steel is to be avoided. Especially for screwing stainless steel screws in window and door construction, in case of fittings and sinks, facades, handrails, balconies, fences etc.

Note: Extraneous rust in stainless steel processing is caused by tools made of normal steel. Abraded particles are thereby produced which adhere to the stainless steel. These particles become rust under the effect of oxygen. Use stainless steel tools only for stainless steel screws and store them separately! Extraneous rust is thereby avoided.
Stainless Rapidaptor® see (part no. 6428 0010).

Description of Design:
Extra-hard - for gentle screwing in wood to prevent breakage.
Tough-hard - for hard screwing in metal and sheet metal to prevent breakage.
Torsion - load peaks in the torsion zone of the bit are cushioned for longer life of the bits.
BiTorsion® - the torsion zone of the BiTorsion® bit has a hardness reduced by 20 % compared with the shank. It serves to cushion torque peaks. Longer life of the bits.
Diamond-coated - for universal use, long life. Very small diamond particles adhere to the screw and ensure secure seating of the tool in the screw head.
Key width: 4 mm
Length: 25 mm
PU piece: 10"

£2.58


Bits part no. 64570025

"Hexagon Socket Screws
Description of Design:

Extra-hard - for gentle screwing in wood to prevent breakage.

Tough-hard - for hard screwing in metal and sheet metal to prevent breakage.

Torsion - load peaks in the torsion zone of the bit are cushioned for longer life of the bits.

BiTorsion® - the torsion zone of the BiTorsion® bit has a higher hardness of 20 % compared with the shank. It serves to cushion torque peaks.

Diamond-coated - for universal use, long life. Very small diamond particles adhere to the screw and ensure secure seating of the tool in the screw head.
Design: Made of stainless steel. Thanks to the vacuum ice-hardening the tip features the same hardness as conventional tools and is therefore workshop-compatible and wear-resistant.

Application: Bits from stainless steel are used where extraneous rust at stainless steel is to be avoided. Especially for screwing stainless steel screws in window and door construction, in case of fittings and sinks, facades, handrails, balconies, fences etc.

Note: Extraneous rust in stainless steel processing is caused by tools made of normal steel. Abraded particles are thereby produced which adhere to the stainless steel. These particles become rust under the effect of oxygen. Use stainless steel tools only for stainless steel screws and store them separately! Extraneous rust is thereby avoided.
Stainless Rapidaptor® see (part no. 6428 0010).

Description of Design:
Extra-hard - for gentle screwing in wood to prevent breakage.
Tough-hard - for hard screwing in metal and sheet metal to prevent breakage.
Torsion - load peaks in the torsion zone of the bit are cushioned for longer life of the bits.
BiTorsion® - the torsion zone of the BiTorsion® bit has a hardness reduced by 20 % compared with the shank. It serves to cushion torque peaks. Longer life of the bits.
Diamond-coated - for universal use, long life. Very small diamond particles adhere to the screw and ensure secure seating of the tool in the screw head.
Key width: 5 mm
Length: 25 mm
PU piece: 10"

£2.58


Bits part no. 64570030

"Hexagon Socket Screws
Description of Design:

Extra-hard - for gentle screwing in wood to prevent breakage.

Tough-hard - for hard screwing in metal and sheet metal to prevent breakage.

Torsion - load peaks in the torsion zone of the bit are cushioned for longer life of the bits.

BiTorsion® - the torsion zone of the BiTorsion® bit has a higher hardness of 20 % compared with the shank. It serves to cushion torque peaks.

Diamond-coated - for universal use, long life. Very small diamond particles adhere to the screw and ensure secure seating of the tool in the screw head.
Design: Made of stainless steel. Thanks to the vacuum ice-hardening the tip features the same hardness as conventional tools and is therefore workshop-compatible and wear-resistant.

Application: Bits from stainless steel are used where extraneous rust at stainless steel is to be avoided. Especially for screwing stainless steel screws in window and door construction, in case of fittings and sinks, facades, handrails, balconies, fences etc.

Note: Extraneous rust in stainless steel processing is caused by tools made of normal steel. Abraded particles are thereby produced which adhere to the stainless steel. These particles become rust under the effect of oxygen. Use stainless steel tools only for stainless steel screws and store them separately! Extraneous rust is thereby avoided.
Stainless Rapidaptor® see (part no. 6428 0010).

Description of Design:
Extra-hard - for gentle screwing in wood to prevent breakage.
Tough-hard - for hard screwing in metal and sheet metal to prevent breakage.
Torsion - load peaks in the torsion zone of the bit are cushioned for longer life of the bits.
BiTorsion® - the torsion zone of the BiTorsion® bit has a hardness reduced by 20 % compared with the shank. It serves to cushion torque peaks. Longer life of the bits.
Diamond-coated - for universal use, long life. Very small diamond particles adhere to the screw and ensure secure seating of the tool in the screw head.
Key width: 6 mm
Length: 25 mm
PU piece: 10"

£2.58


Bits part no. 64580005

"Bits for Cross Head Screws Pozidriv 1/4"" DIN 3126 E6.3, BiTorsion®
Description of Design:

Extra-hard - for gentle screwing in wood to prevent breakage.

Tough-hard - for hard screwing in metal and sheet metal to prevent breakage.

Torsion - load peaks in the torsion zone of the bit are cushioned for longer life of the bits.

BiTorsion® - the torsion zone of the BiTorsion® bit has a higher hardness of 20 % compared with the shank. It serves to cushion torque peaks.

Diamond-coated - for universal use, long life. Very small diamond particles adhere to the screw and ensure secure seating of the tool in the screw head.
Design: Tip diamond-coated.
Dimensions: PZ 1
Length: 50 mm
PU piece: 10"

£3.16


Bits part no. 64580010

"Bits for Cross Head Screws Pozidriv 1/4"" DIN 3126 E6.3, BiTorsion®
Description of Design:

Extra-hard - for gentle screwing in wood to prevent breakage.

Tough-hard - for hard screwing in metal and sheet metal to prevent breakage.

Torsion - load peaks in the torsion zone of the bit are cushioned for longer life of the bits.

BiTorsion® - the torsion zone of the BiTorsion® bit has a higher hardness of 20 % compared with the shank. It serves to cushion torque peaks.

Diamond-coated - for universal use, long life. Very small diamond particles adhere to the screw and ensure secure seating of the tool in the screw head.
Design: Tip diamond-coated.
Dimensions: PZ 2
Length: 50 mm
PU piece: 10"

£3.16


Bits part no. 64580015

"Bits for Cross Head Screws Pozidriv 1/4"" DIN 3126 E6.3, BiTorsion®
Description of Design:

Extra-hard - for gentle screwing in wood to prevent breakage.

Tough-hard - for hard screwing in metal and sheet metal to prevent breakage.

Torsion - load peaks in the torsion zone of the bit are cushioned for longer life of the bits.

BiTorsion® - the torsion zone of the BiTorsion® bit has a higher hardness of 20 % compared with the shank. It serves to cushion torque peaks.

Diamond-coated - for universal use, long life. Very small diamond particles adhere to the screw and ensure secure seating of the tool in the screw head.
Design: Tip diamond-coated.
Dimensions: PZ 3
Length: 50 mm
PU piece: 10"

£3.16


Bits part no. 64590008

"Bits for TORX® socket screws 1/4"" DIN 3126 E6.3, with hole, extra long version
Description of Design:

Extra-hard - for gentle screwing in wood to prevent breakage.

Tough-hard - for hard screwing in metal and sheet metal to prevent breakage.

Torsion - load peaks in the torsion zone of the bit are cushioned for longer life of the bits.

BiTorsion® - the torsion zone of the BiTorsion® bit has a higher hardness of 20 % compared with the shank. It serves to cushion torque peaks.

Diamond-coated - for universal use, long life. Very small diamond particles adhere to the screw and ensure secure seating of the tool in the screw head.
Design: Tip toughened.
Size: T 8
Length: 89 mm
PU piece: 10"

£5.38


Bits part no. 64590010

"Bits for TORX® socket screws 1/4"" DIN 3126 E6.3, with hole, extra long version
Description of Design:

Extra-hard - for gentle screwing in wood to prevent breakage.

Tough-hard - for hard screwing in metal and sheet metal to prevent breakage.

Torsion - load peaks in the torsion zone of the bit are cushioned for longer life of the bits.

BiTorsion® - the torsion zone of the BiTorsion® bit has a higher hardness of 20 % compared with the shank. It serves to cushion torque peaks.

Diamond-coated - for universal use, long life. Very small diamond particles adhere to the screw and ensure secure seating of the tool in the screw head.
Design: Tip toughened.
Size: T 10
Length: 89 mm
PU piece: 10"

£5.46


Bits part no. 64590015

"Bits for TORX® socket screws 1/4"" DIN 3126 E6.3, with hole, extra long version
Description of Design:

Extra-hard - for gentle screwing in wood to prevent breakage.

Tough-hard - for hard screwing in metal and sheet metal to prevent breakage.

Torsion - load peaks in the torsion zone of the bit are cushioned for longer life of the bits.

BiTorsion® - the torsion zone of the BiTorsion® bit has a higher hardness of 20 % compared with the shank. It serves to cushion torque peaks.

Diamond-coated - for universal use, long life. Very small diamond particles adhere to the screw and ensure secure seating of the tool in the screw head.
Design: Tip toughened.
Size: T 15
Length: 89 mm
PU piece: 10"

£5.46


Bits part no. 64590020

"Bits for TORX® socket screws 1/4"" DIN 3126 E6.3, with hole, extra long version
Description of Design:

Extra-hard - for gentle screwing in wood to prevent breakage.

Tough-hard - for hard screwing in metal and sheet metal to prevent breakage.

Torsion - load peaks in the torsion zone of the bit are cushioned for longer life of the bits.

BiTorsion® - the torsion zone of the BiTorsion® bit has a higher hardness of 20 % compared with the shank. It serves to cushion torque peaks.

Diamond-coated - for universal use, long life. Very small diamond particles adhere to the screw and ensure secure seating of the tool in the screw head.
Design: Tip toughened.
Size: T 20
Length: 89 mm
PU piece: 10"

£5.46


Bits part no. 64590025

"Bits for TORX® socket screws 1/4"" DIN 3126 E6.3, with hole, extra long version
Description of Design:

Extra-hard - for gentle screwing in wood to prevent breakage.

Tough-hard - for hard screwing in metal and sheet metal to prevent breakage.

Torsion - load peaks in the torsion zone of the bit are cushioned for longer life of the bits.

BiTorsion® - the torsion zone of the BiTorsion® bit has a higher hardness of 20 % compared with the shank. It serves to cushion torque peaks.

Diamond-coated - for universal use, long life. Very small diamond particles adhere to the screw and ensure secure seating of the tool in the screw head.
Design: Tip toughened.
Size: T 25
Length: 89 mm
PU piece: 10"

£5.46


Bits part no. 64590030

"Bits for TORX® socket screws 1/4"" DIN 3126 E6.3, with hole, extra long version
Description of Design:

Extra-hard - for gentle screwing in wood to prevent breakage.

Tough-hard - for hard screwing in metal and sheet metal to prevent breakage.

Torsion - load peaks in the torsion zone of the bit are cushioned for longer life of the bits.

BiTorsion® - the torsion zone of the BiTorsion® bit has a higher hardness of 20 % compared with the shank. It serves to cushion torque peaks.

Diamond-coated - for universal use, long life. Very small diamond particles adhere to the screw and ensure secure seating of the tool in the screw head.
Design: Tip toughened.
Size: T 30
Length: 89 mm
PU piece: 10"

£5.46


Bits part no. 64590040

"Bits for TORX® socket screws 1/4"" DIN 3126 E6.3, with hole, extra long version
Description of Design:

Extra-hard - for gentle screwing in wood to prevent breakage.

Tough-hard - for hard screwing in metal and sheet metal to prevent breakage.

Torsion - load peaks in the torsion zone of the bit are cushioned for longer life of the bits.

BiTorsion® - the torsion zone of the BiTorsion® bit has a higher hardness of 20 % compared with the shank. It serves to cushion torque peaks.

Diamond-coated - for universal use, long life. Very small diamond particles adhere to the screw and ensure secure seating of the tool in the screw head.
Design: Tip toughened.
Size: T 40
Length: 89 mm
PU piece: 10"

£5.46


Bits part no. 64600006

"Socket Wrenches 1/4"" DIN 3126 E 6.3, metric
Design: With powerful permanent magnet.
Description of Design:

Extra-hard - for gentle screwing in wood to prevent breakage.

Tough-hard - for hard screwing in metal and sheet metal to prevent breakage.

Torsion - load peaks in the torsion zone of the bit are cushioned for longer life of the bits.

BiTorsion® - the torsion zone of the BiTorsion® bit has a higher hardness of 20 % compared with the shank. It serves to cushion torque peaks.

Diamond-coated - for universal use, long life. Very small diamond particles adhere to the screw and ensure secure seating of the tool in the screw head.
Key width: 5.5 mm
Length: 50 mm"

£2.75


Bits part no. 64600011

"Socket Wrenches 1/4"" DIN 3126 E 6.3, metric
Design: With powerful permanent magnet.
Description of Design:

Extra-hard - for gentle screwing in wood to prevent breakage.

Tough-hard - for hard screwing in metal and sheet metal to prevent breakage.

Torsion - load peaks in the torsion zone of the bit are cushioned for longer life of the bits.

BiTorsion® - the torsion zone of the BiTorsion® bit has a higher hardness of 20 % compared with the shank. It serves to cushion torque peaks.

Diamond-coated - for universal use, long life. Very small diamond particles adhere to the screw and ensure secure seating of the tool in the screw head.
Key width: 6 mm
Length: 50 mm"

£2.75


Bits part no. 64600016

"Socket Wrenches 1/4"" DIN 3126 E 6.3, metric
Design: With powerful permanent magnet.
Description of Design:

Extra-hard - for gentle screwing in wood to prevent breakage.

Tough-hard - for hard screwing in metal and sheet metal to prevent breakage.

Torsion - load peaks in the torsion zone of the bit are cushioned for longer life of the bits.

BiTorsion® - the torsion zone of the BiTorsion® bit has a higher hardness of 20 % compared with the shank. It serves to cushion torque peaks.

Diamond-coated - for universal use, long life. Very small diamond particles adhere to the screw and ensure secure seating of the tool in the screw head.
Key width: 7 mm
Length: 50 mm"

£2.75


Bits part no. 64600021

"Socket Wrenches 1/4"" DIN 3126 E 6.3, metric
Design: With powerful permanent magnet.
Description of Design:

Extra-hard - for gentle screwing in wood to prevent breakage.

Tough-hard - for hard screwing in metal and sheet metal to prevent breakage.

Torsion - load peaks in the torsion zone of the bit are cushioned for longer life of the bits.

BiTorsion® - the torsion zone of the BiTorsion® bit has a higher hardness of 20 % compared with the shank. It serves to cushion torque peaks.

Diamond-coated - for universal use, long life. Very small diamond particles adhere to the screw and ensure secure seating of the tool in the screw head.
Key width: 8 mm
Length: 50 mm"

£2.75


Bits part no. 64600026

"Socket Wrenches 1/4"" DIN 3126 E 6.3, metric
Design: With powerful permanent magnet.
Description of Design:

Extra-hard - for gentle screwing in wood to prevent breakage.

Tough-hard - for hard screwing in metal and sheet metal to prevent breakage.

Torsion - load peaks in the torsion zone of the bit are cushioned for longer life of the bits.

BiTorsion® - the torsion zone of the BiTorsion® bit has a higher hardness of 20 % compared with the shank. It serves to cushion torque peaks.

Diamond-coated - for universal use, long life. Very small diamond particles adhere to the screw and ensure secure seating of the tool in the screw head.
Key width: 9 mm
Length: 50 mm"

£2.75


Bits part no. 64600031

"Socket Wrenches 1/4"" DIN 3126 E 6.3, metric
Design: With powerful permanent magnet.
Description of Design:

Extra-hard - for gentle screwing in wood to prevent breakage.

Tough-hard - for hard screwing in metal and sheet metal to prevent breakage.

Torsion - load peaks in the torsion zone of the bit are cushioned for longer life of the bits.

BiTorsion® - the torsion zone of the BiTorsion® bit has a higher hardness of 20 % compared with the shank. It serves to cushion torque peaks.

Diamond-coated - for universal use, long life. Very small diamond particles adhere to the screw and ensure secure seating of the tool in the screw head.
Key width: 10 mm
Length: 50 mm"

£2.75


Bits part no. 64600036

"Socket Wrenches 1/4"" DIN 3126 E 6.3, metric
Design: With powerful permanent magnet.
Description of Design:

Extra-hard - for gentle screwing in wood to prevent breakage.

Tough-hard - for hard screwing in metal and sheet metal to prevent breakage.

Torsion - load peaks in the torsion zone of the bit are cushioned for longer life of the bits.

BiTorsion® - the torsion zone of the BiTorsion® bit has a higher hardness of 20 % compared with the shank. It serves to cushion torque peaks.

Diamond-coated - for universal use, long life. Very small diamond particles adhere to the screw and ensure secure seating of the tool in the screw head.
Key width: 12 mm
Length: 50 mm"

£3.31


Bits part no. 64600041

"Socket Wrenches 1/4"" DIN 3126 E 6.3, metric
Design: With powerful permanent magnet.
Description of Design:

Extra-hard - for gentle screwing in wood to prevent breakage.

Tough-hard - for hard screwing in metal and sheet metal to prevent breakage.

Torsion - load peaks in the torsion zone of the bit are cushioned for longer life of the bits.

BiTorsion® - the torsion zone of the BiTorsion® bit has a higher hardness of 20 % compared with the shank. It serves to cushion torque peaks.

Diamond-coated - for universal use, long life. Very small diamond particles adhere to the screw and ensure secure seating of the tool in the screw head.
Key width: 13 mm
Length: 50 mm"

£3.31


Bits part no. 64600046

"Socket Wrenches 1/4"" DIN 3126 E 6.3, inches
Design: With powerful permanent magnet.
Description of Design:

Extra-hard - for gentle screwing in wood to prevent breakage.

Tough-hard - for hard screwing in metal and sheet metal to prevent breakage.

Torsion - load peaks in the torsion zone of the bit are cushioned for longer life of the bits.

BiTorsion® - the torsion zone of the BiTorsion® bit has a higher hardness of 20 % compared with the shank. It serves to cushion torque peaks.

Diamond-coated - for universal use, long life. Very small diamond particles adhere to the screw and ensure secure seating of the tool in the screw head.
Key width: 1/4 inch
Length: 50 mm"

£2.87


Bits part no. 64600051

"Socket Wrenches 1/4"" DIN 3126 E 6.3, inches
Design: With powerful permanent magnet.
Description of Design:

Extra-hard - for gentle screwing in wood to prevent breakage.

Tough-hard - for hard screwing in metal and sheet metal to prevent breakage.

Torsion - load peaks in the torsion zone of the bit are cushioned for longer life of the bits.

BiTorsion® - the torsion zone of the BiTorsion® bit has a higher hardness of 20 % compared with the shank. It serves to cushion torque peaks.

Diamond-coated - for universal use, long life. Very small diamond particles adhere to the screw and ensure secure seating of the tool in the screw head.
Key width: 5/16 inch
Length: 50 mm"

£3.22


Bits part no. 64600056

"Socket Wrenches 1/4"" DIN 3126 E 6.3, inches
Design: With powerful permanent magnet.
Description of Design:

Extra-hard - for gentle screwing in wood to prevent breakage.

Tough-hard - for hard screwing in metal and sheet metal to prevent breakage.

Torsion - load peaks in the torsion zone of the bit are cushioned for longer life of the bits.

BiTorsion® - the torsion zone of the BiTorsion® bit has a higher hardness of 20 % compared with the shank. It serves to cushion torque peaks.

Diamond-coated - for universal use, long life. Very small diamond particles adhere to the screw and ensure secure seating of the tool in the screw head.
Key width: 3/8 inch
Length: 50 mm"

£3.22


Bits part no. 64620005

"Bits for Slotted Head Screws 5/16"" DIN 3126 C 8
Description of Design:

Extra-hard - for gentle screwing in wood to prevent breakage.

Tough-hard - for hard screwing in metal and sheet metal to prevent breakage.

Torsion - load peaks in the torsion zone of the bit are cushioned for longer life of the bits.

BiTorsion® - the torsion zone of the BiTorsion® bit has a higher hardness of 20 % compared with the shank. It serves to cushion torque peaks.

Diamond-coated - for universal use, long life. Very small diamond particles adhere to the screw and ensure secure seating of the tool in the screw head.
Design: Drift, toughened.
Blade width: 5.5 mm
Blade thickness: 1 mm
Length: 41 mm
PU piece: 10"

£2.17


Bits part no. 64620010

"Bits for Slotted Head Screws 5/16"" DIN 3126 C 8
Description of Design:

Extra-hard - for gentle screwing in wood to prevent breakage.

Tough-hard - for hard screwing in metal and sheet metal to prevent breakage.

Torsion - load peaks in the torsion zone of the bit are cushioned for longer life of the bits.

BiTorsion® - the torsion zone of the BiTorsion® bit has a higher hardness of 20 % compared with the shank. It serves to cushion torque peaks.

Diamond-coated - for universal use, long life. Very small diamond particles adhere to the screw and ensure secure seating of the tool in the screw head.
Design: Drift, toughened.
Blade width: 6.5 mm
Blade thickness: 1.2 mm
Length: 41 mm
PU piece: 10"

£2.17


Bits part no. 64620015

"Bits for Slotted Head Screws 5/16"" DIN 3126 C 8
Description of Design:

Extra-hard - for gentle screwing in wood to prevent breakage.

Tough-hard - for hard screwing in metal and sheet metal to prevent breakage.

Torsion - load peaks in the torsion zone of the bit are cushioned for longer life of the bits.

BiTorsion® - the torsion zone of the BiTorsion® bit has a higher hardness of 20 % compared with the shank. It serves to cushion torque peaks.

Diamond-coated - for universal use, long life. Very small diamond particles adhere to the screw and ensure secure seating of the tool in the screw head.
Design: Drift, toughened.
Blade width: 8 mm
Blade thickness: 1.2 mm
Length: 41 mm
PU piece: 10"

£2.17


Bits part no. 64620020

"Bits for Slotted Head Screws 5/16"" DIN 3126 C 8
Description of Design:

Extra-hard - for gentle screwing in wood to prevent breakage.

Tough-hard - for hard screwing in metal and sheet metal to prevent breakage.

Torsion - load peaks in the torsion zone of the bit are cushioned for longer life of the bits.

BiTorsion® - the torsion zone of the BiTorsion® bit has a higher hardness of 20 % compared with the shank. It serves to cushion torque peaks.

Diamond-coated - for universal use, long life. Very small diamond particles adhere to the screw and ensure secure seating of the tool in the screw head.
Design: Drift, toughened.
Blade width: 10 mm
Blade thickness: 1.6 mm
Length: 41 mm
PU piece: 10"

£4.63


Bits part no. 64620025

"Bits for Slotted Head Screws 5/16"" DIN 3126 C 8
Description of Design:

Extra-hard - for gentle screwing in wood to prevent breakage.

Tough-hard - for hard screwing in metal and sheet metal to prevent breakage.

Torsion - load peaks in the torsion zone of the bit are cushioned for longer life of the bits.

BiTorsion® - the torsion zone of the BiTorsion® bit has a higher hardness of 20 % compared with the shank. It serves to cushion torque peaks.

Diamond-coated - for universal use, long life. Very small diamond particles adhere to the screw and ensure secure seating of the tool in the screw head.
Design: Drift, toughened.
Blade width: 12 mm
Blade thickness: 2 mm
Length: 41 mm
PU piece: 10"

£4.63


Bits part no. 64620030

"Bits for Slotted Head Screws 5/16"" DIN 3126 C 8
Description of Design:

Extra-hard - for gentle screwing in wood to prevent breakage.

Tough-hard - for hard screwing in metal and sheet metal to prevent breakage.

Torsion - load peaks in the torsion zone of the bit are cushioned for longer life of the bits.

BiTorsion® - the torsion zone of the BiTorsion® bit has a higher hardness of 20 % compared with the shank. It serves to cushion torque peaks.

Diamond-coated - for universal use, long life. Very small diamond particles adhere to the screw and ensure secure seating of the tool in the screw head.
Design: Drift, toughened.
Blade width: 14 mm
Blade thickness: 2.5 mm
Length: 41 mm
PU piece: 10"

£5.24


Bits part no. 64640005

"Bits for Cross Recess Screws Phillips 5/16"" DIN 3126 C 8, tip tough-hard.
Description of Design:

Extra-hard - for gentle screwing in wood to prevent breakage.

Tough-hard - for hard screwing in metal and sheet metal to prevent breakage.

Torsion - load peaks in the torsion zone of the bit are cushioned for longer life of the bits.

BiTorsion® - the torsion zone of the BiTorsion® bit has a higher hardness of 20 % compared with the shank. It serves to cushion torque peaks.

Diamond-coated - for universal use, long life. Very small diamond particles adhere to the screw and ensure secure seating of the tool in the screw head.
Size: 1
Length: 32 mm
PU piece: 10"

£1.54


Bits part no. 64640010

"Bits for Cross Recess Screws Phillips 5/16"" DIN 3126 C 8, tip tough-hard.
Description of Design:

Extra-hard - for gentle screwing in wood to prevent breakage.

Tough-hard - for hard screwing in metal and sheet metal to prevent breakage.

Torsion - load peaks in the torsion zone of the bit are cushioned for longer life of the bits.

BiTorsion® - the torsion zone of the BiTorsion® bit has a higher hardness of 20 % compared with the shank. It serves to cushion torque peaks.

Diamond-coated - for universal use, long life. Very small diamond particles adhere to the screw and ensure secure seating of the tool in the screw head.
Size: 2
Length: 32 mm
PU piece: 10"

£1.54


Bits part no. 64640015

"Bits for Cross Recess Screws Phillips 5/16"" DIN 3126 C 8, tip tough-hard.
Description of Design:

Extra-hard - for gentle screwing in wood to prevent breakage.

Tough-hard - for hard screwing in metal and sheet metal to prevent breakage.

Torsion - load peaks in the torsion zone of the bit are cushioned for longer life of the bits.

BiTorsion® - the torsion zone of the BiTorsion® bit has a higher hardness of 20 % compared with the shank. It serves to cushion torque peaks.

Diamond-coated - for universal use, long life. Very small diamond particles adhere to the screw and ensure secure seating of the tool in the screw head.
Size: 3
Length: 32 mm
PU piece: 10"

£1.54


Bits part no. 64640020

"Bits for Cross Recess Screws Phillips 5/16"" DIN 3126 C 8, tip tough-hard.
Description of Design:

Extra-hard - for gentle screwing in wood to prevent breakage.

Tough-hard - for hard screwing in metal and sheet metal to prevent breakage.

Torsion - load peaks in the torsion zone of the bit are cushioned for longer life of the bits.

BiTorsion® - the torsion zone of the BiTorsion® bit has a higher hardness of 20 % compared with the shank. It serves to cushion torque peaks.

Diamond-coated - for universal use, long life. Very small diamond particles adhere to the screw and ensure secure seating of the tool in the screw head.
Size: 4
Length: 32 mm
PU piece: 10"

£1.54


Bits part no. 64660005

"Bits for Cross Recess Screws Pozidriv 5/16"" DIN 3126 C 8, tip tough-hard
Description of Design:

Extra-hard - for gentle screwing in wood to prevent breakage.

Tough-hard - for hard screwing in metal and sheet metal to prevent breakage.

Torsion - load peaks in the torsion zone of the bit are cushioned for longer life of the bits.

BiTorsion® - the torsion zone of the BiTorsion® bit has a higher hardness of 20 % compared with the shank. It serves to cushion torque peaks.

Diamond-coated - for universal use, long life. Very small diamond particles adhere to the screw and ensure secure seating of the tool in the screw head.
Size: 1
Length: 32 mm
PU piece: 10"

£1.54


Bits part no. 64660010

"Bits for Cross Recess Screws Pozidriv 5/16"" DIN 3126 C 8, tip tough-hard
Description of Design:

Extra-hard - for gentle screwing in wood to prevent breakage.

Tough-hard - for hard screwing in metal and sheet metal to prevent breakage.

Torsion - load peaks in the torsion zone of the bit are cushioned for longer life of the bits.

BiTorsion® - the torsion zone of the BiTorsion® bit has a higher hardness of 20 % compared with the shank. It serves to cushion torque peaks.

Diamond-coated - for universal use, long life. Very small diamond particles adhere to the screw and ensure secure seating of the tool in the screw head.
Size: 2
Length: 32 mm
PU piece: 10"

£1.54


Bits part no. 64660015

"Bits for Cross Recess Screws Pozidriv 5/16"" DIN 3126 C 8, tip tough-hard
Description of Design:

Extra-hard - for gentle screwing in wood to prevent breakage.

Tough-hard - for hard screwing in metal and sheet metal to prevent breakage.

Torsion - load peaks in the torsion zone of the bit are cushioned for longer life of the bits.

BiTorsion® - the torsion zone of the BiTorsion® bit has a higher hardness of 20 % compared with the shank. It serves to cushion torque peaks.

Diamond-coated - for universal use, long life. Very small diamond particles adhere to the screw and ensure secure seating of the tool in the screw head.
Size: 3
Length: 32 mm
PU piece: 10"

£1.54


Bits part no. 64660020

"Bits for Cross Recess Screws Pozidriv 5/16"" DIN 3126 C 8, tip tough-hard
Description of Design:

Extra-hard - for gentle screwing in wood to prevent breakage.

Tough-hard - for hard screwing in metal and sheet metal to prevent breakage.

Torsion - load peaks in the torsion zone of the bit are cushioned for longer life of the bits.

BiTorsion® - the torsion zone of the BiTorsion® bit has a higher hardness of 20 % compared with the shank. It serves to cushion torque peaks.

Diamond-coated - for universal use, long life. Very small diamond particles adhere to the screw and ensure secure seating of the tool in the screw head.
Size: 4
Length: 32 mm
PU piece: 10"

£1.54


Bits part no. 64680005

"Bits for Hexagon Socket Screws 5/16"" DIN 3126 C 8
Description of Design:

Extra-hard - for gentle screwing in wood to prevent breakage.

Tough-hard - for hard screwing in metal and sheet metal to prevent breakage.

Torsion - load peaks in the torsion zone of the bit are cushioned for longer life of the bits.

BiTorsion® - the torsion zone of the BiTorsion® bit has a higher hardness of 20 % compared with the shank. It serves to cushion torque peaks.

Diamond-coated - for universal use, long life. Very small diamond particles adhere to the screw and ensure secure seating of the tool in the screw head.
Design: The Hex-Plus geometry permits a higher static torque of max. 35 %, Hex-Plus®, tip tough-hard.
Key width: 3 mm
Length: 30 mm
PU piece: 10"

£2.20


Bits part no. 64680010

"Bits for Hexagon Socket Screws 5/16"" DIN 3126 C 8
Description of Design:

Extra-hard - for gentle screwing in wood to prevent breakage.

Tough-hard - for hard screwing in metal and sheet metal to prevent breakage.

Torsion - load peaks in the torsion zone of the bit are cushioned for longer life of the bits.

BiTorsion® - the torsion zone of the BiTorsion® bit has a higher hardness of 20 % compared with the shank. It serves to cushion torque peaks.

Diamond-coated - for universal use, long life. Very small diamond particles adhere to the screw and ensure secure seating of the tool in the screw head.
Design: The Hex-Plus geometry permits a higher static torque of max. 35 %, Hex-Plus®, tip tough-hard.
Key width: 4 mm
Length: 30 mm
PU piece: 10"

£2.20


Bits part no. 64680015

"Bits for Hexagon Socket Screws 5/16"" DIN 3126 C 8
Description of Design:

Extra-hard - for gentle screwing in wood to prevent breakage.

Tough-hard - for hard screwing in metal and sheet metal to prevent breakage.

Torsion - load peaks in the torsion zone of the bit are cushioned for longer life of the bits.

BiTorsion® - the torsion zone of the BiTorsion® bit has a higher hardness of 20 % compared with the shank. It serves to cushion torque peaks.

Diamond-coated - for universal use, long life. Very small diamond particles adhere to the screw and ensure secure seating of the tool in the screw head.
Design: The Hex-Plus geometry permits a higher static torque of max. 35 %, Hex-Plus®, tip tough-hard.
Key width: 5 mm
Length: 30 mm
PU piece: 10"

£2.20


Bits part no. 64680020

"Bits for Hexagon Socket Screws 5/16"" DIN 3126 C 8
Description of Design:

Extra-hard - for gentle screwing in wood to prevent breakage.

Tough-hard - for hard screwing in metal and sheet metal to prevent breakage.

Torsion - load peaks in the torsion zone of the bit are cushioned for longer life of the bits.

BiTorsion® - the torsion zone of the BiTorsion® bit has a higher hardness of 20 % compared with the shank. It serves to cushion torque peaks.

Diamond-coated - for universal use, long life. Very small diamond particles adhere to the screw and ensure secure seating of the tool in the screw head.
Design: The Hex-Plus geometry permits a higher static torque of max. 35 %, Hex-Plus®, tip tough-hard.
Key width: 6 mm
Length: 30 mm
PU piece: 10"

£2.20


Bits part no. 64680025

"Bits for Hexagon Socket Screws 5/16"" DIN 3126 C 8
Description of Design:

Extra-hard - for gentle screwing in wood to prevent breakage.

Tough-hard - for hard screwing in metal and sheet metal to prevent breakage.

Torsion - load peaks in the torsion zone of the bit are cushioned for longer life of the bits.

BiTorsion® - the torsion zone of the BiTorsion® bit has a higher hardness of 20 % compared with the shank. It serves to cushion torque peaks.

Diamond-coated - for universal use, long life. Very small diamond particles adhere to the screw and ensure secure seating of the tool in the screw head.
Design: The Hex-Plus geometry permits a higher static torque of max. 35 %, Hex-Plus®, tip tough-hard.
Key width: 8 mm
Length: 30 mm
PU piece: 10"

£2.20


Bits part no. 64700005

"Bits for TORX® Screws 5/16"" DIN 3126 C 8
Description of Design:

Extra-hard - for gentle screwing in wood to prevent breakage.

Tough-hard - for hard screwing in metal and sheet metal to prevent breakage.

Torsion - load peaks in the torsion zone of the bit are cushioned for longer life of the bits.

BiTorsion® - the torsion zone of the BiTorsion® bit has a higher hardness of 20 % compared with the shank. It serves to cushion torque peaks.

Diamond-coated - for universal use, long life. Very small diamond particles adhere to the screw and ensure secure seating of the tool in the screw head.
Design: Drift, toughened.
Dimensions: T 20
Length: 35 mm
PU piece: 10"

£2.52


Bits part no. 64700010

"Bits for TORX® Screws 5/16"" DIN 3126 C 8
Description of Design:

Extra-hard - for gentle screwing in wood to prevent breakage.

Tough-hard - for hard screwing in metal and sheet metal to prevent breakage.

Torsion - load peaks in the torsion zone of the bit are cushioned for longer life of the bits.

BiTorsion® - the torsion zone of the BiTorsion® bit has a higher hardness of 20 % compared with the shank. It serves to cushion torque peaks.

Diamond-coated - for universal use, long life. Very small diamond particles adhere to the screw and ensure secure seating of the tool in the screw head.
Design: Drift, toughened.
Dimensions: T 25
Length: 35 mm
PU piece: 10"

£2.52


Bits part no. 64700015

"Bits for TORX® Screws 5/16"" DIN 3126 C 8
Description of Design:

Extra-hard - for gentle screwing in wood to prevent breakage.

Tough-hard - for hard screwing in metal and sheet metal to prevent breakage.

Torsion - load peaks in the torsion zone of the bit are cushioned for longer life of the bits.

BiTorsion® - the torsion zone of the BiTorsion® bit has a higher hardness of 20 % compared with the shank. It serves to cushion torque peaks.

Diamond-coated - for universal use, long life. Very small diamond particles adhere to the screw and ensure secure seating of the tool in the screw head.
Design: Drift, toughened.
Dimensions: T 27
Length: 35 mm
PU piece: 10"

£2.52


Bits part no. 64700020

"Bits for TORX® Screws 5/16"" DIN 3126 C 8
Description of Design:

Extra-hard - for gentle screwing in wood to prevent breakage.

Tough-hard - for hard screwing in metal and sheet metal to prevent breakage.

Torsion - load peaks in the torsion zone of the bit are cushioned for longer life of the bits.

BiTorsion® - the torsion zone of the BiTorsion® bit has a higher hardness of 20 % compared with the shank. It serves to cushion torque peaks.

Diamond-coated - for universal use, long life. Very small diamond particles adhere to the screw and ensure secure seating of the tool in the screw head.
Design: Drift, toughened.
Dimensions: T 30
Length: 35 mm
PU piece: 10"

£2.52


Bits part no. 64700025

"Bits for TORX® Screws 5/16"" DIN 3126 C 8
Description of Design:

Extra-hard - for gentle screwing in wood to prevent breakage.

Tough-hard - for hard screwing in metal and sheet metal to prevent breakage.

Torsion - load peaks in the torsion zone of the bit are cushioned for longer life of the bits.

BiTorsion® - the torsion zone of the BiTorsion® bit has a higher hardness of 20 % compared with the shank. It serves to cushion torque peaks.

Diamond-coated - for universal use, long life. Very small diamond particles adhere to the screw and ensure secure seating of the tool in the screw head.
Design: Drift, toughened.
Dimensions: T 40
Length: 35 mm
PU piece: 10"

£2.52


Bits part no. 64700030

"Bits for TORX® Screws 5/16"" DIN 3126 C 8
Description of Design:

Extra-hard - for gentle screwing in wood to prevent breakage.

Tough-hard - for hard screwing in metal and sheet metal to prevent breakage.

Torsion - load peaks in the torsion zone of the bit are cushioned for longer life of the bits.

BiTorsion® - the torsion zone of the BiTorsion® bit has a higher hardness of 20 % compared with the shank. It serves to cushion torque peaks.

Diamond-coated - for universal use, long life. Very small diamond particles adhere to the screw and ensure secure seating of the tool in the screw head.
Design: Drift, toughened.
Dimensions: T 45
Length: 35 mm
PU piece: 10"

£2.52


Bits part no. 64700035

"Bits for TORX® Screws 5/16"" DIN 3126 C 8
Description of Design:

Extra-hard - for gentle screwing in wood to prevent breakage.

Tough-hard - for hard screwing in metal and sheet metal to prevent breakage.

Torsion - load peaks in the torsion zone of the bit are cushioned for longer life of the bits.

BiTorsion® - the torsion zone of the BiTorsion® bit has a higher hardness of 20 % compared with the shank. It serves to cushion torque peaks.

Diamond-coated - for universal use, long life. Very small diamond particles adhere to the screw and ensure secure seating of the tool in the screw head.
Design: Drift, toughened.
Dimensions: T 50
Length: 35 mm
PU piece: 10"

£2.52


Bits part no. 64700040

"Bits for TORX® Screws 5/16"" DIN 3126 C 8
Description of Design:

Extra-hard - for gentle screwing in wood to prevent breakage.

Tough-hard - for hard screwing in metal and sheet metal to prevent breakage.

Torsion - load peaks in the torsion zone of the bit are cushioned for longer life of the bits.

BiTorsion® - the torsion zone of the BiTorsion® bit has a higher hardness of 20 % compared with the shank. It serves to cushion torque peaks.

Diamond-coated - for universal use, long life. Very small diamond particles adhere to the screw and ensure secure seating of the tool in the screw head.
Design: Drift, toughened.
Dimensions: T 55
Length: 35 mm
PU piece: 10"

£2.52


Bits part no. 64800003

"Bit Sets for Slotted and Cross Recess Screws, 7-piece, in folding holder
Description of Bits:
Extra-hard - for gentle screwing in wood to prevent breakage.
Tough-hard - for hard screwing in metal and sheet metal to prevent breakage.
Torsion - load peaks in the torsion zone of the bit are cushioned for longer life of the bits.
BiTorsion® - The torsion zone of the BiTorsion® bit has a higher hardness of 20 % compared with the shank. It serves to cushion torque peaks.
Diamond-coated - for universal use, long life. Very small diamond particles adhere to the screw and ensure secure seating of the tool in the screw head.
Design: 7-piece, universal holder with permanent magnet, 1slotted head of each size: 4.5 x 0.6, 5.5 x 0.8 mm; 1 cross recess of each size: PH 1, PH 2, 1 cross head of each size: PZ 1, PZ 2."

£6.91


Bits part no. 64800005

"Bit Sets for Slotted and Cross Head Screws , 7-piece in Bit-Safe®
Description of Bits:
Extra-hard - for gentle screwing in wood to prevent breakage.
Tough-hard - for hard screwing in metal and sheet metal to prevent breakage.
Torsion - load peaks in the torsion zone of the bit are cushioned for longer life of the bits.
BiTorsion® - The torsion zone of the BiTorsion® bit has a higher hardness of 20 % compared with the shank. It serves to cushion torque peaks.
Diamond-coated - for universal use, long life. Very small diamond particles adhere to the screw and ensure secure seating of the tool in the screw head.
Design: Mini-set, universal holder with permanent magnet and snap ring, 1 slotted head of each size: 4.5 x 0.6, 5.5 x 0.8; 1 cross head of each size: PZ 1, PZ 2."

£8.64


Bits part no. 64800010

"Bit Sets for Slotted and Cross Recess Screws, 10-piece in Bit-Safe®
Description of Bits:
Extra-hard - for gentle screwing in wood to prevent breakage.
Tough-hard - for hard screwing in metal and sheet metal to prevent breakage.
Torsion - load peaks in the torsion zone of the bit are cushioned for longer life of the bits.
BiTorsion® - The torsion zone of the BiTorsion® bit has a higher hardness of 20 % compared with the shank. It serves to cushion torque peaks.
Diamond-coated - for universal use, long life. Very small diamond particles adhere to the screw and ensure secure seating of the tool in the screw head.
Design: Universal holder with permanent magnet and quick change chuck, 1 slotted head of each size: 5.5 x 0.8, 5.5 x 1, 6.5 x 1.2 mm; 1 cross recess of each size: PH 1, PH 2, PH 3; 1 cross recess of each size: PH 1, PH 2, PH 3;"

£17.34


Bits part no. 64800014

"Bit Assortments TORX®, 7-piece, Format
Description of Bits:
Extra-hard - for gentle screwing in wood to prevent breakage.
Tough-hard - for hard screwing in metal and sheet metal to prevent breakage.
Torsion - load peaks in the torsion zone of the bit are cushioned for longer life of the bits.
BiTorsion® - The torsion zone of the BiTorsion® bit has a higher hardness of 20 % compared with the shank. It serves to cushion torque peaks.
Diamond-coated - for universal use, long life. Very small diamond particles adhere to the screw and ensure secure seating of the tool in the screw head.
Design: In folding holder. Universal holder with permanent magnet, 1 TORX® of each size: T 10, T 15, T 20, T 25, T 30, T 40."

£7.19


Bits part no. 64800015

"Bit Sets for TORX® Socket Screws, 10-piece, Format
Description of Bits:
Extra-hard - for gentle screwing in wood to prevent breakage.
Tough-hard - for hard screwing in metal and sheet metal to prevent breakage.
Torsion - load peaks in the torsion zone of the bit are cushioned for longer life of the bits.
BiTorsion® - The torsion zone of the BiTorsion® bit has a higher hardness of 20 % compared with the shank. It serves to cushion torque peaks.
Diamond-coated - for universal use, long life. Very small diamond particles adhere to the screw and ensure secure seating of the tool in the screw head.
Design: Tip toughened, in Bit-Safe®. Universal holder with permanent magnet and quick change chuck, 1 TORX® of each size: T 7, T 8, T 9, T 10, T 15, T 20, T 25, T 30, T 40."

£20.40


Bits part no. 64800030

"Bit Sets for Slotted and Cross Recess Screws, 31-piece in Bit-Safe®
Description of Bits:
Extra-hard - for gentle screwing in wood to prevent breakage.
Tough-hard - for hard screwing in metal and sheet metal to prevent breakage.
Torsion - load peaks in the torsion zone of the bit are cushioned for longer life of the bits.
BiTorsion® - The torsion zone of the BiTorsion® bit has a higher hardness of 20 % compared with the shank. It serves to cushion torque peaks.
Diamond-coated - for universal use, long life. Very small diamond particles adhere to the screw and ensure secure seating of the tool in the screw head.
Design: Universal holder with permanent magnet, 1 slotted head of each size: 4.5 x 0.6, 5.5 x 1, 6.5 x 1.2 mm; 3 cross recess of each size: PH 1, PH 2, PH 3; 3 cross recess of each size: PZ 1, PZ 2, PZ 3; 1 TORX® of each size: T 10, T 15, T 20, T 25, T 30, T 40; 1 hex of each size: SW 4, SW 5, SW 6."

£18.53


Bits part no. 64820040

"Bit-Safe® Allround
Description of Bits:
Extra-hard - for gentle screwing in wood to prevent breakage.
Tough-hard - for hard screwing in metal and sheet metal to prevent breakage.
Torsion - load peaks in the torsion zone of the bit are cushioned for longer life of the bits.
BiTorsion® - The torsion zone of the BiTorsion® bit has a higher hardness of 20 % compared with the shank. It serves to cushion torque peaks.
Diamond-coated - for universal use, long life. Very small diamond particles adhere to the screw and ensure secure seating of the tool in the screw head.
Design: 32-piece, Kraftform® hand holder with quick change chuck, in plastic box. BiTorsion® Holder Rapidaptor® with quick change chuck, 1 TORX® of each size: T 10, T 15, T 20, T 25, T 30, T 40."

£52.57


Bits part no. 64820045

"Bit-Safe® Security
Description of Bits:
Extra-hard - for gentle screwing in wood to prevent breakage.
Tough-hard - for hard screwing in metal and sheet metal to prevent breakage.
Torsion - load peaks in the torsion zone of the bit are cushioned for longer life of the bits.
BiTorsion® - The torsion zone of the BiTorsion® bit has a higher hardness of 20 % compared with the shank. It serves to cushion torque peaks.
Diamond-coated - for universal use, long life. Very small diamond particles adhere to the screw and ensure secure seating of the tool in the screw head.
Design: 32-piece special set for locking screws, Kraftform® hand holder incl. quick change chuck, in plastic box, Kraftform® hand holder incl. quick change chuck,
Universal holder incl. quick change chuck
1each of wrench size 2, 3, 4, 5, 6 for hexagon socket with dowel pin
1 each No.4, No.6, No.8, No.10 for spanner screws
1 each T7, T8, T9, T10, T15, T20, T25, T30, T40 for TORX® screws with dowel pin
1 each No.6, No.8, No.10, No.1/4"" for TORQ-SET® screws
1 each No.1, No.2, No.3 for TRI-WING® screws
1 each No. 0, No.1, No.2, No.3 for SQUARE DRIVE screws"

£76.79


Bits part no. 64820055

"Kraftform Kompakt® 50, 14-piece
Description of Bits:
Extra-hard - for gentle screwing in wood to prevent breakage.
Tough-hard - for hard screwing in metal and sheet metal to prevent breakage.
Torsion - load peaks in the torsion zone of the bit are cushioned for longer life of the bits.
BiTorsion® - The torsion zone of the BiTorsion® bit has a higher hardness of 20 % compared with the shank. It serves to cushion torque peaks.
Diamond-coated - for universal use, long life. Very small diamond particles adhere to the screw and ensure secure seating of the tool in the screw head.
Design: Variable use for machine and hand screwing. Kraftform® hand holder with bajonet, in plastic box. Hand holder with bayonet, adapter bayonet with quick change chuck, 1 slotted head of each size: 4.5 x 0.6, 5.5 x 1 mm; 1 cross recess of each size: PH 1, PH 2; 1 cross recess of each size: PZ 1, PZ 2; 1 TORX® with hole T 10, T 15, T 20, T 25, T 30, T 40."

£50.74


Bits part no. 64820060

"BiTorsion®-Bit-Check®-Rapidaptor®, PH/PZ
Description of Bits:
Extra-hard - for gentle screwing in wood to prevent breakage.
Tough-hard - for hard screwing in metal and sheet metal to prevent breakage.
Torsion - load peaks in the torsion zone of the bit are cushioned for longer life of the bits.
BiTorsion® - The torsion zone of the BiTorsion® bit has a higher hardness of 20 % compared with the shank. It serves to cushion torque peaks.
Diamond-coated - for universal use, long life. Very small diamond particles adhere to the screw and ensure secure seating of the tool in the screw head.
Design: 7-piece, diamond-coated. BiTorsion® holder Rapidaptor® with quick change chuck, 1 slotted head of each size: 5.5 x 1, 6.5 x 1.2 mm; 1 cross recess of each size: PH 1, PH 2; 1 cross recess of each size: PZ 1, PZ 2."

£28.93


Bits part no. 64820065

"BiTorsion®-Bit-Check®-Rapidaptor®, PZ
Description of Bits:
Extra-hard - for gentle screwing in wood to prevent breakage.
Tough-hard - for hard screwing in metal and sheet metal to prevent breakage.
Torsion - load peaks in the torsion zone of the bit are cushioned for longer life of the bits.
BiTorsion® - The torsion zone of the BiTorsion® bit has a higher hardness of 20 % compared with the shank. It serves to cushion torque peaks.
Diamond-coated - for universal use, long life. Very small diamond particles adhere to the screw and ensure secure seating of the tool in the screw head.
Design: 7-piece, diamond-coated. BiTorsion® Holder Rapidaptor® with quick change chuck, 2 cross recess PZ 1; 3 cross recess PZ 2; 1 cross recess PZ 3."

£28.93


Bits part no. 64820070

"BiTorsion® Bit Check® Rapidaptor® TORX®, 10-piece, Wera
Description of Bits:
Extra-hard - for gentle screwing in wood to prevent breakage.
Tough-hard - for hard screwing in metal and sheet metal to prevent breakage.
Torsion - load peaks in the torsion zone of the bit are cushioned for longer life of the bits.
BiTorsion® - The torsion zone of the BiTorsion® bit has a higher hardness of 20 % compared with the shank. It serves to cushion torque peaks.
Diamond-coated - for universal use, long life. Very small diamond particles adhere to the screw and ensure secure seating of the tool in the screw head.
Design: 7-piece, diamond-coated. BiTorsion® Holder Rapidaptor® with quick change chuck, 1 TORX® of each size: T 10, T 15, T 20, T 25, T 30, T 40"

£30.13


Bits part no. 64820080

"BiTorsion®-Bit-Check®-Rapidaptor® TORX®
Description of Bits:
Extra-hard - for gentle screwing in wood to prevent breakage.
Tough-hard - for hard screwing in metal and sheet metal to prevent breakage.
Torsion - load peaks in the torsion zone of the bit are cushioned for longer life of the bits.
BiTorsion® - The torsion zone of the BiTorsion® bit has a higher hardness of 20 % compared with the shank. It serves to cushion torque peaks.
Diamond-coated - for universal use, long life. Very small diamond particles adhere to the screw and ensure secure seating of the tool in the screw head.
Design: 10-piece, tip toughened."

£39.58


Bits part no. 64820090

"Bit Sets WERA for Slotted, Cross Recess, Hexagon Socket and TORX® Screws, 31-piece
Description of Bits:
Extra-hard - for gentle screwing in wood to prevent breakage.
Tough-hard - for hard screwing in metal and sheet metal to prevent breakage.
Torsion - load peaks in the torsion zone of the bit are cushioned for longer life of the bits.
BiTorsion® - The torsion zone of the BiTorsion® bit has a higher hardness of 20 % compared with the shank. It serves to cushion torque peaks.
Diamond-coated - for universal use, long life. Very small diamond particles adhere to the screw and ensure secure seating of the tool in the screw head.
Design: Handy plastic box, with easy removal of tools, as they are arranged in a clear and space-saving way. Tough-hard tip.

Application: For hard screwing in metal and sheet metal etc.

Contents in plastic box:
1 bit holder Rapidaptor® with ring magnet (part no. 6428 0005)
3 bits for slotted screws 0.6 x 4.5; 1.0 x 5.5; 1.2 x 6.5 mm
3 bits for hexagon socket screws 4; 5; 6 mm
9 bits for cross recess screws PH 1 (3 each); PH 2 (3 each); PH 3 (3 each)
9 bits for cross recess screws PZ 1 (3 each); PZ 2 (3 each); PZ 3 (3 each)
6 bits for TORX® screws T 10; T 15; T 20; T 25; T 30; T 40"

£27.55


Bits part no. 64820100

"Bit Sets WERA for Slotted, Cross Recess, Hexagon Socket and TORX® Screws, 61-piece
Description of Bits:
Extra-hard - for gentle screwing in wood to prevent breakage.
Tough-hard - for hard screwing in metal and sheet metal to prevent breakage.
Torsion - load peaks in the torsion zone of the bit are cushioned for longer life of the bits.
BiTorsion® - The torsion zone of the BiTorsion® bit has a higher hardness of 20 % compared with the shank. It serves to cushion torque peaks.
Diamond-coated - for universal use, long life. Very small diamond particles adhere to the screw and ensure secure seating of the tool in the screw head.
Design: Handy plastic box, with easy removal of tools, as they are arranged in a clear and space-saving way. Tough-hard tip.

Application: For hard screwing in metal and sheet metal etc.

Contents in plastic box:
1 bit holder Rapidaptor® (part no. 6416 0005)
3 bits for slotted screws 0.6 x 4.5; 1.0 x 5.5; 1.2 x 6.5 mm
11 bits for hexagon socket screws 2.5 (3 each); 3 (3 each); 4 (3 each); 5 mm (2 each)
15 bits for cross recess screws PH 1 (3 each); PH 2 (10 each); PH 3 (2 each)
15 bits for cross recess screws PZ 1 (3 each); PZ 2 (10 each); PZ 3 (2 each)
16 bits for TORX® screws T 10 (2 each); T 15 (3 each); T 20 (3 each); T 25 (3 each); T 30 (3 each); T 40 (2 each)"

£35.54


Bits part no. 64820110

"Bit Sets WERA for Cross Recess and TORX® Screws, 61-piece
Description of Bits:
Extra-hard - for gentle screwing in wood to prevent breakage.
Tough-hard - for hard screwing in metal and sheet metal to prevent breakage.
Torsion - load peaks in the torsion zone of the bit are cushioned for longer life of the bits.
BiTorsion® - The torsion zone of the BiTorsion® bit has a higher hardness of 20 % compared with the shank. It serves to cushion torque peaks.
Diamond-coated - for universal use, long life. Very small diamond particles adhere to the screw and ensure secure seating of the tool in the screw head.
Design: Handy plastic box, with easy removal of tools, as they are arranged in a clear and space-saving way. Tough-hard tip.

Application: For hard screwing in metal and sheet metal.

Contents in plastic box:
1 bit holder Rapidaptor® (part no. 6416 0005)
3 bits for cross recess screws PH 2 (3 each)
35 bits for cross recess screws PZ 1 (10 each); PZ 2 (20 each); PZ 3 (5 each)
22 bits für TORX® screws T 10 (3 each); T 15 (5 each); T 20 (5 each); T 25 (5 each); T 30 (2 each); T 40 (2 each)"

£35.49


Bits part no. 64820120

"Bit Sets WERA for Cross Recess and TORX® Screws, 31-piece
Description of Bits:
Extra-hard - for gentle screwing in wood to prevent breakage.
Tough-hard - for hard screwing in metal and sheet metal to prevent breakage.
Torsion - load peaks in the torsion zone of the bit are cushioned for longer life of the bits.
BiTorsion® - The torsion zone of the BiTorsion® bit has a higher hardness of 20 % compared with the shank. It serves to cushion torque peaks.
Diamond-coated - for universal use, long life. Very small diamond particles adhere to the screw and ensure secure seating of the tool in the screw head.
Design: Handy plastic box, with easy removal of tools, as they are arranged in a clear and space-saving way. Tough-hard tip.

Application: For hard screwing in metal and sheet metal etc.

Contents in plastic box:
1 bit holder Rapidaptor® with ring magnet (part no. 6428 0005)
1 bit for cross recess screws PH 2
9 bits for cross recess screws PZ 1 (2 each); PZ 2 (5 each); PZ 3 (2 each)
20 bits for TORX® screws T 10 (3 each); T 15 (4 each); T 20 (4 each); T 25 (4 each); T 30 (4 each); T 40 (1 each)"

£30.31


Bits part no. 64820130

"BiTorsion®-Bit-Check®-Rapidaptor® with Ring Magnet, 10-piece
Description of Bits:
Extra-hard - for gentle screwing in wood to prevent breakage.
Tough-hard - for hard screwing in metal and sheet metal to prevent breakage.
Torsion - load peaks in the torsion zone of the bit are cushioned for longer life of the bits.
BiTorsion® - The torsion zone of the BiTorsion® bit has a higher hardness of 20 % compared with the shank. It serves to cushion torque peaks.
Diamond-coated - for universal use, long life. Very small diamond particles adhere to the screw and ensure secure seating of the tool in the screw head.
Design: 10-piece, handy plastic box, convenient removal of tools due to easy opening mechanism, Bit-Check locks in opening position. Stability and easy removal of tools at place of use is thereby ensured. Extra-hard tip.

Application: For gentle screwing in wood etc.
Set contents:
1 ring magnet Rapidaptor® with quick-change chuck
3 bits for cross recess screws PZ 1 x 25 mm
3 bits for cross recess screws PZ 2 x 25 mm
3 bits for cross recess screws PZ 3 x 25 mm"

£24.65


Bits part no. 64820200

"INOX BiTorsion®-Bit-Check®-Rapidaptor® Stainless, 10-piece for Cross Recess and TORX® Screws
Description of Bits:
Extra-hard - for gentle screwing in wood to prevent breakage.
Tough-hard - for hard screwing in metal and sheet metal to prevent breakage.
Torsion - load peaks in the torsion zone of the bit are cushioned for longer life of the bits.
BiTorsion® - The torsion zone of the BiTorsion® bit has a higher hardness of 20 % compared with the shank. It serves to cushion torque peaks.
Diamond-coated - for universal use, long life. Very small diamond particles adhere to the screw and ensure secure seating of the tool in the screw head.
Design: 10-piece, handy plastic box, convenient removal of tools due to easy opening mechanism, Bit-Check locks in opening position. Stability and easy removal of tools at place of use is thereby ensured.

Application: Especially for screwing of stainless steel screws to avoid extraneous rust.
Set contents:
1 bit holder Rapidaptor® Stainless
1 bit for cross recess screws PH 2
3 bits for cross recess screws 1 x PZ 1, 2 x PZ 2
5 bits for TORX® screws T 10; T 15; T 20; T 25; T 30"

£31.42


Bits part no. 64820210

"INOX BiTorsion®-Bit-Check®-Rapidaptor® Stainless, 10-piece for Cross Recess and Hexagon Socket Screws
Description of Bits:
Extra-hard - for gentle screwing in wood to prevent breakage.
Tough-hard - for hard screwing in metal and sheet metal to prevent breakage.
Torsion - load peaks in the torsion zone of the bit are cushioned for longer life of the bits.
BiTorsion® - The torsion zone of the BiTorsion® bit has a higher hardness of 20 % compared with the shank. It serves to cushion torque peaks.
Diamond-coated - for universal use, long life. Very small diamond particles adhere to the screw and ensure secure seating of the tool in the screw head.
Design: 10-piece, handy plastic box, convenient removal of tools due to easy opening mechanism, Bit-Check locks in opening position. Stability and easy removal of tools at place of use is thereby ensured.

Application: Especially for screwing of stainless steel screws to avoid extraneous rust.
Set contents:
1 bit holder Rapidaptor® Stainless
5 bits for cross recess screws 2 x PH 1; 2 x PH 2; 1 x PH 3
4 bits for hexagon socket screws 2.5; 3; 4; 4 mm"

£32.74


Bits part no. 64820220

"INOX BiTorsion®-Bit-Check®-Rapidaptor® Stainless, 10-piece for Cross Recess and TORX® Screws
Description of Bits:
Extra-hard - for gentle screwing in wood to prevent breakage.
Tough-hard - for hard screwing in metal and sheet metal to prevent breakage.
Torsion - load peaks in the torsion zone of the bit are cushioned for longer life of the bits.
BiTorsion® - The torsion zone of the BiTorsion® bit has a higher hardness of 20 % compared with the shank. It serves to cushion torque peaks.
Diamond-coated - for universal use, long life. Very small diamond particles adhere to the screw and ensure secure seating of the tool in the screw head.
Design: 10-piece, handy plastic box, convenient removal of tools due to easy opening mechanism, Bit-Check locks in opening position. Stability and easy removal of tools at place of use is thereby ensured.

Application: Especially for screwing of stainless steel screws to avoid extraneous rust.
Set contents:
1 bit holder Rapidaptor® Stainless (part no. 6428 0010)
3 bits for cross recess screws PZ 1; PZ 2; PZ 3
6 bits for TORX® screws with tenon T 10; T 15; T 20; T 25; T 30; T 40"

£31.42


Bits part no. 64830020

"Kraftform Kompakt® 91, 18-piece
Description of Bits:
Extra-hard - for gentle screwing in wood to prevent breakage.
Tough-hard - for hard screwing in metal and sheet metal to prevent breakage.
Torsion - load peaks in the torsion zone of the bit are cushioned for longer life of the bits.
BiTorsion® - The torsion zone of the BiTorsion® bit has a higher hardness of 20 % compared with the shank. It serves to cushion torque peaks.
Diamond-coated - for universal use, long life. Very small diamond particles adhere to the screw and ensure secure seating of the tool in the screw head.
Kraftform Kompakt® one-hand ratchet with right/left-hand motion, incl. quick change chuck, in plastic box.
Kraftform Kompakt® one-hand ratchet with quick change chuck, universal holder with permanent magnet and quick change chuck, adapter 1/4""
Socket wrenches:
1 cross recess of each size: PH 1, PH 2, PH 3
1 TORX® with bore hole of each size: T 15, T 20, T 25, T 30, T 40
1 hexagon of each wrench size: 3, 4, 5
1 socket wrench of each size: 5.5; 7; 8; 10; 13"

£91.89


Bits part no. 64960005

"Kraftform Kompakt® 40, 7-piece
Description of Bits:
Extra-hard - for gentle screwing in wood to prevent breakage.
Tough-hard - for hard screwing in metal and sheet metal to prevent breakage.
Torsion - load peaks in the torsion zone of the bit are cushioned for longer life of the bits.
BiTorsion® - The torsion zone of the BiTorsion® bit has a higher hardness of 20 % compared with the shank. It serves to cushion torque peaks.
Diamond-coated - for universal use, long life. Very small diamond particles adhere to the screw and ensure secure seating of the tool in the screw head.
Design: Wallet with 89 mm long bits. Hand holder with quick change chuck, 1 slotted head of each size: 5.5 x 1, 6.5 x 1.2 mm; 1 cross recess of each size: PH 1, PH 2; PZ 1, PZ 2."

£29.54


Bits part no. 64960010

"Kraftform Kompakt® 41, 11-piece
Description of Bits:
Extra-hard - for gentle screwing in wood to prevent breakage.
Tough-hard - for hard screwing in metal and sheet metal to prevent breakage.
Torsion - load peaks in the torsion zone of the bit are cushioned for longer life of the bits.
BiTorsion® - The torsion zone of the BiTorsion® bit has a higher hardness of 20 % compared with the shank. It serves to cushion torque peaks.
Diamond-coated - for universal use, long life. Very small diamond particles adhere to the screw and ensure secure seating of the tool in the screw head.
Design: Wallet with 89 mm long bits. Hand holder with quick change chuck, 1 cross recess of each size: PH 1, PH 2, PH 3; 1 cross recess of each size: PZ 1, PZ, PZ 3; 1 TORX® with hole of each size: T 15, T 20, T 25, T 30."

£38.19


Bits part no. 64960015

"Kraftform Kompakt® 60, 17-piece
Description of Bits:
Extra-hard - for gentle screwing in wood to prevent breakage.
Tough-hard - for hard screwing in metal and sheet metal to prevent breakage.
Torsion - load peaks in the torsion zone of the bit are cushioned for longer life of the bits.
BiTorsion® - The torsion zone of the BiTorsion® bit has a higher hardness of 20 % compared with the shank. It serves to cushion torque peaks.
Diamond-coated - for universal use, long life. Very small diamond particles adhere to the screw and ensure secure seating of the tool in the screw head.
Design: Wallet with 89 mm long bits. Hand holder with quick change chuck, 1 slotted head of each size: 5.5 x 1 mm; 1 cross recess of each size: PH 1, PH 2 PH 3; 1 cross recess of each size: PH 1, PH 2; PZ 1, PZ 2, PZ 3; 1 TORX® with hole of each size 1 T 10, T 15, T 20, T 25, T 30; 1 hexagon of each wrench size: 3, 4, 5, 6."

£51.87


Bits part no. 64960020

"Kraftform Kompakt® 61, 17-piece
Description of Bits:
Extra-hard - for gentle screwing in wood to prevent breakage.
Tough-hard - for hard screwing in metal and sheet metal to prevent breakage.
Torsion - load peaks in the torsion zone of the bit are cushioned for longer life of the bits.
BiTorsion® - The torsion zone of the BiTorsion® bit has a higher hardness of 20 % compared with the shank. It serves to cushion torque peaks.
Diamond-coated - for universal use, long life. Very small diamond particles adhere to the screw and ensure secure seating of the tool in the screw head.
Design: Wallet with 89 mm long bits. Hand holder with quick change chuck, 1 Torx® with bore hole of each size: T 10, T 15, T 20, T 25, T 30, 1Torq Set® of each size: #6, #8, #10, 1 Tri-Wing® of each size: #1, #2, #3, 1 spanner of each size #4, #6, #8, #10."

£54.68


Bits part no. 64960025

"Kraftform Kompakt® 62, 33-piece
Description of Bits:
Extra-hard - for gentle screwing in wood to prevent breakage.
Tough-hard - for hard screwing in metal and sheet metal to prevent breakage.
Torsion - load peaks in the torsion zone of the bit are cushioned for longer life of the bits.
BiTorsion® - The torsion zone of the BiTorsion® bit has a higher hardness of 20 % compared with the shank. It serves to cushion torque peaks.
Diamond-coated - for universal use, long life. Very small diamond particles adhere to the screw and ensure secure seating of the tool in the screw head.
Design: Wallet with 89 mm long bits. Hand holder with quick change chuck, 1slotted head 6.5 x 1.2 mm
1 cross recess of each size: PH 1, PH 2, PH 3
1 cross recess of each size: PZ 1, PZ 2, PH 3
1 TORX® with bore hole of each size: T 8, T 10, T 15, T 20, T 25, T 27, T 30, T 40
1 Hex-Plus® of each wrench size : 2, 2.5, 3, 4, 5, 6
1 Torq-Set® of each size: #6, #8, #10
1 Tri-Wing® of each size: #1, #2, #3, #4
1 spanner of each size: #4, #6, #8, #10"

£85.43


Bits part no. 64210005

"Bits for Slotted Screws 1/4"" DIN 3126 C6.3, extra-hard tip
Description of Design:

Extra-hard - for gentle screwing in wood to prevent breakage.

Tough-hard - for hard screwing in metal and sheet metal to prevent breakage.

Torsion - load peaks in the torsion zone of the bit are cushioned for longer life of the bits.

BiTorsion® - the torsion zone of the BiTorsion® bit has a higher hardness of 20 % compared with the shank. It serves to cushion torque peaks.

Diamond-coated - for universal use, long life. Very small diamond particles adhere to the screw and ensure secure seating of the tool in the screw head.
Design: Torsion-shaped.
Blade width: 4 mm
Blade thickness: 0.5 mm
Length: 25 mm
PU piece: 10"

£0.45


Bits part no. 64210010

"Bits for Slotted Screws 1/4"" DIN 3126 C6.3, extra-hard tip
Description of Design:

Extra-hard - for gentle screwing in wood to prevent breakage.

Tough-hard - for hard screwing in metal and sheet metal to prevent breakage.

Torsion - load peaks in the torsion zone of the bit are cushioned for longer life of the bits.

BiTorsion® - the torsion zone of the BiTorsion® bit has a higher hardness of 20 % compared with the shank. It serves to cushion torque peaks.

Diamond-coated - for universal use, long life. Very small diamond particles adhere to the screw and ensure secure seating of the tool in the screw head.
Design: Torsion-shaped.
Blade width: 5.5 mm
Blade thickness: 0.8 mm
Length: 25 mm
PU piece: 10"

£0.45


Bits part no. 64210015

"Bits for Slotted Screws 1/4"" DIN 3126 C6.3, extra-hard tip
Description of Design:

Extra-hard - for gentle screwing in wood to prevent breakage.

Tough-hard - for hard screwing in metal and sheet metal to prevent breakage.

Torsion - load peaks in the torsion zone of the bit are cushioned for longer life of the bits.

BiTorsion® - the torsion zone of the BiTorsion® bit has a higher hardness of 20 % compared with the shank. It serves to cushion torque peaks.

Diamond-coated - for universal use, long life. Very small diamond particles adhere to the screw and ensure secure seating of the tool in the screw head.
Design: Torsion-shaped.
Blade width: 5.5 mm
Blade thickness: 1 mm
Length: 25 mm
PU piece: 10"

£0.45


Bits part no. 64210020

"Bits for Slotted Screws 1/4"" DIN 3126 C6.3, extra-hard tip
Description of Design:

Extra-hard - for gentle screwing in wood to prevent breakage.

Tough-hard - for hard screwing in metal and sheet metal to prevent breakage.

Torsion - load peaks in the torsion zone of the bit are cushioned for longer life of the bits.

BiTorsion® - the torsion zone of the BiTorsion® bit has a higher hardness of 20 % compared with the shank. It serves to cushion torque peaks.

Diamond-coated - for universal use, long life. Very small diamond particles adhere to the screw and ensure secure seating of the tool in the screw head.
Design: Torsion-shaped.
Blade width: 6.5 mm
Blade thickness: 1.2 mm
Length: 25 mm
PU piece: 10"

£0.45


Bits part no. 64230005

"Bits for Slotted Screws 1/4"" DIN 3126 C6.3, tough-hard tip
Description of Design:

Extra-hard - for gentle screwing in wood to prevent breakage.

Tough-hard - for hard screwing in metal and sheet metal to prevent breakage.

Torsion - load peaks in the torsion zone of the bit are cushioned for longer life of the bits.

BiTorsion® - the torsion zone of the BiTorsion® bit has a higher hardness of 20 % compared with the shank. It serves to cushion torque peaks.

Diamond-coated - for universal use, long life. Very small diamond particles adhere to the screw and ensure secure seating of the tool in the screw head.
Blade width: 3 mm
Blade thickness: 0.5 mm
Length: 39 mm
PU piece: 10"

£1.75


Bits part no. 64230010

"Bits for Slotted Screws 1/4"" DIN 3126 C6.3, tough-hard tip
Description of Design:

Extra-hard - for gentle screwing in wood to prevent breakage.

Tough-hard - for hard screwing in metal and sheet metal to prevent breakage.

Torsion - load peaks in the torsion zone of the bit are cushioned for longer life of the bits.

BiTorsion® - the torsion zone of the BiTorsion® bit has a higher hardness of 20 % compared with the shank. It serves to cushion torque peaks.

Diamond-coated - for universal use, long life. Very small diamond particles adhere to the screw and ensure secure seating of the tool in the screw head.
Blade width: 3.5 mm
Blade thickness: 0.6 mm
Length: 39 mm
PU piece: 10"

£1.75


Bits part no. 64230015

"Bits for Slotted Screws 1/4"" DIN 3126 C6.3, tough-hard tip
Description of Design:

Extra-hard - for gentle screwing in wood to prevent breakage.

Tough-hard - for hard screwing in metal and sheet metal to prevent breakage.

Torsion - load peaks in the torsion zone of the bit are cushioned for longer life of the bits.

BiTorsion® - the torsion zone of the BiTorsion® bit has a higher hardness of 20 % compared with the shank. It serves to cushion torque peaks.

Diamond-coated - for universal use, long life. Very small diamond particles adhere to the screw and ensure secure seating of the tool in the screw head.
Blade width: 4 mm
Blade thickness: 0.8 mm
Length: 39 mm
PU piece: 10"

£1.75


Bits part no. 64230020

"Bits for Slotted Screws 1/4"" DIN 3126 C6.3, tough-hard tip
Description of Design:

Extra-hard - for gentle screwing in wood to prevent breakage.

Tough-hard - for hard screwing in metal and sheet metal to prevent breakage.

Torsion - load peaks in the torsion zone of the bit are cushioned for longer life of the bits.

BiTorsion® - the torsion zone of the BiTorsion® bit has a higher hardness of 20 % compared with the shank. It serves to cushion torque peaks.

Diamond-coated - for universal use, long life. Very small diamond particles adhere to the screw and ensure secure seating of the tool in the screw head.
Blade width: 5.5 mm
Blade thickness: 1 mm
Length: 39 mm
PU piece: 10"

£1.75


Bits part no. 64230025

"Bits for Slotted Screws 1/4"" DIN 3126 C6.3, tough-hard tip
Description of Design:

Extra-hard - for gentle screwing in wood to prevent breakage.

Tough-hard - for hard screwing in metal and sheet metal to prevent breakage.

Torsion - load peaks in the torsion zone of the bit are cushioned for longer life of the bits.

BiTorsion® - the torsion zone of the BiTorsion® bit has a higher hardness of 20 % compared with the shank. It serves to cushion torque peaks.

Diamond-coated - for universal use, long life. Very small diamond particles adhere to the screw and ensure secure seating of the tool in the screw head.
Blade width: 6.5 mm
Blade thickness: 1.2 mm
Length: 39 mm
PU piece: 10"

£1.75


Bits part no. 64230030

"Bits for Slotted Screws 1/4"" DIN 3126 C6.3, tough-hard tip
Description of Design:

Extra-hard - for gentle screwing in wood to prevent breakage.

Tough-hard - for hard screwing in metal and sheet metal to prevent breakage.

Torsion - load peaks in the torsion zone of the bit are cushioned for longer life of the bits.

BiTorsion® - the torsion zone of the BiTorsion® bit has a higher hardness of 20 % compared with the shank. It serves to cushion torque peaks.

Diamond-coated - for universal use, long life. Very small diamond particles adhere to the screw and ensure secure seating of the tool in the screw head.
Blade width: 8 mm
Blade thickness: 1.2 mm
Length: 39 mm
PU piece: 10"

£1.75


Bits part no. 64230035

"Bits for Slotted Screws 1/4"" DIN 3126 C6.3, tough-hard tip
Description of Design:

Extra-hard - for gentle screwing in wood to prevent breakage.

Tough-hard - for hard screwing in metal and sheet metal to prevent breakage.

Torsion - load peaks in the torsion zone of the bit are cushioned for longer life of the bits.

BiTorsion® - the torsion zone of the BiTorsion® bit has a higher hardness of 20 % compared with the shank. It serves to cushion torque peaks.

Diamond-coated - for universal use, long life. Very small diamond particles adhere to the screw and ensure secure seating of the tool in the screw head.
Blade width: 8 mm
Blade thickness: 1.6 mm
Length: 39 mm
PU piece: 10"

£1.75


Bits part no. 64240005

"Bit for Cross Recess Screws (Phillips), 1/4"" DIN 3126 C6.3, tough-hard tip
Description of Design:

Extra-hard - for gentle screwing in wood to prevent breakage.

Tough-hard - for hard screwing in metal and sheet metal to prevent breakage.

Torsion - load peaks in the torsion zone of the bit are cushioned for longer life of the bits.

BiTorsion® - the torsion zone of the BiTorsion® bit has a higher hardness of 20 % compared with the shank. It serves to cushion torque peaks.

Diamond-coated - for universal use, long life. Very small diamond particles adhere to the screw and ensure secure seating of the tool in the screw head.
Dimensions: PH 1
Length: 25 mm
PU piece: 10"

£0.31


Bits part no. 64240010

"Bit for Cross Recess Screws (Phillips), 1/4"" DIN 3126 C6.3, tough-hard tip
Description of Design:

Extra-hard - for gentle screwing in wood to prevent breakage.

Tough-hard - for hard screwing in metal and sheet metal to prevent breakage.

Torsion - load peaks in the torsion zone of the bit are cushioned for longer life of the bits.

BiTorsion® - the torsion zone of the BiTorsion® bit has a higher hardness of 20 % compared with the shank. It serves to cushion torque peaks.

Diamond-coated - for universal use, long life. Very small diamond particles adhere to the screw and ensure secure seating of the tool in the screw head.
Dimensions: PH 2
Length: 25 mm
PU piece: 10"

£0.31


Bits part no. 64240015

"Bit for Cross Recess Screws (Phillips), 1/4"" DIN 3126 C6.3, tough-hard tip
Description of Design:

Extra-hard - for gentle screwing in wood to prevent breakage.

Tough-hard - for hard screwing in metal and sheet metal to prevent breakage.

Torsion - load peaks in the torsion zone of the bit are cushioned for longer life of the bits.

BiTorsion® - the torsion zone of the BiTorsion® bit has a higher hardness of 20 % compared with the shank. It serves to cushion torque peaks.

Diamond-coated - for universal use, long life. Very small diamond particles adhere to the screw and ensure secure seating of the tool in the screw head.
Dimensions: PH 3
Length: 25 mm
PU piece: 10"

£0.31


Bits part no. 64250005

"Bits for Cross Recess Screws (Phillips) 1/4"" DIN 3126 C6.3, tough-hard tip
Description of Design:

Extra-hard - for gentle screwing in wood to prevent breakage.

Tough-hard - for hard screwing in metal and sheet metal to prevent breakage.

Torsion - load peaks in the torsion zone of the bit are cushioned for longer life of the bits.

BiTorsion® - the torsion zone of the BiTorsion® bit has a higher hardness of 20 % compared with the shank. It serves to cushion torque peaks.

Diamond-coated - for universal use, long life. Very small diamond particles adhere to the screw and ensure secure seating of the tool in the screw head.
Design: Torsion-shaped.
Dimensions: PH 1
Length: 25 mm
PU piece: 10"

£0.40


Bits part no. 64250010

"Bits for Cross Recess Screws (Phillips) 1/4"" DIN 3126 C6.3, tough-hard tip
Description of Design:

Extra-hard - for gentle screwing in wood to prevent breakage.

Tough-hard - for hard screwing in metal and sheet metal to prevent breakage.

Torsion - load peaks in the torsion zone of the bit are cushioned for longer life of the bits.

BiTorsion® - the torsion zone of the BiTorsion® bit has a higher hardness of 20 % compared with the shank. It serves to cushion torque peaks.

Diamond-coated - for universal use, long life. Very small diamond particles adhere to the screw and ensure secure seating of the tool in the screw head.
Design: Torsion-shaped.
Dimensions: PH 2
Length: 25 mm
PU piece: 10"

£0.40


Bits part no. 64250015

"Bits for Cross Recess Screws (Phillips) 1/4"" DIN 3126 C6.3, tough-hard tip
Description of Design:

Extra-hard - for gentle screwing in wood to prevent breakage.

Tough-hard - for hard screwing in metal and sheet metal to prevent breakage.

Torsion - load peaks in the torsion zone of the bit are cushioned for longer life of the bits.

BiTorsion® - the torsion zone of the BiTorsion® bit has a higher hardness of 20 % compared with the shank. It serves to cushion torque peaks.

Diamond-coated - for universal use, long life. Very small diamond particles adhere to the screw and ensure secure seating of the tool in the screw head.
Design: Torsion-shaped.
Dimensions: PH 3
Length: 25 mm
PU piece: 10"

£0.40


Bits part no. 64260005

"Bits for Cross Recess Screws Pozidriv 1/4"" DIN 3126 C6.3, tough-hard
Description of Design:

Extra-hard - for gentle screwing in wood to prevent breakage.

Tough-hard - for hard screwing in metal and sheet metal to prevent breakage.

Torsion - load peaks in the torsion zone of the bit are cushioned for longer life of the bits.

BiTorsion® - the torsion zone of the BiTorsion® bit has a higher hardness of 20 % compared with the shank. It serves to cushion torque peaks.

Diamond-coated - for universal use, long life. Very small diamond particles adhere to the screw and ensure secure seating of the tool in the screw head.
Dimensions: PZ 1
Length: 25 mm
PU piece: 10"

£0.31


Bits part no. 64260010

"Bits for Cross Recess Screws Pozidriv 1/4"" DIN 3126 C6.3, tough-hard
Description of Design:

Extra-hard - for gentle screwing in wood to prevent breakage.

Tough-hard - for hard screwing in metal and sheet metal to prevent breakage.

Torsion - load peaks in the torsion zone of the bit are cushioned for longer life of the bits.

BiTorsion® - the torsion zone of the BiTorsion® bit has a higher hardness of 20 % compared with the shank. It serves to cushion torque peaks.

Diamond-coated - for universal use, long life. Very small diamond particles adhere to the screw and ensure secure seating of the tool in the screw head.
Dimensions: PZ 2
Length: 25 mm
PU piece: 10"

£0.31


Bits part no. 64260015

"Bits for Cross Recess Screws Pozidriv 1/4"" DIN 3126 C6.3, tough-hard
Description of Design:

Extra-hard - for gentle screwing in wood to prevent breakage.

Tough-hard - for hard screwing in metal and sheet metal to prevent breakage.

Torsion - load peaks in the torsion zone of the bit are cushioned for longer life of the bits.

BiTorsion® - the torsion zone of the BiTorsion® bit has a higher hardness of 20 % compared with the shank. It serves to cushion torque peaks.

Diamond-coated - for universal use, long life. Very small diamond particles adhere to the screw and ensure secure seating of the tool in the screw head.
Dimensions: PZ 3
Length: 25 mm
PU piece: 10"

£0.31


Bits part no. 64270005

"Bits for Cross Recess Screws Phillips 1/4"" DIN 3126 C6.3, extra-hard tip
Description of Design:

Extra-hard - for gentle screwing in wood to prevent breakage.

Tough-hard - for hard screwing in metal and sheet metal to prevent breakage.

Torsion - load peaks in the torsion zone of the bit are cushioned for longer life of the bits.

BiTorsion® - the torsion zone of the BiTorsion® bit has a higher hardness of 20 % compared with the shank. It serves to cushion torque peaks.

Diamond-coated - for universal use, long life. Very small diamond particles adhere to the screw and ensure secure seating of the tool in the screw head.
Design: Torsion-shaped.
Dimensions: PZ1
Length: 25 mm
PU piece: 10"

£0.40


Bits part no. 64270010

"Bits for Cross Recess Screws Phillips 1/4"" DIN 3126 C6.3, extra-hard tip
Description of Design:

Extra-hard - for gentle screwing in wood to prevent breakage.

Tough-hard - for hard screwing in metal and sheet metal to prevent breakage.

Torsion - load peaks in the torsion zone of the bit are cushioned for longer life of the bits.

BiTorsion® - the torsion zone of the BiTorsion® bit has a higher hardness of 20 % compared with the shank. It serves to cushion torque peaks.

Diamond-coated - for universal use, long life. Very small diamond particles adhere to the screw and ensure secure seating of the tool in the screw head.
Design: Torsion-shaped.
Dimensions: PZ2
Length: 25 mm
PU piece: 10"

£0.40


Bits part no. 64270015

"Bits for Cross Recess Screws Phillips 1/4"" DIN 3126 C6.3, extra-hard tip
Description of Design:

Extra-hard - for gentle screwing in wood to prevent breakage.

Tough-hard - for hard screwing in metal and sheet metal to prevent breakage.

Torsion - load peaks in the torsion zone of the bit are cushioned for longer life of the bits.

BiTorsion® - the torsion zone of the BiTorsion® bit has a higher hardness of 20 % compared with the shank. It serves to cushion torque peaks.

Diamond-coated - for universal use, long life. Very small diamond particles adhere to the screw and ensure secure seating of the tool in the screw head.
Design: Torsion-shaped.
Dimensions: PZ3
Length: 25 mm
PU piece: 10"

£0.40


Bits part no. 64290005

"Bits for Hexagon Socket Screws 1/4"" DIN 3126 C 6.3
Description of Design:

Extra-hard - for gentle screwing in wood to prevent breakage.

Tough-hard - for hard screwing in metal and sheet metal to prevent breakage.

Torsion - load peaks in the torsion zone of the bit are cushioned for longer life of the bits.

BiTorsion® - the torsion zone of the BiTorsion® bit has a higher hardness of 20 % compared with the shank. It serves to cushion torque peaks.

Diamond-coated - for universal use, long life. Very small diamond particles adhere to the screw and ensure secure seating of the tool in the screw head.
Design: The Hex-Plus geometry permits a higher static torque of max. 35 %, Hex-Plus®, tough-hard tip.
Key width: 2 mm
Length: 25 mm
PU piece: 10"

£1.20


Bits part no. 64290010

"Bits for Hexagon Socket Screws 1/4"" DIN 3126 C 6.3
Description of Design:

Extra-hard - for gentle screwing in wood to prevent breakage.

Tough-hard - for hard screwing in metal and sheet metal to prevent breakage.

Torsion - load peaks in the torsion zone of the bit are cushioned for longer life of the bits.

BiTorsion® - the torsion zone of the BiTorsion® bit has a higher hardness of 20 % compared with the shank. It serves to cushion torque peaks.

Diamond-coated - for universal use, long life. Very small diamond particles adhere to the screw and ensure secure seating of the tool in the screw head.
Design: The Hex-Plus geometry permits a higher static torque of max. 35 %, Hex-Plus®, tough-hard tip.
Key width: 2.5 mm
Length: 25 mm
PU piece: 10"

£1.20


Bits part no. 64290015

"Bits for Hexagon Socket Screws 1/4"" DIN 3126 C 6.3
Description of Design:

Extra-hard - for gentle screwing in wood to prevent breakage.

Tough-hard - for hard screwing in metal and sheet metal to prevent breakage.

Torsion - load peaks in the torsion zone of the bit are cushioned for longer life of the bits.

BiTorsion® - the torsion zone of the BiTorsion® bit has a higher hardness of 20 % compared with the shank. It serves to cushion torque peaks.

Diamond-coated - for universal use, long life. Very small diamond particles adhere to the screw and ensure secure seating of the tool in the screw head.
Design: The Hex-Plus geometry permits a higher static torque of max. 35 %, Hex-Plus®, tough-hard tip.
Key width: 3 mm
Length: 25 mm
PU piece: 10"

£1.20


Bits part no. 64290020

"Bits for Hexagon Socket Screws 1/4"" DIN 3126 C 6.3
Description of Design:

Extra-hard - for gentle screwing in wood to prevent breakage.

Tough-hard - for hard screwing in metal and sheet metal to prevent breakage.

Torsion - load peaks in the torsion zone of the bit are cushioned for longer life of the bits.

BiTorsion® - the torsion zone of the BiTorsion® bit has a higher hardness of 20 % compared with the shank. It serves to cushion torque peaks.

Diamond-coated - for universal use, long life. Very small diamond particles adhere to the screw and ensure secure seating of the tool in the screw head.
Design: The Hex-Plus geometry permits a higher static torque of max. 35 %, Hex-Plus®, tough-hard tip.
Key width: 4 mm
Length: 25 mm
PU piece: 10"

£1.20


Bits part no. 64290025

"Bits for Hexagon Socket Screws 1/4"" DIN 3126 C 6.3
Description of Design:

Extra-hard - for gentle screwing in wood to prevent breakage.

Tough-hard - for hard screwing in metal and sheet metal to prevent breakage.

Torsion - load peaks in the torsion zone of the bit are cushioned for longer life of the bits.

BiTorsion® - the torsion zone of the BiTorsion® bit has a higher hardness of 20 % compared with the shank. It serves to cushion torque peaks.

Diamond-coated - for universal use, long life. Very small diamond particles adhere to the screw and ensure secure seating of the tool in the screw head.
Design: The Hex-Plus geometry permits a higher static torque of max. 35 %, Hex-Plus®, tough-hard tip.
Key width: 5 mm
Length: 25 mm
PU piece: 10"

£1.20


Bits part no. 64290030

"Bits for Hexagon Socket Screws 1/4"" DIN 3126 C 6.3
Description of Design:

Extra-hard - for gentle screwing in wood to prevent breakage.

Tough-hard - for hard screwing in metal and sheet metal to prevent breakage.

Torsion - load peaks in the torsion zone of the bit are cushioned for longer life of the bits.

BiTorsion® - the torsion zone of the BiTorsion® bit has a higher hardness of 20 % compared with the shank. It serves to cushion torque peaks.

Diamond-coated - for universal use, long life. Very small diamond particles adhere to the screw and ensure secure seating of the tool in the screw head.
Design: The Hex-Plus geometry permits a higher static torque of max. 35 %, Hex-Plus®, tough-hard tip.
Key width: 6 mm
Length: 25 mm
PU piece: 10"

£1.20


Bits part no. 64290035

"Bits for Hexagon Socket Screws 1/4"" DIN 3126 C 6.3
Description of Design:

Extra-hard - for gentle screwing in wood to prevent breakage.

Tough-hard - for hard screwing in metal and sheet metal to prevent breakage.

Torsion - load peaks in the torsion zone of the bit are cushioned for longer life of the bits.

BiTorsion® - the torsion zone of the BiTorsion® bit has a higher hardness of 20 % compared with the shank. It serves to cushion torque peaks.

Diamond-coated - for universal use, long life. Very small diamond particles adhere to the screw and ensure secure seating of the tool in the screw head.
Design: The Hex-Plus geometry permits a higher static torque of max. 35 %, Hex-Plus®, tough-hard tip.
Key width: 8 mm
Length: 25 mm
PU piece: 10"

£1.68


Bits part no. 64300010

"INOX Bits for Slotted Screws 1/4"" DIN 3126 C 6.3 Stainless
Description of Design:

Extra-hard - for gentle screwing in wood to prevent breakage.

Tough-hard - for hard screwing in metal and sheet metal to prevent breakage.

Torsion - load peaks in the torsion zone of the bit are cushioned for longer life of the bits.

BiTorsion® - the torsion zone of the BiTorsion® bit has a higher hardness of 20 % compared with the shank. It serves to cushion torque peaks.

Diamond-coated - for universal use, long life. Very small diamond particles adhere to the screw and ensure secure seating of the tool in the screw head.
Design: Made of stainless steel. Thanks to the vacuum ice-hardening the tip features the same hardness as conventional tools and is therefore workshop-compatible and wear-resistant.

Application: Bits from stainless steel are used where extraneous rust at stainless steel is to be avoided. Especially for screwing stainless steel screws in window and door construction, in case of fittings and sinks, facades, handrails, balconies, fences etc.

Note: Extraneous rust in stainless steel processing is caused by tools made of normal steel. Abraded particles are thereby produced which adhere to the stainless steel. These particles become rust under the effect of oxygen. Use stainless steel tools only for stainless steel screws and store them separately! Extraneous rust is thereby avoided.
Stainless Rapidaptor® see (part no. 6428 0010).

Description of Design:
Extra-hard - for gentle screwing in wood to prevent breakage.
Tough-hard - for hard screwing in metal and sheet metal to prevent breakage.
Torsion - load peaks in the torsion zone of the bit are cushioned for longer life of the bits.
BiTorsion® - the torsion zone of the BiTorsion® bit has a hardness reduced by 20 % compared with the shank. It serves to cushion torque peaks. Longer life of the bits.
Diamond-coated - for universal use, long life. Very small diamond particles adhere to the screw and ensure secure seating of the tool in the screw head.
Blade width: 5.5 mm
Blade thickness: 0.8 mm
Length: 25 mm
PU piece: 10"

£3.04


Bits part no. 64300015

"INOX Bits for Slotted Screws 1/4"" DIN 3126 C 6.3 Stainless
Description of Design:

Extra-hard - for gentle screwing in wood to prevent breakage.

Tough-hard - for hard screwing in metal and sheet metal to prevent breakage.

Torsion - load peaks in the torsion zone of the bit are cushioned for longer life of the bits.

BiTorsion® - the torsion zone of the BiTorsion® bit has a higher hardness of 20 % compared with the shank. It serves to cushion torque peaks.

Diamond-coated - for universal use, long life. Very small diamond particles adhere to the screw and ensure secure seating of the tool in the screw head.
Design: Made of stainless steel. Thanks to the vacuum ice-hardening the tip features the same hardness as conventional tools and is therefore workshop-compatible and wear-resistant.

Application: Bits from stainless steel are used where extraneous rust at stainless steel is to be avoided. Especially for screwing stainless steel screws in window and door construction, in case of fittings and sinks, facades, handrails, balconies, fences etc.

Note: Extraneous rust in stainless steel processing is caused by tools made of normal steel. Abraded particles are thereby produced which adhere to the stainless steel. These particles become rust under the effect of oxygen. Use stainless steel tools only for stainless steel screws and store them separately! Extraneous rust is thereby avoided.
Stainless Rapidaptor® see (part no. 6428 0010).

Description of Design:
Extra-hard - for gentle screwing in wood to prevent breakage.
Tough-hard - for hard screwing in metal and sheet metal to prevent breakage.
Torsion - load peaks in the torsion zone of the bit are cushioned for longer life of the bits.
BiTorsion® - the torsion zone of the BiTorsion® bit has a hardness reduced by 20 % compared with the shank. It serves to cushion torque peaks. Longer life of the bits.
Diamond-coated - for universal use, long life. Very small diamond particles adhere to the screw and ensure secure seating of the tool in the screw head.
Blade width: 5.5 mm
Blade thickness: 1 mm
Length: 25 mm
PU piece: 10"

£3.04


Bits part no. 64300020

"INOX Bits for Slotted Screws 1/4"" DIN 3126 C 6.3 Stainless
Description of Design:

Extra-hard - for gentle screwing in wood to prevent breakage.

Tough-hard - for hard screwing in metal and sheet metal to prevent breakage.

Torsion - load peaks in the torsion zone of the bit are cushioned for longer life of the bits.

BiTorsion® - the torsion zone of the BiTorsion® bit has a higher hardness of 20 % compared with the shank. It serves to cushion torque peaks.

Diamond-coated - for universal use, long life. Very small diamond particles adhere to the screw and ensure secure seating of the tool in the screw head.
Design: Made of stainless steel. Thanks to the vacuum ice-hardening the tip features the same hardness as conventional tools and is therefore workshop-compatible and wear-resistant.

Application: Bits from stainless steel are used where extraneous rust at stainless steel is to be avoided. Especially for screwing stainless steel screws in window and door construction, in case of fittings and sinks, facades, handrails, balconies, fences etc.

Note: Extraneous rust in stainless steel processing is caused by tools made of normal steel. Abraded particles are thereby produced which adhere to the stainless steel. These particles become rust under the effect of oxygen. Use stainless steel tools only for stainless steel screws and store them separately! Extraneous rust is thereby avoided.
Stainless Rapidaptor® see (part no. 6428 0010).

Description of Design:
Extra-hard - for gentle screwing in wood to prevent breakage.
Tough-hard - for hard screwing in metal and sheet metal to prevent breakage.
Torsion - load peaks in the torsion zone of the bit are cushioned for longer life of the bits.
BiTorsion® - the torsion zone of the BiTorsion® bit has a hardness reduced by 20 % compared with the shank. It serves to cushion torque peaks. Longer life of the bits.
Diamond-coated - for universal use, long life. Very small diamond particles adhere to the screw and ensure secure seating of the tool in the screw head.
Blade width: 6.5 mm
Blade thickness: 1.2 mm
Length: 25 mm
PU piece: 10"

£3.04


Bits part no. 64310001

"Bits for TORX® Screws 1/4"" DIN 3126 C 6.3, torsion-shaped
Description of Design:

Extra-hard - for gentle screwing in wood to prevent breakage.

Tough-hard - for hard screwing in metal and sheet metal to prevent breakage.

Torsion - load peaks in the torsion zone of the bit are cushioned for longer life of the bits.

BiTorsion® - the torsion zone of the BiTorsion® bit has a higher hardness of 20 % compared with the shank. It serves to cushion torque peaks.

Diamond-coated - for universal use, long life. Very small diamond particles adhere to the screw and ensure secure seating of the tool in the screw head.
Design: Tough-hard tip.
Dimensions: T 6
Length: 25 mm
PU piece: 10"

£0.43


Bits part no. 64310002

"Bits for TORX® Screws 1/4"" DIN 3126 C 6.3, torsion-shaped
Description of Design:

Extra-hard - for gentle screwing in wood to prevent breakage.

Tough-hard - for hard screwing in metal and sheet metal to prevent breakage.

Torsion - load peaks in the torsion zone of the bit are cushioned for longer life of the bits.

BiTorsion® - the torsion zone of the BiTorsion® bit has a higher hardness of 20 % compared with the shank. It serves to cushion torque peaks.

Diamond-coated - for universal use, long life. Very small diamond particles adhere to the screw and ensure secure seating of the tool in the screw head.
Design: Tough-hard tip.
Dimensions: T 7
Length: 25 mm
PU piece: 10"

£0.43


Bits part no. 64310003

"Bits for TORX® Screws 1/4"" DIN 3126 C 6.3, torsion-shaped
Description of Design:

Extra-hard - for gentle screwing in wood to prevent breakage.

Tough-hard - for hard screwing in metal and sheet metal to prevent breakage.

Torsion - load peaks in the torsion zone of the bit are cushioned for longer life of the bits.

BiTorsion® - the torsion zone of the BiTorsion® bit has a higher hardness of 20 % compared with the shank. It serves to cushion torque peaks.

Diamond-coated - for universal use, long life. Very small diamond particles adhere to the screw and ensure secure seating of the tool in the screw head.
Design: Tough-hard tip.
Dimensions: T 8
Length: 25 mm
PU piece: 10"

£0.43


Bits part no. 64310004

"Bits for TORX® Screws 1/4"" DIN 3126 C 6.3, torsion-shaped
Description of Design:

Extra-hard - for gentle screwing in wood to prevent breakage.

Tough-hard - for hard screwing in metal and sheet metal to prevent breakage.

Torsion - load peaks in the torsion zone of the bit are cushioned for longer life of the bits.

BiTorsion® - the torsion zone of the BiTorsion® bit has a higher hardness of 20 % compared with the shank. It serves to cushion torque peaks.

Diamond-coated - for universal use, long life. Very small diamond particles adhere to the screw and ensure secure seating of the tool in the screw head.
Design: Tough-hard tip.
Dimensions: T 9
Length: 25 mm
PU piece: 10"

£0.43


Bits part no. 64320005

"INOX Bits for Cross Recess Screws Phillips 1/4"" DIN 3126 C 6.3 Stainless
Description of Design:

Extra-hard - for gentle screwing in wood to prevent breakage.

Tough-hard - for hard screwing in metal and sheet metal to prevent breakage.

Torsion - load peaks in the torsion zone of the bit are cushioned for longer life of the bits.

BiTorsion® - the torsion zone of the BiTorsion® bit has a higher hardness of 20 % compared with the shank. It serves to cushion torque peaks.

Diamond-coated - for universal use, long life. Very small diamond particles adhere to the screw and ensure secure seating of the tool in the screw head.
Design: Made of stainless steel. Thanks to the vacuum ice-hardening the tip features the same hardness as conventional tools and is therefore workshop-compatible and wear-resistant.

Application: Bits from stainless steel are used where extraneous rust at stainless steel is to be avoided. Especially for screwing stainless steel screws in window and door construction, in case of fittings and sinks, facades, handrails, balconies, fences etc.

Note: Extraneous rust in stainless steel processing is caused by tools made of normal steel. Abraded particles are thereby produced which adhere to the stainless steel. These particles become rust under the effect of oxygen. Use stainless steel tools only for stainless steel screws and store them separately! Extraneous rust is thereby avoided.
Stainless Rapidaptor® see (part no. 6428 0010).

Description of Design:
Extra-hard - for gentle screwing in wood to prevent breakage.
Tough-hard - for hard screwing in metal and sheet metal to prevent breakage.
Torsion - load peaks in the torsion zone of the bit are cushioned for longer life of the bits.
BiTorsion® - the torsion zone of the BiTorsion® bit has a hardness reduced by 20 % compared with the shank. It serves to cushion torque peaks. Longer life of the bits.
Diamond-coated - for universal use, long life. Very small diamond particles adhere to the screw and ensure secure seating of the tool in the screw head.
Dimensions: PH 1
Length: 25 mm
PU piece: 10"

£2.06


Bits part no. 64320010

"INOX Bits for Cross Recess Screws Phillips 1/4"" DIN 3126 C 6.3 Stainless
Description of Design:

Extra-hard - for gentle screwing in wood to prevent breakage.

Tough-hard - for hard screwing in metal and sheet metal to prevent breakage.

Torsion - load peaks in the torsion zone of the bit are cushioned for longer life of the bits.

BiTorsion® - the torsion zone of the BiTorsion® bit has a higher hardness of 20 % compared with the shank. It serves to cushion torque peaks.

Diamond-coated - for universal use, long life. Very small diamond particles adhere to the screw and ensure secure seating of the tool in the screw head.
Design: Made of stainless steel. Thanks to the vacuum ice-hardening the tip features the same hardness as conventional tools and is therefore workshop-compatible and wear-resistant.

Application: Bits from stainless steel are used where extraneous rust at stainless steel is to be avoided. Especially for screwing stainless steel screws in window and door construction, in case of fittings and sinks, facades, handrails, balconies, fences etc.

Note: Extraneous rust in stainless steel processing is caused by tools made of normal steel. Abraded particles are thereby produced which adhere to the stainless steel. These particles become rust under the effect of oxygen. Use stainless steel tools only for stainless steel screws and store them separately! Extraneous rust is thereby avoided.
Stainless Rapidaptor® see (part no. 6428 0010).

Description of Design:
Extra-hard - for gentle screwing in wood to prevent breakage.
Tough-hard - for hard screwing in metal and sheet metal to prevent breakage.
Torsion - load peaks in the torsion zone of the bit are cushioned for longer life of the bits.
BiTorsion® - the torsion zone of the BiTorsion® bit has a hardness reduced by 20 % compared with the shank. It serves to cushion torque peaks. Longer life of the bits.
Diamond-coated - for universal use, long life. Very small diamond particles adhere to the screw and ensure secure seating of the tool in the screw head.
Dimensions: PH 2
Length: 25 mm
PU piece: 10"

£2.06


Bits part no. 64320015

"INOX Bits for Cross Recess Screws Phillips 1/4"" DIN 3126 C 6.3 Stainless
Description of Design:

Extra-hard - for gentle screwing in wood to prevent breakage.

Tough-hard - for hard screwing in metal and sheet metal to prevent breakage.

Torsion - load peaks in the torsion zone of the bit are cushioned for longer life of the bits.

BiTorsion® - the torsion zone of the BiTorsion® bit has a higher hardness of 20 % compared with the shank. It serves to cushion torque peaks.

Diamond-coated - for universal use, long life. Very small diamond particles adhere to the screw and ensure secure seating of the tool in the screw head.
Design: Made of stainless steel. Thanks to the vacuum ice-hardening the tip features the same hardness as conventional tools and is therefore workshop-compatible and wear-resistant.

Application: Bits from stainless steel are used where extraneous rust at stainless steel is to be avoided. Especially for screwing stainless steel screws in window and door construction, in case of fittings and sinks, facades, handrails, balconies, fences etc.

Note: Extraneous rust in stainless steel processing is caused by tools made of normal steel. Abraded particles are thereby produced which adhere to the stainless steel. These particles become rust under the effect of oxygen. Use stainless steel tools only for stainless steel screws and store them separately! Extraneous rust is thereby avoided.
Stainless Rapidaptor® see (part no. 6428 0010).

Description of Design:
Extra-hard - for gentle screwing in wood to prevent breakage.
Tough-hard - for hard screwing in metal and sheet metal to prevent breakage.
Torsion - load peaks in the torsion zone of the bit are cushioned for longer life of the bits.
BiTorsion® - the torsion zone of the BiTorsion® bit has a hardness reduced by 20 % compared with the shank. It serves to cushion torque peaks. Longer life of the bits.
Diamond-coated - for universal use, long life. Very small diamond particles adhere to the screw and ensure secure seating of the tool in the screw head.
Dimensions: PH 3
Length: 25 mm
PU piece: 10"

£2.06


Bits part no. 64330005

"Bits for TORX® Screws 1/4"" DIN 3126 C 6.3, Standard
Description of Design:

Extra-hard - for gentle screwing in wood to prevent breakage.

Tough-hard - for hard screwing in metal and sheet metal to prevent breakage.

Torsion - load peaks in the torsion zone of the bit are cushioned for longer life of the bits.

BiTorsion® - the torsion zone of the BiTorsion® bit has a higher hardness of 20 % compared with the shank. It serves to cushion torque peaks.

Diamond-coated - for universal use, long life. Very small diamond particles adhere to the screw and ensure secure seating of the tool in the screw head.
Design: Tough-hard tip.
Sort: 5
Length: 25 mm
PU piece: 10"

£0.43


Bits part no. 64330010

"Bits for TORX® Screws 1/4"" DIN 3126 C 6.3, Standard
Description of Design:

Extra-hard - for gentle screwing in wood to prevent breakage.

Tough-hard - for hard screwing in metal and sheet metal to prevent breakage.

Torsion - load peaks in the torsion zone of the bit are cushioned for longer life of the bits.

BiTorsion® - the torsion zone of the BiTorsion® bit has a higher hardness of 20 % compared with the shank. It serves to cushion torque peaks.

Diamond-coated - for universal use, long life. Very small diamond particles adhere to the screw and ensure secure seating of the tool in the screw head.
Design: Tough-hard tip.
Sort: 6
Length: 25 mm
PU piece: 10"

£0.43


Bits part no. 64330015

"Bits for TORX® Screws 1/4"" DIN 3126 C 6.3, Standard
Description of Design:

Extra-hard - for gentle screwing in wood to prevent breakage.

Tough-hard - for hard screwing in metal and sheet metal to prevent breakage.

Torsion - load peaks in the torsion zone of the bit are cushioned for longer life of the bits.

BiTorsion® - the torsion zone of the BiTorsion® bit has a higher hardness of 20 % compared with the shank. It serves to cushion torque peaks.

Diamond-coated - for universal use, long life. Very small diamond particles adhere to the screw and ensure secure seating of the tool in the screw head.
Design: Tough-hard tip.
Sort: 7
Length: 25 mm
PU piece: 10"

£0.43


Bits part no. 64330020

"Bits for TORX® Screws 1/4"" DIN 3126 C 6.3, Standard
Description of Design:

Extra-hard - for gentle screwing in wood to prevent breakage.

Tough-hard - for hard screwing in metal and sheet metal to prevent breakage.

Torsion - load peaks in the torsion zone of the bit are cushioned for longer life of the bits.

BiTorsion® - the torsion zone of the BiTorsion® bit has a higher hardness of 20 % compared with the shank. It serves to cushion torque peaks.

Diamond-coated - for universal use, long life. Very small diamond particles adhere to the screw and ensure secure seating of the tool in the screw head.
Design: Tough-hard tip.
Sort: 8
Length: 25 mm
PU piece: 10"

£0.43


Bits part no. 64330025

"Bits for TORX® Screws 1/4"" DIN 3126 C 6.3, Standard
Description of Design:

Extra-hard - for gentle screwing in wood to prevent breakage.

Tough-hard - for hard screwing in metal and sheet metal to prevent breakage.

Torsion - load peaks in the torsion zone of the bit are cushioned for longer life of the bits.

BiTorsion® - the torsion zone of the BiTorsion® bit has a higher hardness of 20 % compared with the shank. It serves to cushion torque peaks.

Diamond-coated - for universal use, long life. Very small diamond particles adhere to the screw and ensure secure seating of the tool in the screw head.
Design: Tough-hard tip.
Sort: 9
Length: 25 mm
PU piece: 10"

£0.43


Bits part no. 64330030

"Bits for TORX® Screws 1/4"" DIN 3126 C 6.3, Standard
Description of Design:

Extra-hard - for gentle screwing in wood to prevent breakage.

Tough-hard - for hard screwing in metal and sheet metal to prevent breakage.

Torsion - load peaks in the torsion zone of the bit are cushioned for longer life of the bits.

BiTorsion® - the torsion zone of the BiTorsion® bit has a higher hardness of 20 % compared with the shank. It serves to cushion torque peaks.

Diamond-coated - for universal use, long life. Very small diamond particles adhere to the screw and ensure secure seating of the tool in the screw head.
Design: Tough-hard tip.
Sort: 10
Length: 25 mm
PU piece: 10"

£0.43


Bits part no. 64330035

"Bits for TORX® Screws 1/4"" DIN 3126 C 6.3, Standard
Description of Design:

Extra-hard - for gentle screwing in wood to prevent breakage.

Tough-hard - for hard screwing in metal and sheet metal to prevent breakage.

Torsion - load peaks in the torsion zone of the bit are cushioned for longer life of the bits.

BiTorsion® - the torsion zone of the BiTorsion® bit has a higher hardness of 20 % compared with the shank. It serves to cushion torque peaks.

Diamond-coated - for universal use, long life. Very small diamond particles adhere to the screw and ensure secure seating of the tool in the screw head.
Design: Tough-hard tip.
Sort: 11
Length: 25 mm
PU piece: 10"

£0.43


Bits part no. 64340005

"INOX Bits for Cross Recess Screws Pozidriv 1/4"" DIN 3126 C 6.3 Stainless
Description of Design:

Extra-hard - for gentle screwing in wood to prevent breakage.

Tough-hard - for hard screwing in metal and sheet metal to prevent breakage.

Torsion - load peaks in the torsion zone of the bit are cushioned for longer life of the bits.

BiTorsion® - the torsion zone of the BiTorsion® bit has a higher hardness of 20 % compared with the shank. It serves to cushion torque peaks.

Diamond-coated - for universal use, long life. Very small diamond particles adhere to the screw and ensure secure seating of the tool in the screw head.
Design: Made of stainless steel. Thanks to the vacuum ice-hardening the tip features the same hardness as conventional tools and is therefore workshop-compatible and wear-resistant.

Application: Bits from stainless steel are used where extraneous rust at stainless steel is to be avoided. Especially for screwing stainless steel screws in window and door construction, in case of fittings and sinks, facades, handrails, balconies, fences etc.

Note: Extraneous rust in stainless steel processing is caused by tools made of normal steel. Abraded particles are thereby produced which adhere to the stainless steel. These particles become rust under the effect of oxygen. Use stainless steel tools only for stainless steel screws and store them separately! Extraneous rust is thereby avoided.
Stainless Rapidaptor® see (part no. 6428 0010).

Description of Design:
Extra-hard - for gentle screwing in wood to prevent breakage.
Tough-hard - for hard screwing in metal and sheet metal to prevent breakage.
Torsion - load peaks in the torsion zone of the bit are cushioned for longer life of the bits.
BiTorsion® - the torsion zone of the BiTorsion® bit has a hardness reduced by 20 % compared with the shank. It serves to cushion torque peaks. Longer life of the bits.
Diamond-coated - for universal use, long life. Very small diamond particles adhere to the screw and ensure secure seating of the tool in the screw head.
Dimensions: PZ 1
Length: 25 mm
PU piece: 10"

£2.06


Bits part no. 64340010

"INOX Bits for Cross Recess Screws Pozidriv 1/4"" DIN 3126 C 6.3 Stainless
Description of Design:

Extra-hard - for gentle screwing in wood to prevent breakage.

Tough-hard - for hard screwing in metal and sheet metal to prevent breakage.

Torsion - load peaks in the torsion zone of the bit are cushioned for longer life of the bits.

BiTorsion® - the torsion zone of the BiTorsion® bit has a higher hardness of 20 % compared with the shank. It serves to cushion torque peaks.

Diamond-coated - for universal use, long life. Very small diamond particles adhere to the screw and ensure secure seating of the tool in the screw head.
Design: Made of stainless steel. Thanks to the vacuum ice-hardening the tip features the same hardness as conventional tools and is therefore workshop-compatible and wear-resistant.

Application: Bits from stainless steel are used where extraneous rust at stainless steel is to be avoided. Especially for screwing stainless steel screws in window and door construction, in case of fittings and sinks, facades, handrails, balconies, fences etc.

Note: Extraneous rust in stainless steel processing is caused by tools made of normal steel. Abraded particles are thereby produced which adhere to the stainless steel. These particles become rust under the effect of oxygen. Use stainless steel tools only for stainless steel screws and store them separately! Extraneous rust is thereby avoided.
Stainless Rapidaptor® see (part no. 6428 0010).

Description of Design:
Extra-hard - for gentle screwing in wood to prevent breakage.
Tough-hard - for hard screwing in metal and sheet metal to prevent breakage.
Torsion - load peaks in the torsion zone of the bit are cushioned for longer life of the bits.
BiTorsion® - the torsion zone of the BiTorsion® bit has a hardness reduced by 20 % compared with the shank. It serves to cushion torque peaks. Longer life of the bits.
Diamond-coated - for universal use, long life. Very small diamond particles adhere to the screw and ensure secure seating of the tool in the screw head.
Dimensions: PZ 2
Length: 25 mm
PU piece: 10"

£2.06


Bits part no. 64340015

"INOX Bits for Cross Recess Screws Pozidriv 1/4"" DIN 3126 C 6.3 Stainless
Description of Design:

Extra-hard - for gentle screwing in wood to prevent breakage.

Tough-hard - for hard screwing in metal and sheet metal to prevent breakage.

Torsion - load peaks in the torsion zone of the bit are cushioned for longer life of the bits.

BiTorsion® - the torsion zone of the BiTorsion® bit has a higher hardness of 20 % compared with the shank. It serves to cushion torque peaks.

Diamond-coated - for universal use, long life. Very small diamond particles adhere to the screw and ensure secure seating of the tool in the screw head.
Design: Made of stainless steel. Thanks to the vacuum ice-hardening the tip features the same hardness as conventional tools and is therefore workshop-compatible and wear-resistant.

Application: Bits from stainless steel are used where extraneous rust at stainless steel is to be avoided. Especially for screwing stainless steel screws in window and door construction, in case of fittings and sinks, facades, handrails, balconies, fences etc.

Note: Extraneous rust in stainless steel processing is caused by tools made of normal steel. Abraded particles are thereby produced which adhere to the stainless steel. These particles become rust under the effect of oxygen. Use stainless steel tools only for stainless steel screws and store them separately! Extraneous rust is thereby avoided.
Stainless Rapidaptor® see (part no. 6428 0010).

Description of Design:
Extra-hard - for gentle screwing in wood to prevent breakage.
Tough-hard - for hard screwing in metal and sheet metal to prevent breakage.
Torsion - load peaks in the torsion zone of the bit are cushioned for longer life of the bits.
BiTorsion® - the torsion zone of the BiTorsion® bit has a hardness reduced by 20 % compared with the shank. It serves to cushion torque peaks. Longer life of the bits.
Diamond-coated - for universal use, long life. Very small diamond particles adhere to the screw and ensure secure seating of the tool in the screw head.
Dimensions: PZ 3
Length: 25 mm
PU piece: 10"

£2.06


Bits part no. 64350002

"Bits for TORX® Screws 1/4"" DIN 3126 C 6.3, with hole
Description of Design:

Extra-hard - for gentle screwing in wood to prevent breakage.

Tough-hard - for hard screwing in metal and sheet metal to prevent breakage.

Torsion - load peaks in the torsion zone of the bit are cushioned for longer life of the bits.

BiTorsion® - the torsion zone of the BiTorsion® bit has a higher hardness of 20 % compared with the shank. It serves to cushion torque peaks.

Diamond-coated - for universal use, long life. Very small diamond particles adhere to the screw and ensure secure seating of the tool in the screw head.
Design: Tough-hard tip.
Dimensions: T 7
Length: 25 mm
PU piece: 10"

£1.20


Bits part no. 64350003

"Bits for TORX® Screws 1/4"" DIN 3126 C 6.3, with hole
Description of Design:

Extra-hard - for gentle screwing in wood to prevent breakage.

Tough-hard - for hard screwing in metal and sheet metal to prevent breakage.

Torsion - load peaks in the torsion zone of the bit are cushioned for longer life of the bits.

BiTorsion® - the torsion zone of the BiTorsion® bit has a higher hardness of 20 % compared with the shank. It serves to cushion torque peaks.

Diamond-coated - for universal use, long life. Very small diamond particles adhere to the screw and ensure secure seating of the tool in the screw head.
Design: Tough-hard tip.
Dimensions: T 8
Length: 25 mm
PU piece: 10"

£1.20


Bits part no. 64350004

"Bits for TORX® Screws 1/4"" DIN 3126 C 6.3, with hole
Description of Design:

Extra-hard - for gentle screwing in wood to prevent breakage.

Tough-hard - for hard screwing in metal and sheet metal to prevent breakage.

Torsion - load peaks in the torsion zone of the bit are cushioned for longer life of the bits.

BiTorsion® - the torsion zone of the BiTorsion® bit has a higher hardness of 20 % compared with the shank. It serves to cushion torque peaks.

Diamond-coated - for universal use, long life. Very small diamond particles adhere to the screw and ensure secure seating of the tool in the screw head.
Design: Tough-hard tip.
Dimensions: T 9
Length: 25 mm
PU piece: 10"

£1.20


Bits part no. 64350005

"Bits for TORX® Screws 1/4"" DIN 3126 C 6.3, with hole
Description of Design:

Extra-hard - for gentle screwing in wood to prevent breakage.

Tough-hard - for hard screwing in metal and sheet metal to prevent breakage.

Torsion - load peaks in the torsion zone of the bit are cushioned for longer life of the bits.

BiTorsion® - the torsion zone of the BiTorsion® bit has a higher hardness of 20 % compared with the shank. It serves to cushion torque peaks.

Diamond-coated - for universal use, long life. Very small diamond particles adhere to the screw and ensure secure seating of the tool in the screw head.
Design: Tough-hard tip.
Dimensions: T 10
Length: 25 mm
PU piece: 10"

£1.20


Bits part no. 64350010

"Bits for TORX® Screws 1/4"" DIN 3126 C 6.3, with hole
Description of Design:

Extra-hard - for gentle screwing in wood to prevent breakage.

Tough-hard - for hard screwing in metal and sheet metal to prevent breakage.

Torsion - load peaks in the torsion zone of the bit are cushioned for longer life of the bits.

BiTorsion® - the torsion zone of the BiTorsion® bit has a higher hardness of 20 % compared with the shank. It serves to cushion torque peaks.

Diamond-coated - for universal use, long life. Very small diamond particles adhere to the screw and ensure secure seating of the tool in the screw head.
Design: Tough-hard tip.
Dimensions: T 15
Length: 25 mm
PU piece: 10"

£1.20


Bits part no. 64350015

"Bits for TORX® Screws 1/4"" DIN 3126 C 6.3, with hole
Description of Design:

Extra-hard - for gentle screwing in wood to prevent breakage.

Tough-hard - for hard screwing in metal and sheet metal to prevent breakage.

Torsion - load peaks in the torsion zone of the bit are cushioned for longer life of the bits.

BiTorsion® - the torsion zone of the BiTorsion® bit has a higher hardness of 20 % compared with the shank. It serves to cushion torque peaks.

Diamond-coated - for universal use, long life. Very small diamond particles adhere to the screw and ensure secure seating of the tool in the screw head.
Design: Tough-hard tip.
Dimensions: T 20
Length: 25 mm
PU piece: 10"

£1.20


Bits part no. 64350020

"Bits for TORX® Screws 1/4"" DIN 3126 C 6.3, with hole
Description of Design:

Extra-hard - for gentle screwing in wood to prevent breakage.

Tough-hard - for hard screwing in metal and sheet metal to prevent breakage.

Torsion - load peaks in the torsion zone of the bit are cushioned for longer life of the bits.

BiTorsion® - the torsion zone of the BiTorsion® bit has a higher hardness of 20 % compared with the shank. It serves to cushion torque peaks.

Diamond-coated - for universal use, long life. Very small diamond particles adhere to the screw and ensure secure seating of the tool in the screw head.
Design: Tough-hard tip.
Dimensions: T 25
Length: 25 mm
PU piece: 10"

£1.20


Bits part no. 64350025

"Bits for TORX® Screws 1/4"" DIN 3126 C 6.3, with hole
Description of Design:

Extra-hard - for gentle screwing in wood to prevent breakage.

Tough-hard - for hard screwing in metal and sheet metal to prevent breakage.

Torsion - load peaks in the torsion zone of the bit are cushioned for longer life of the bits.

BiTorsion® - the torsion zone of the BiTorsion® bit has a higher hardness of 20 % compared with the shank. It serves to cushion torque peaks.

Diamond-coated - for universal use, long life. Very small diamond particles adhere to the screw and ensure secure seating of the tool in the screw head.
Design: Tough-hard tip.
Dimensions: T 27
Length: 25 mm
PU piece: 10"

£1.20


Bits part no. 64350030

"Bits for TORX® Screws 1/4"" DIN 3126 C 6.3, with hole
Description of Design:

Extra-hard - for gentle screwing in wood to prevent breakage.

Tough-hard - for hard screwing in metal and sheet metal to prevent breakage.

Torsion - load peaks in the torsion zone of the bit are cushioned for longer life of the bits.

BiTorsion® - the torsion zone of the BiTorsion® bit has a higher hardness of 20 % compared with the shank. It serves to cushion torque peaks.

Diamond-coated - for universal use, long life. Very small diamond particles adhere to the screw and ensure secure seating of the tool in the screw head.
Design: Tough-hard tip.
Dimensions: T 30
Length: 25 mm
PU piece: 10"

£1.20


Bits part no. 64350035

"Bits for TORX® Screws 1/4"" DIN 3126 C 6.3, with hole
Description of Design:

Extra-hard - for gentle screwing in wood to prevent breakage.

Tough-hard - for hard screwing in metal and sheet metal to prevent breakage.

Torsion - load peaks in the torsion zone of the bit are cushioned for longer life of the bits.

BiTorsion® - the torsion zone of the BiTorsion® bit has a higher hardness of 20 % compared with the shank. It serves to cushion torque peaks.

Diamond-coated - for universal use, long life. Very small diamond particles adhere to the screw and ensure secure seating of the tool in the screw head.
Design: Tough-hard tip.
Dimensions: T 40
Length: 25 mm
PU piece: 10"

£1.20


Bits part no. 64370005

"Bits for Cross Recess Screws (Phillips), 1/4"" DIN 3126 C6.3 tip, BiTorsion®
Description of Design:

Extra-hard - for gentle screwing in wood to prevent breakage.

Tough-hard - for hard screwing in metal and sheet metal to prevent breakage.

Torsion - load peaks in the torsion zone of the bit are cushioned for longer life of the bits.

BiTorsion® - the torsion zone of the BiTorsion® bit has a higher hardness of 20 % compared with the shank. It serves to cushion torque peaks.

Diamond-coated - for universal use, long life. Very small diamond particles adhere to the screw and ensure secure seating of the tool in the screw head.
Design: Diamond-coated tip, Hex-Plus drive.
Dimensions: PH 1
Length: 25 mm
PU piece: 10"

£2.06


Bits part no. 64370010

"Bits for Cross Recess Screws (Phillips), 1/4"" DIN 3126 C6.3 tip, BiTorsion®
Description of Design:

Extra-hard - for gentle screwing in wood to prevent breakage.

Tough-hard - for hard screwing in metal and sheet metal to prevent breakage.

Torsion - load peaks in the torsion zone of the bit are cushioned for longer life of the bits.

BiTorsion® - the torsion zone of the BiTorsion® bit has a higher hardness of 20 % compared with the shank. It serves to cushion torque peaks.

Diamond-coated - for universal use, long life. Very small diamond particles adhere to the screw and ensure secure seating of the tool in the screw head.
Design: Diamond-coated tip, Hex-Plus drive.
Dimensions: PH 2
Length: 25 mm
PU piece: 10"

£2.06


Bits part no. 64370015

"Bits for Cross Recess Screws (Phillips), 1/4"" DIN 3126 C6.3 tip, BiTorsion®
Description of Design:

Extra-hard - for gentle screwing in wood to prevent breakage.

Tough-hard - for hard screwing in metal and sheet metal to prevent breakage.

Torsion - load peaks in the torsion zone of the bit are cushioned for longer life of the bits.

BiTorsion® - the torsion zone of the BiTorsion® bit has a higher hardness of 20 % compared with the shank. It serves to cushion torque peaks.

Diamond-coated - for universal use, long life. Very small diamond particles adhere to the screw and ensure secure seating of the tool in the screw head.
Design: Diamond-coated tip, Hex-Plus drive.
Dimensions: PH 3
Length: 25 mm
PU piece: 10"

£2.06


Bits part no. 64380010

"Bits for Recess TORX PLUS® Screws 1/4"" DIN 3126 C 6.3
Description of Design:

Extra-hard - for gentle screwing in wood to prevent breakage.

Tough-hard - for hard screwing in metal and sheet metal to prevent breakage.

Torsion - load peaks in the torsion zone of the bit are cushioned for longer life of the bits.

BiTorsion® - the torsion zone of the BiTorsion® bit has a higher hardness of 20 % compared with the shank. It serves to cushion torque peaks.

Diamond-coated - for universal use, long life. Very small diamond particles adhere to the screw and ensure secure seating of the tool in the screw head.
Design: Tough-hard tip.
Size: 10 IP
Length: 25 mm
PU piece: 10"

£1.89


Bits part no. 64380015

"Bits for Recess TORX PLUS® Screws 1/4"" DIN 3126 C 6.3
Description of Design:

Extra-hard - for gentle screwing in wood to prevent breakage.

Tough-hard - for hard screwing in metal and sheet metal to prevent breakage.

Torsion - load peaks in the torsion zone of the bit are cushioned for longer life of the bits.

BiTorsion® - the torsion zone of the BiTorsion® bit has a higher hardness of 20 % compared with the shank. It serves to cushion torque peaks.

Diamond-coated - for universal use, long life. Very small diamond particles adhere to the screw and ensure secure seating of the tool in the screw head.
Design: Tough-hard tip.
Size: 15 IP
Length: 25 mm
PU piece: 10"

£1.89


Bits part no. 64380020

"Bits for Recess TORX PLUS® Screws 1/4"" DIN 3126 C 6.3
Description of Design:

Extra-hard - for gentle screwing in wood to prevent breakage.

Tough-hard - for hard screwing in metal and sheet metal to prevent breakage.

Torsion - load peaks in the torsion zone of the bit are cushioned for longer life of the bits.

BiTorsion® - the torsion zone of the BiTorsion® bit has a higher hardness of 20 % compared with the shank. It serves to cushion torque peaks.

Diamond-coated - for universal use, long life. Very small diamond particles adhere to the screw and ensure secure seating of the tool in the screw head.
Design: Tough-hard tip.
Size: 20 IP
Length: 25 mm
PU piece: 10"

£1.89


Bits part no. 64380025

"Bits for Recess TORX PLUS® Screws 1/4"" DIN 3126 C 6.3
Description of Design:

Extra-hard - for gentle screwing in wood to prevent breakage.

Tough-hard - for hard screwing in metal and sheet metal to prevent breakage.

Torsion - load peaks in the torsion zone of the bit are cushioned for longer life of the bits.

BiTorsion® - the torsion zone of the BiTorsion® bit has a higher hardness of 20 % compared with the shank. It serves to cushion torque peaks.

Diamond-coated - for universal use, long life. Very small diamond particles adhere to the screw and ensure secure seating of the tool in the screw head.
Design: Tough-hard tip.
Size: 25 IP
Length: 25 mm
PU piece: 10"

£1.89


Bits part no. 64380030

"Bits for Recess TORX PLUS® Screws 1/4"" DIN 3126 C 6.3
Description of Design:

Extra-hard - for gentle screwing in wood to prevent breakage.

Tough-hard - for hard screwing in metal and sheet metal to prevent breakage.

Torsion - load peaks in the torsion zone of the bit are cushioned for longer life of the bits.

BiTorsion® - the torsion zone of the BiTorsion® bit has a higher hardness of 20 % compared with the shank. It serves to cushion torque peaks.

Diamond-coated - for universal use, long life. Very small diamond particles adhere to the screw and ensure secure seating of the tool in the screw head.
Design: Tough-hard tip.
Size: 30 IP
Length: 25 mm
PU piece: 10"

£1.89


Bits part no. 64380040

"Bits for Recess TORX PLUS® Screws 1/4"" DIN 3126 C 6.3
Description of Design:

Extra-hard - for gentle screwing in wood to prevent breakage.

Tough-hard - for hard screwing in metal and sheet metal to prevent breakage.

Torsion - load peaks in the torsion zone of the bit are cushioned for longer life of the bits.

BiTorsion® - the torsion zone of the BiTorsion® bit has a higher hardness of 20 % compared with the shank. It serves to cushion torque peaks.

Diamond-coated - for universal use, long life. Very small diamond particles adhere to the screw and ensure secure seating of the tool in the screw head.
Design: Tough-hard tip.
Size: 40 IP
Length: 25 mm
PU piece: 10"

£1.89


Bits part no. 64390005

"Bits for Cross Recess Screws Pozidriv 1/4"" DIN 3126 C6.3, BiTorsion®
Description of Design:

Extra-hard - for gentle screwing in wood to prevent breakage.

Tough-hard - for hard screwing in metal and sheet metal to prevent breakage.

Torsion - load peaks in the torsion zone of the bit are cushioned for longer life of the bits.

BiTorsion® - the torsion zone of the BiTorsion® bit has a higher hardness of 20 % compared with the shank. It serves to cushion torque peaks.

Diamond-coated - for universal use, long life. Very small diamond particles adhere to the screw and ensure secure seating of the tool in the screw head.
Design: Diamond-coated tip, Hex-Plus drive.
Dimensions: PZ 1
Length: 25 mm
PU piece: 10"

£2.06


Bits part no. 64390010

"Bits for Cross Recess Screws Pozidriv 1/4"" DIN 3126 C6.3, BiTorsion®
Description of Design:

Extra-hard - for gentle screwing in wood to prevent breakage.

Tough-hard - for hard screwing in metal and sheet metal to prevent breakage.

Torsion - load peaks in the torsion zone of the bit are cushioned for longer life of the bits.

BiTorsion® - the torsion zone of the BiTorsion® bit has a higher hardness of 20 % compared with the shank. It serves to cushion torque peaks.

Diamond-coated - for universal use, long life. Very small diamond particles adhere to the screw and ensure secure seating of the tool in the screw head.
Design: Diamond-coated tip, Hex-Plus drive.
Dimensions: PZ 2
Length: 25 mm
PU piece: 10"

£2.06


Bits part no. 64390015

"Bits for Cross Recess Screws Pozidriv 1/4"" DIN 3126 C6.3, BiTorsion®
Description of Design:

Extra-hard - for gentle screwing in wood to prevent breakage.

Tough-hard - for hard screwing in metal and sheet metal to prevent breakage.

Torsion - load peaks in the torsion zone of the bit are cushioned for longer life of the bits.

BiTorsion® - the torsion zone of the BiTorsion® bit has a higher hardness of 20 % compared with the shank. It serves to cushion torque peaks.

Diamond-coated - for universal use, long life. Very small diamond particles adhere to the screw and ensure secure seating of the tool in the screw head.
Design: Diamond-coated tip, Hex-Plus drive.
Dimensions: PZ 3
Length: 25 mm
PU piece: 10"

£2.06


Bits part no. 64400010

"Bits for ASSY®, pias Screws 1/4"" DIN 3126-C 6.3
Description of Design:

Extra-hard - for gentle screwing in wood to prevent breakage.

Tough-hard - for hard screwing in metal and sheet metal to prevent breakage.

Torsion - load peaks in the torsion zone of the bit are cushioned for longer life of the bits.

BiTorsion® - the torsion zone of the BiTorsion® bit has a higher hardness of 20 % compared with the shank. It serves to cushion torque peaks.

Diamond-coated - for universal use, long life. Very small diamond particles adhere to the screw and ensure secure seating of the tool in the screw head.
Design: SIT tip, tough-hard.
Improved force transmission due to 6 contact faces.
Faster screwing and improved fit due to tapered geometry. Reduced ejection forces due to secure fit in the screw.
Size: SIT 10
Length: 25 mm
PU piece: 10"

£1.04


Bits part no. 64400020

"Bits for ASSY®, pias Screws 1/4"" DIN 3126-C 6.3
Description of Design:

Extra-hard - for gentle screwing in wood to prevent breakage.

Tough-hard - for hard screwing in metal and sheet metal to prevent breakage.

Torsion - load peaks in the torsion zone of the bit are cushioned for longer life of the bits.

BiTorsion® - the torsion zone of the BiTorsion® bit has a higher hardness of 20 % compared with the shank. It serves to cushion torque peaks.

Diamond-coated - for universal use, long life. Very small diamond particles adhere to the screw and ensure secure seating of the tool in the screw head.
Design: SIT tip, tough-hard.
Improved force transmission due to 6 contact faces.
Faster screwing and improved fit due to tapered geometry. Reduced ejection forces due to secure fit in the screw.
Size: SIT 20
Length: 25 mm
PU piece: 10"

£1.04


Bits part no. 64400025

"Bits for ASSY®, pias Screws 1/4"" DIN 3126-C 6.3
Description of Design:

Extra-hard - for gentle screwing in wood to prevent breakage.

Tough-hard - for hard screwing in metal and sheet metal to prevent breakage.

Torsion - load peaks in the torsion zone of the bit are cushioned for longer life of the bits.

BiTorsion® - the torsion zone of the BiTorsion® bit has a higher hardness of 20 % compared with the shank. It serves to cushion torque peaks.

Diamond-coated - for universal use, long life. Very small diamond particles adhere to the screw and ensure secure seating of the tool in the screw head.
Design: SIT tip, tough-hard.
Improved force transmission due to 6 contact faces.
Faster screwing and improved fit due to tapered geometry. Reduced ejection forces due to secure fit in the screw.
Size: SIT 25
Length: 25 mm
PU piece: 10"

£1.04


Bits part no. 64400030

"Bits for ASSY®, pias Screws 1/4"" DIN 3126-C 6.3
Description of Design:

Extra-hard - for gentle screwing in wood to prevent breakage.

Tough-hard - for hard screwing in metal and sheet metal to prevent breakage.

Torsion - load peaks in the torsion zone of the bit are cushioned for longer life of the bits.

BiTorsion® - the torsion zone of the BiTorsion® bit has a higher hardness of 20 % compared with the shank. It serves to cushion torque peaks.

Diamond-coated - for universal use, long life. Very small diamond particles adhere to the screw and ensure secure seating of the tool in the screw head.
Design: SIT tip, tough-hard.
Improved force transmission due to 6 contact faces.
Faster screwing and improved fit due to tapered geometry. Reduced ejection forces due to secure fit in the screw.
Size: SIT 30
Length: 25 mm
PU piece: 10"

£1.04


Bits part no. 64400040

"Bits for ASSY®, pias Screws 1/4"" DIN 3126-C 6.3
Description of Design:

Extra-hard - for gentle screwing in wood to prevent breakage.

Tough-hard - for hard screwing in metal and sheet metal to prevent breakage.

Torsion - load peaks in the torsion zone of the bit are cushioned for longer life of the bits.

BiTorsion® - the torsion zone of the BiTorsion® bit has a higher hardness of 20 % compared with the shank. It serves to cushion torque peaks.

Diamond-coated - for universal use, long life. Very small diamond particles adhere to the screw and ensure secure seating of the tool in the screw head.
Design: SIT tip, tough-hard.
Improved force transmission due to 6 contact faces.
Faster screwing and improved fit due to tapered geometry. Reduced ejection forces due to secure fit in the screw.
Size: SIT 40
Length: 25 mm
PU piece: 10"

£1.04


Bits part no. 64410005

"Bits for Slotted Head Screws 1/4"" DIN 3126 E 6.3, tough-hard tip
Description of Design:

Extra-hard - for gentle screwing in wood to prevent breakage.

Tough-hard - for hard screwing in metal and sheet metal to prevent breakage.

Torsion - load peaks in the torsion zone of the bit are cushioned for longer life of the bits.

BiTorsion® - the torsion zone of the BiTorsion® bit has a higher hardness of 20 % compared with the shank. It serves to cushion torque peaks.

Diamond-coated - for universal use, long life. Very small diamond particles adhere to the screw and ensure secure seating of the tool in the screw head.
Blade width: 3 mm
Blade thickness: 0.5 mm
Length: 50 mm
PU piece: 10"

£2.15


Bits part no. 64410010

"Bits for Slotted Head Screws 1/4"" DIN 3126 E 6.3, tough-hard tip
Description of Design:

Extra-hard - for gentle screwing in wood to prevent breakage.

Tough-hard - for hard screwing in metal and sheet metal to prevent breakage.

Torsion - load peaks in the torsion zone of the bit are cushioned for longer life of the bits.

BiTorsion® - the torsion zone of the BiTorsion® bit has a higher hardness of 20 % compared with the shank. It serves to cushion torque peaks.

Diamond-coated - for universal use, long life. Very small diamond particles adhere to the screw and ensure secure seating of the tool in the screw head.
Blade width: 3.5 mm
Blade thickness: 0.6 mm
Length: 50 mm
PU piece: 10"

£2.15


Bits part no. 64410015

"Bits for Slotted Head Screws 1/4"" DIN 3126 E 6.3, tough-hard tip
Description of Design:

Extra-hard - for gentle screwing in wood to prevent breakage.

Tough-hard - for hard screwing in metal and sheet metal to prevent breakage.

Torsion - load peaks in the torsion zone of the bit are cushioned for longer life of the bits.

BiTorsion® - the torsion zone of the BiTorsion® bit has a higher hardness of 20 % compared with the shank. It serves to cushion torque peaks.

Diamond-coated - for universal use, long life. Very small diamond particles adhere to the screw and ensure secure seating of the tool in the screw head.
Blade width: 4 mm
Blade thickness: 0.8 mm
Length: 50 mm
PU piece: 10"

£2.15


Bits part no. 64410020

"Bits for Slotted Head Screws 1/4"" DIN 3126 E 6.3, tough-hard tip
Description of Design:

Extra-hard - for gentle screwing in wood to prevent breakage.

Tough-hard - for hard screwing in metal and sheet metal to prevent breakage.

Torsion - load peaks in the torsion zone of the bit are cushioned for longer life of the bits.

BiTorsion® - the torsion zone of the BiTorsion® bit has a higher hardness of 20 % compared with the shank. It serves to cushion torque peaks.

Diamond-coated - for universal use, long life. Very small diamond particles adhere to the screw and ensure secure seating of the tool in the screw head.
Blade width: 4 mm
Blade thickness: 0.8 mm
Length: 89 mm
PU piece: 10"

£3.13


Bits part no. 64410025

"Bits for Slotted Head Screws 1/4"" DIN 3126 E 6.3, tough-hard tip
Description of Design:

Extra-hard - for gentle screwing in wood to prevent breakage.

Tough-hard - for hard screwing in metal and sheet metal to prevent breakage.

Torsion - load peaks in the torsion zone of the bit are cushioned for longer life of the bits.

BiTorsion® - the torsion zone of the BiTorsion® bit has a higher hardness of 20 % compared with the shank. It serves to cushion torque peaks.

Diamond-coated - for universal use, long life. Very small diamond particles adhere to the screw and ensure secure seating of the tool in the screw head.
Blade width: 5.5 mm
Blade thickness: 0.8 mm
Length: 50 mm
PU piece: 10"

£2.15


Bits part no. 64410030

"Bits for Slotted Head Screws 1/4"" DIN 3126 E 6.3, tough-hard tip
Description of Design:

Extra-hard - for gentle screwing in wood to prevent breakage.

Tough-hard - for hard screwing in metal and sheet metal to prevent breakage.

Torsion - load peaks in the torsion zone of the bit are cushioned for longer life of the bits.

BiTorsion® - the torsion zone of the BiTorsion® bit has a higher hardness of 20 % compared with the shank. It serves to cushion torque peaks.

Diamond-coated - for universal use, long life. Very small diamond particles adhere to the screw and ensure secure seating of the tool in the screw head.
Blade width: 5.5 mm
Blade thickness: 1 mm
Length: 89 mm
PU piece: 10"

£3.13


Bits part no. 64410035

"Bits for Slotted Head Screws 1/4"" DIN 3126 E 6.3, tough-hard tip
Description of Design:

Extra-hard - for gentle screwing in wood to prevent breakage.

Tough-hard - for hard screwing in metal and sheet metal to prevent breakage.

Torsion - load peaks in the torsion zone of the bit are cushioned for longer life of the bits.

BiTorsion® - the torsion zone of the BiTorsion® bit has a higher hardness of 20 % compared with the shank. It serves to cushion torque peaks.

Diamond-coated - for universal use, long life. Very small diamond particles adhere to the screw and ensure secure seating of the tool in the screw head.
Blade width: 6.5 mm
Blade thickness: 1.2 mm
Length: 50 mm
PU piece: 10"

£2.15


Bits part no. 64410036

"Bits for Slotted Head Screws 1/4"" DIN 3126 E 6.3, tough-hard tip
Description of Design:

Extra-hard - for gentle screwing in wood to prevent breakage.

Tough-hard - for hard screwing in metal and sheet metal to prevent breakage.

Torsion - load peaks in the torsion zone of the bit are cushioned for longer life of the bits.

BiTorsion® - the torsion zone of the BiTorsion® bit has a higher hardness of 20 % compared with the shank. It serves to cushion torque peaks.

Diamond-coated - for universal use, long life. Very small diamond particles adhere to the screw and ensure secure seating of the tool in the screw head.
Blade width: 6.5 mm
Blade thickness: 1.2 mm
Length: 89 mm
PU piece: 10"

£3.13


Bits part no. 64410040

"Bits for Slotted Head Screws 1/4"" DIN 3126 E 6.3, tough-hard tip
Description of Design:

Extra-hard - for gentle screwing in wood to prevent breakage.

Tough-hard - for hard screwing in metal and sheet metal to prevent breakage.

Torsion - load peaks in the torsion zone of the bit are cushioned for longer life of the bits.

BiTorsion® - the torsion zone of the BiTorsion® bit has a higher hardness of 20 % compared with the shank. It serves to cushion torque peaks.

Diamond-coated - for universal use, long life. Very small diamond particles adhere to the screw and ensure secure seating of the tool in the screw head.
Blade width: 8 mm
Blade thickness: 1.2 mm
Length: 50 mm
PU piece: 10"

£2.15


Bits part no. 64410045

"Bits for Slotted Head Screws 1/4"" DIN 3126 E 6.3, tough-hard tip
Description of Design:

Extra-hard - for gentle screwing in wood to prevent breakage.

Tough-hard - for hard screwing in metal and sheet metal to prevent breakage.

Torsion - load peaks in the torsion zone of the bit are cushioned for longer life of the bits.

BiTorsion® - the torsion zone of the BiTorsion® bit has a higher hardness of 20 % compared with the shank. It serves to cushion torque peaks.

Diamond-coated - for universal use, long life. Very small diamond particles adhere to the screw and ensure secure seating of the tool in the screw head.
Blade width: 8 mm
Blade thickness: 1.2 mm
Length: 89 mm
PU piece: 10"

£3.13


Bits part no. 64420005

"Bits for TORX® Screws 1/4"" DIN 3126 C 6.3, BiTorsion®, diamond-coated
Description of Design:

Extra-hard - for gentle screwing in wood to prevent breakage.

Tough-hard - for hard screwing in metal and sheet metal to prevent breakage.

Torsion - load peaks in the torsion zone of the bit are cushioned for longer life of the bits.

BiTorsion® - the torsion zone of the BiTorsion® bit has a higher hardness of 20 % compared with the shank. It serves to cushion torque peaks.

Diamond-coated - for universal use, long life. Very small diamond particles adhere to the screw and ensure secure seating of the tool in the screw head.
Dimensions: T 10
Length: 25 mm
PU piece: 10"

£2.45


Bits part no. 64420010

"Bits for TORX® Screws 1/4"" DIN 3126 C 6.3, BiTorsion®, diamond-coated
Description of Design:

Extra-hard - for gentle screwing in wood to prevent breakage.

Tough-hard - for hard screwing in metal and sheet metal to prevent breakage.

Torsion - load peaks in the torsion zone of the bit are cushioned for longer life of the bits.

BiTorsion® - the torsion zone of the BiTorsion® bit has a higher hardness of 20 % compared with the shank. It serves to cushion torque peaks.

Diamond-coated - for universal use, long life. Very small diamond particles adhere to the screw and ensure secure seating of the tool in the screw head.
Dimensions: T 15
Length: 25 mm
PU piece: 10"

£2.45


Bits part no. 64420015

"Bits for TORX® Screws 1/4"" DIN 3126 C 6.3, BiTorsion®, diamond-coated
Description of Design:

Extra-hard - for gentle screwing in wood to prevent breakage.

Tough-hard - for hard screwing in metal and sheet metal to prevent breakage.

Torsion - load peaks in the torsion zone of the bit are cushioned for longer life of the bits.

BiTorsion® - the torsion zone of the BiTorsion® bit has a higher hardness of 20 % compared with the shank. It serves to cushion torque peaks.

Diamond-coated - for universal use, long life. Very small diamond particles adhere to the screw and ensure secure seating of the tool in the screw head.
Dimensions: T 20
Length: 25 mm
PU piece: 10"

£2.45


Bits part no. 64420020

"Bits for TORX® Screws 1/4"" DIN 3126 C 6.3, BiTorsion®, diamond-coated
Description of Design:

Extra-hard - for gentle screwing in wood to prevent breakage.

Tough-hard - for hard screwing in metal and sheet metal to prevent breakage.

Torsion - load peaks in the torsion zone of the bit are cushioned for longer life of the bits.

BiTorsion® - the torsion zone of the BiTorsion® bit has a higher hardness of 20 % compared with the shank. It serves to cushion torque peaks.

Diamond-coated - for universal use, long life. Very small diamond particles adhere to the screw and ensure secure seating of the tool in the screw head.
Dimensions: T 25
Length: 25 mm
PU piece: 10"

£2.45


Bits part no. 64420030

"Bits for TORX® Screws 1/4"" DIN 3126 C 6.3, BiTorsion®, diamond-coated
Description of Design:

Extra-hard - for gentle screwing in wood to prevent breakage.

Tough-hard - for hard screwing in metal and sheet metal to prevent breakage.

Torsion - load peaks in the torsion zone of the bit are cushioned for longer life of the bits.

BiTorsion® - the torsion zone of the BiTorsion® bit has a higher hardness of 20 % compared with the shank. It serves to cushion torque peaks.

Diamond-coated - for universal use, long life. Very small diamond particles adhere to the screw and ensure secure seating of the tool in the screw head.
Dimensions: T 30
Length: 25 mm
PU piece: 10"

£2.45


Bits part no. 64420035

"Bits for TORX® Screws 1/4"" DIN 3126 C 6.3, BiTorsion®, diamond-coated
Description of Design:

Extra-hard - for gentle screwing in wood to prevent breakage.

Tough-hard - for hard screwing in metal and sheet metal to prevent breakage.

Torsion - load peaks in the torsion zone of the bit are cushioned for longer life of the bits.

BiTorsion® - the torsion zone of the BiTorsion® bit has a higher hardness of 20 % compared with the shank. It serves to cushion torque peaks.

Diamond-coated - for universal use, long life. Very small diamond particles adhere to the screw and ensure secure seating of the tool in the screw head.
Dimensions: T 40
Length: 25 mm
PU piece: 10"

£2.45


Bits part no. 64430005

"Socket Bits 1/4"" for Phillips Cross Recess Screws, 1/4"" square drive DIN 3126 E 6.3, long version
Description of Design:

Extra-hard - for gentle screwing in wood to prevent breakage.

Tough-hard - for hard screwing in metal and sheet metal to prevent breakage.

Torsion - load peaks in the torsion zone of the bit are cushioned for longer life of the bits.

BiTorsion® - the torsion zone of the BiTorsion® bit has a higher hardness of 20 % compared with the shank. It serves to cushion torque peaks.

Diamond-coated - for universal use, long life. Very small diamond particles adhere to the screw and ensure secure seating of the tool in the screw head.
Design: Drive toughened.
Dimensions: PH 1
Length: 70 mm
PU piece: 10"

£2.64


Bits part no. 64430010

"Socket Bits 1/4"" for Phillips Cross Recess Screws, 1/4"" square drive DIN 3126 E 6.3, long version
Description of Design:

Extra-hard - for gentle screwing in wood to prevent breakage.

Tough-hard - for hard screwing in metal and sheet metal to prevent breakage.

Torsion - load peaks in the torsion zone of the bit are cushioned for longer life of the bits.

BiTorsion® - the torsion zone of the BiTorsion® bit has a higher hardness of 20 % compared with the shank. It serves to cushion torque peaks.

Diamond-coated - for universal use, long life. Very small diamond particles adhere to the screw and ensure secure seating of the tool in the screw head.
Design: Drive toughened.
Dimensions: PH 1
Length: 89 mm
PU piece: 10"

£3.06


Bits part no. 64430012

"Socket Bits 1/4"" for Phillips Cross Recess Screws, 1/4"" square drive DIN 3126 E 6.3, long version
Description of Design:

Extra-hard - for gentle screwing in wood to prevent breakage.

Tough-hard - for hard screwing in metal and sheet metal to prevent breakage.

Torsion - load peaks in the torsion zone of the bit are cushioned for longer life of the bits.

BiTorsion® - the torsion zone of the BiTorsion® bit has a higher hardness of 20 % compared with the shank. It serves to cushion torque peaks.

Diamond-coated - for universal use, long life. Very small diamond particles adhere to the screw and ensure secure seating of the tool in the screw head.
Design: Drive toughened.
Dimensions: PH 1
Length: 152 mm
PU piece: 10"

£4.37


Bits part no. 64430015

"Socket Bits 1/4"" for Phillips Cross Recess Screws, 1/4"" square drive DIN 3126 E 6.3, long version
Description of Design:

Extra-hard - for gentle screwing in wood to prevent breakage.

Tough-hard - for hard screwing in metal and sheet metal to prevent breakage.

Torsion - load peaks in the torsion zone of the bit are cushioned for longer life of the bits.

BiTorsion® - the torsion zone of the BiTorsion® bit has a higher hardness of 20 % compared with the shank. It serves to cushion torque peaks.

Diamond-coated - for universal use, long life. Very small diamond particles adhere to the screw and ensure secure seating of the tool in the screw head.
Design: Drive toughened.
Dimensions: PH 2
Length: 70 mm
PU piece: 10"

£2.64


Bits part no. 64430020

"Socket Bits 1/4"" for Phillips Cross Recess Screws, 1/4"" square drive DIN 3126 E 6.3, long version
Description of Design:

Extra-hard - for gentle screwing in wood to prevent breakage.

Tough-hard - for hard screwing in metal and sheet metal to prevent breakage.

Torsion - load peaks in the torsion zone of the bit are cushioned for longer life of the bits.

BiTorsion® - the torsion zone of the BiTorsion® bit has a higher hardness of 20 % compared with the shank. It serves to cushion torque peaks.

Diamond-coated - for universal use, long life. Very small diamond particles adhere to the screw and ensure secure seating of the tool in the screw head.
Design: Drive toughened.
Dimensions: PH 2
Length: 89 mm
PU piece: 10"

£3.06


Bits part no. 64430022

"Socket Bits 1/4"" for Phillips Cross Recess Screws, 1/4"" square drive DIN 3126 E 6.3, long version
Description of Design:

Extra-hard - for gentle screwing in wood to prevent breakage.

Tough-hard - for hard screwing in metal and sheet metal to prevent breakage.

Torsion - load peaks in the torsion zone of the bit are cushioned for longer life of the bits.

BiTorsion® - the torsion zone of the BiTorsion® bit has a higher hardness of 20 % compared with the shank. It serves to cushion torque peaks.

Diamond-coated - for universal use, long life. Very small diamond particles adhere to the screw and ensure secure seating of the tool in the screw head.
Design: Drive toughened.
Dimensions: PH 2
Length: 152 mm
PU piece: 10"

£4.37


Bits part no. 64430025

"Socket Bits 1/4"" for Phillips Cross Recess Screws, 1/4"" square drive DIN 3126 E 6.3, long version
Description of Design:

Extra-hard - for gentle screwing in wood to prevent breakage.

Tough-hard - for hard screwing in metal and sheet metal to prevent breakage.

Torsion - load peaks in the torsion zone of the bit are cushioned for longer life of the bits.

BiTorsion® - the torsion zone of the BiTorsion® bit has a higher hardness of 20 % compared with the shank. It serves to cushion torque peaks.

Diamond-coated - for universal use, long life. Very small diamond particles adhere to the screw and ensure secure seating of the tool in the screw head.
Design: Drive toughened.
Dimensions: PH 3
Length: 70 mm
PU piece: 10"

£2.64


Bits part no. 64430030

"Socket Bits 1/4"" for Phillips Cross Recess Screws, 1/4"" square drive DIN 3126 E 6.3, long version
Description of Design:

Extra-hard - for gentle screwing in wood to prevent breakage.

Tough-hard - for hard screwing in metal and sheet metal to prevent breakage.

Torsion - load peaks in the torsion zone of the bit are cushioned for longer life of the bits.

BiTorsion® - the torsion zone of the BiTorsion® bit has a higher hardness of 20 % compared with the shank. It serves to cushion torque peaks.

Diamond-coated - for universal use, long life. Very small diamond particles adhere to the screw and ensure secure seating of the tool in the screw head.
Design: Drive toughened.
Dimensions: PH 3
Length: 89 mm
PU piece: 10"

£3.06


Bits part no. 64430032

"Socket Bits 1/4"" for Phillips Cross Recess Screws, 1/4"" square drive DIN 3126 E 6.3, long version
Description of Design:

Extra-hard - for gentle screwing in wood to prevent breakage.

Tough-hard - for hard screwing in metal and sheet metal to prevent breakage.

Torsion - load peaks in the torsion zone of the bit are cushioned for longer life of the bits.

BiTorsion® - the torsion zone of the BiTorsion® bit has a higher hardness of 20 % compared with the shank. It serves to cushion torque peaks.

Diamond-coated - for universal use, long life. Very small diamond particles adhere to the screw and ensure secure seating of the tool in the screw head.
Design: Drive toughened.
Dimensions: PH 3
Length: 152 mm
PU piece: 10"

£4.37


Bits part no. 64440003

"INOX Bits for Recess TORX® Screws 1/4"" DIN 3126 C 6.3 Stainless
Description of Design:

Extra-hard - for gentle screwing in wood to prevent breakage.

Tough-hard - for hard screwing in metal and sheet metal to prevent breakage.

Torsion - load peaks in the torsion zone of the bit are cushioned for longer life of the bits.

BiTorsion® - the torsion zone of the BiTorsion® bit has a higher hardness of 20 % compared with the shank. It serves to cushion torque peaks.

Diamond-coated - for universal use, long life. Very small diamond particles adhere to the screw and ensure secure seating of the tool in the screw head.
Design: Made of stainless steel. Thanks to the vacuum ice-hardening the tip features the same hardness as conventional tools and is therefore workshop-compatible and wear-resistant.

Application: Bits from stainless steel are used where extraneous rust at stainless steel is to be avoided. Especially for screwing stainless steel screws in window and door construction, in case of fittings and sinks, facades, handrails, balconies, fences etc.

Note: Extraneous rust in stainless steel processing is caused by tools made of normal steel. Abraded particles are thereby produced which adhere to the stainless steel. These particles become rust under the effect of oxygen. Use stainless steel tools only for stainless steel screws and store them separately! Extraneous rust is thereby avoided.
Stainless Rapidaptor® see (part no. 6428 0010).

Description of Design:
Extra-hard - for gentle screwing in wood to prevent breakage.
Tough-hard - for hard screwing in metal and sheet metal to prevent breakage.
Torsion - load peaks in the torsion zone of the bit are cushioned for longer life of the bits.
BiTorsion® - the torsion zone of the BiTorsion® bit has a hardness reduced by 20 % compared with the shank. It serves to cushion torque peaks. Longer life of the bits.
Diamond-coated - for universal use, long life. Very small diamond particles adhere to the screw and ensure secure seating of the tool in the screw head.

General Note: TORX PLUS® tools are superior to TORX® tools in torque transmission, due to the significantly larger contact face in the screw.
Attention: The TORX® system and the TORX PLUS® system are compatible only to a limited extent: The operation (restricted) of a TORX PLUS® tool with the conventional TORX® tool is possible. The use of TORX PLUS® with the conventional TORX® profile is however not possible.
Size: T 8
Length: 25 mm
PU piece: 10"

£2.58


Bits part no. 64440004

"INOX Bits for Recess TORX® Screws 1/4"" DIN 3126 C 6.3 Stainless
Description of Design:

Extra-hard - for gentle screwing in wood to prevent breakage.

Tough-hard - for hard screwing in metal and sheet metal to prevent breakage.

Torsion - load peaks in the torsion zone of the bit are cushioned for longer life of the bits.

BiTorsion® - the torsion zone of the BiTorsion® bit has a higher hardness of 20 % compared with the shank. It serves to cushion torque peaks.

Diamond-coated - for universal use, long life. Very small diamond particles adhere to the screw and ensure secure seating of the tool in the screw head.
Design: Made of stainless steel. Thanks to the vacuum ice-hardening the tip features the same hardness as conventional tools and is therefore workshop-compatible and wear-resistant.

Application: Bits from stainless steel are used where extraneous rust at stainless steel is to be avoided. Especially for screwing stainless steel screws in window and door construction, in case of fittings and sinks, facades, handrails, balconies, fences etc.

Note: Extraneous rust in stainless steel processing is caused by tools made of normal steel. Abraded particles are thereby produced which adhere to the stainless steel. These particles become rust under the effect of oxygen. Use stainless steel tools only for stainless steel screws and store them separately! Extraneous rust is thereby avoided.
Stainless Rapidaptor® see (part no. 6428 0010).

Description of Design:
Extra-hard - for gentle screwing in wood to prevent breakage.
Tough-hard - for hard screwing in metal and sheet metal to prevent breakage.
Torsion - load peaks in the torsion zone of the bit are cushioned for longer life of the bits.
BiTorsion® - the torsion zone of the BiTorsion® bit has a hardness reduced by 20 % compared with the shank. It serves to cushion torque peaks. Longer life of the bits.
Diamond-coated - for universal use, long life. Very small diamond particles adhere to the screw and ensure secure seating of the tool in the screw head.

General Note: TORX PLUS® tools are superior to TORX® tools in torque transmission, due to the significantly larger contact face in the screw.
Attention: The TORX® system and the TORX PLUS® system are compatible only to a limited extent: The operation (restricted) of a TORX PLUS® tool with the conventional TORX® tool is possible. The use of TORX PLUS® with the conventional TORX® profile is however not possible.
Size: T 9
Length: 25 mm
PU piece: 10"

£2.58


Bits part no. 64440005

"INOX Bits for Recess TORX® Screws 1/4"" DIN 3126 C 6.3 Stainless
Description of Design:

Extra-hard - for gentle screwing in wood to prevent breakage.

Tough-hard - for hard screwing in metal and sheet metal to prevent breakage.

Torsion - load peaks in the torsion zone of the bit are cushioned for longer life of the bits.

BiTorsion® - the torsion zone of the BiTorsion® bit has a higher hardness of 20 % compared with the shank. It serves to cushion torque peaks.

Diamond-coated - for universal use, long life. Very small diamond particles adhere to the screw and ensure secure seating of the tool in the screw head.
Design: Made of stainless steel. Thanks to the vacuum ice-hardening the tip features the same hardness as conventional tools and is therefore workshop-compatible and wear-resistant.

Application: Bits from stainless steel are used where extraneous rust at stainless steel is to be avoided. Especially for screwing stainless steel screws in window and door construction, in case of fittings and sinks, facades, handrails, balconies, fences etc.

Note: Extraneous rust in stainless steel processing is caused by tools made of normal steel. Abraded particles are thereby produced which adhere to the stainless steel. These particles become rust under the effect of oxygen. Use stainless steel tools only for stainless steel screws and store them separately! Extraneous rust is thereby avoided.
Stainless Rapidaptor® see (part no. 6428 0010).

Description of Design:
Extra-hard - for gentle screwing in wood to prevent breakage.
Tough-hard - for hard screwing in metal and sheet metal to prevent breakage.
Torsion - load peaks in the torsion zone of the bit are cushioned for longer life of the bits.
BiTorsion® - the torsion zone of the BiTorsion® bit has a hardness reduced by 20 % compared with the shank. It serves to cushion torque peaks. Longer life of the bits.
Diamond-coated - for universal use, long life. Very small diamond particles adhere to the screw and ensure secure seating of the tool in the screw head.

General Note: TORX PLUS® tools are superior to TORX® tools in torque transmission, due to the significantly larger contact face in the screw.
Attention: The TORX® system and the TORX PLUS® system are compatible only to a limited extent: The operation (restricted) of a TORX PLUS® tool with the conventional TORX® tool is possible. The use of TORX PLUS® with the conventional TORX® profile is however not possible.
Size: T 10
Length: 25 mm
PU piece: 10"

£2.58


Bits part no. 64440010

"INOX Bits for Recess TORX® Screws 1/4"" DIN 3126 C 6.3 Stainless
Description of Design:

Extra-hard - for gentle screwing in wood to prevent breakage.

Tough-hard - for hard screwing in metal and sheet metal to prevent breakage.

Torsion - load peaks in the torsion zone of the bit are cushioned for longer life of the bits.

BiTorsion® - the torsion zone of the BiTorsion® bit has a higher hardness of 20 % compared with the shank. It serves to cushion torque peaks.

Diamond-coated - for universal use, long life. Very small diamond particles adhere to the screw and ensure secure seating of the tool in the screw head.
Design: Made of stainless steel. Thanks to the vacuum ice-hardening the tip features the same hardness as conventional tools and is therefore workshop-compatible and wear-resistant.

Application: Bits from stainless steel are used where extraneous rust at stainless steel is to be avoided. Especially for screwing stainless steel screws in window and door construction, in case of fittings and sinks, facades, handrails, balconies, fences etc.

Note: Extraneous rust in stainless steel processing is caused by tools made of normal steel. Abraded particles are thereby produced which adhere to the stainless steel. These particles become rust under the effect of oxygen. Use stainless steel tools only for stainless steel screws and store them separately! Extraneous rust is thereby avoided.
Stainless Rapidaptor® see (part no. 6428 0010).

Description of Design:
Extra-hard - for gentle screwing in wood to prevent breakage.
Tough-hard - for hard screwing in metal and sheet metal to prevent breakage.
Torsion - load peaks in the torsion zone of the bit are cushioned for longer life of the bits.
BiTorsion® - the torsion zone of the BiTorsion® bit has a hardness reduced by 20 % compared with the shank. It serves to cushion torque peaks. Longer life of the bits.
Diamond-coated - for universal use, long life. Very small diamond particles adhere to the screw and ensure secure seating of the tool in the screw head.

General Note: TORX PLUS® tools are superior to TORX® tools in torque transmission, due to the significantly larger contact face in the screw.
Attention: The TORX® system and the TORX PLUS® system are compatible only to a limited extent: The operation (restricted) of a TORX PLUS® tool with the conventional TORX® tool is possible. The use of TORX PLUS® with the conventional TORX® profile is however not possible.
Size: T 15
Length: 25 mm
PU piece: 10"

£2.58


Bits part no. 64440015

"INOX Bits for Recess TORX® Screws 1/4"" DIN 3126 C 6.3 Stainless
Description of Design:

Extra-hard - for gentle screwing in wood to prevent breakage.

Tough-hard - for hard screwing in metal and sheet metal to prevent breakage.

Torsion - load peaks in the torsion zone of the bit are cushioned for longer life of the bits.

BiTorsion® - the torsion zone of the BiTorsion® bit has a higher hardness of 20 % compared with the shank. It serves to cushion torque peaks.

Diamond-coated - for universal use, long life. Very small diamond particles adhere to the screw and ensure secure seating of the tool in the screw head.
Design: Made of stainless steel. Thanks to the vacuum ice-hardening the tip features the same hardness as conventional tools and is therefore workshop-compatible and wear-resistant.

Application: Bits from stainless steel are used where extraneous rust at stainless steel is to be avoided. Especially for screwing stainless steel screws in window and door construction, in case of fittings and sinks, facades, handrails, balconies, fences etc.

Note: Extraneous rust in stainless steel processing is caused by tools made of normal steel. Abraded particles are thereby produced which adhere to the stainless steel. These particles become rust under the effect of oxygen. Use stainless steel tools only for stainless steel screws and store them separately! Extraneous rust is thereby avoided.
Stainless Rapidaptor® see (part no. 6428 0010).

Description of Design:
Extra-hard - for gentle screwing in wood to prevent breakage.
Tough-hard - for hard screwing in metal and sheet metal to prevent breakage.
Torsion - load peaks in the torsion zone of the bit are cushioned for longer life of the bits.
BiTorsion® - the torsion zone of the BiTorsion® bit has a hardness reduced by 20 % compared with the shank. It serves to cushion torque peaks. Longer life of the bits.
Diamond-coated - for universal use, long life. Very small diamond particles adhere to the screw and ensure secure seating of the tool in the screw head.

General Note: TORX PLUS® tools are superior to TORX® tools in torque transmission, due to the significantly larger contact face in the screw.
Attention: The TORX® system and the TORX PLUS® system are compatible only to a limited extent: The operation (restricted) of a TORX PLUS® tool with the conventional TORX® tool is possible. The use of TORX PLUS® with the conventional TORX® profile is however not possible.
Size: T 20
Length: 25 mm
PU piece: 10"

£2.58


Bits part no. 64440020

"INOX Bits for Recess TORX® Screws 1/4"" DIN 3126 C 6.3 Stainless
Description of Design:

Extra-hard - for gentle screwing in wood to prevent breakage.

Tough-hard - for hard screwing in metal and sheet metal to prevent breakage.

Torsion - load peaks in the torsion zone of the bit are cushioned for longer life of the bits.

BiTorsion® - the torsion zone of the BiTorsion® bit has a higher hardness of 20 % compared with the shank. It serves to cushion torque peaks.

Diamond-coated - for universal use, long life. Very small diamond particles adhere to the screw and ensure secure seating of the tool in the screw head.
Design: Made of stainless steel. Thanks to the vacuum ice-hardening the tip features the same hardness as conventional tools and is therefore workshop-compatible and wear-resistant.

Application: Bits from stainless steel are used where extraneous rust at stainless steel is to be avoided. Especially for screwing stainless steel screws in window and door construction, in case of fittings and sinks, facades, handrails, balconies, fences etc.

Note: Extraneous rust in stainless steel processing is caused by tools made of normal steel. Abraded particles are thereby produced which adhere to the stainless steel. These particles become rust under the effect of oxygen. Use stainless steel tools only for stainless steel screws and store them separately! Extraneous rust is thereby avoided.
Stainless Rapidaptor® see (part no. 6428 0010).

Description of Design:
Extra-hard - for gentle screwing in wood to prevent breakage.
Tough-hard - for hard screwing in metal and sheet metal to prevent breakage.
Torsion - load peaks in the torsion zone of the bit are cushioned for longer life of the bits.
BiTorsion® - the torsion zone of the BiTorsion® bit has a hardness reduced by 20 % compared with the shank. It serves to cushion torque peaks. Longer life of the bits.
Diamond-coated - for universal use, long life. Very small diamond particles adhere to the screw and ensure secure seating of the tool in the screw head.

General Note: TORX PLUS® tools are superior to TORX® tools in torque transmission, due to the significantly larger contact face in the screw.
Attention: The TORX® system and the TORX PLUS® system are compatible only to a limited extent: The operation (restricted) of a TORX PLUS® tool with the conventional TORX® tool is possible. The use of TORX PLUS® with the conventional TORX® profile is however not possible.
Size: T 25
Length: 25 mm
PU piece: 10"

£2.58


Bits part no. 64440025

"INOX Bits for Recess TORX® Screws 1/4"" DIN 3126 C 6.3 Stainless
Description of Design:

Extra-hard - for gentle screwing in wood to prevent breakage.

Tough-hard - for hard screwing in metal and sheet metal to prevent breakage.

Torsion - load peaks in the torsion zone of the bit are cushioned for longer life of the bits.

BiTorsion® - the torsion zone of the BiTorsion® bit has a higher hardness of 20 % compared with the shank. It serves to cushion torque peaks.

Diamond-coated - for universal use, long life. Very small diamond particles adhere to the screw and ensure secure seating of the tool in the screw head.
Design: Made of stainless steel. Thanks to the vacuum ice-hardening the tip features the same hardness as conventional tools and is therefore workshop-compatible and wear-resistant.

Application: Bits from stainless steel are used where extraneous rust at stainless steel is to be avoided. Especially for screwing stainless steel screws in window and door construction, in case of fittings and sinks, facades, handrails, balconies, fences etc.

Note: Extraneous rust in stainless steel processing is caused by tools made of normal steel. Abraded particles are thereby produced which adhere to the stainless steel. These particles become rust under the effect of oxygen. Use stainless steel tools only for stainless steel screws and store them separately! Extraneous rust is thereby avoided.
Stainless Rapidaptor® see (part no. 6428 0010).

Description of Design:
Extra-hard - for gentle screwing in wood to prevent breakage.
Tough-hard - for hard screwing in metal and sheet metal to prevent breakage.
Torsion - load peaks in the torsion zone of the bit are cushioned for longer life of the bits.
BiTorsion® - the torsion zone of the BiTorsion® bit has a hardness reduced by 20 % compared with the shank. It serves to cushion torque peaks. Longer life of the bits.
Diamond-coated - for universal use, long life. Very small diamond particles adhere to the screw and ensure secure seating of the tool in the screw head.

General Note: TORX PLUS® tools are superior to TORX® tools in torque transmission, due to the significantly larger contact face in the screw.
Attention: The TORX® system and the TORX PLUS® system are compatible only to a limited extent: The operation (restricted) of a TORX PLUS® tool with the conventional TORX® tool is possible. The use of TORX PLUS® with the conventional TORX® profile is however not possible.
Size: T 27
Length: 25 mm
PU piece: 10"

£2.58


Bits part no. 64440030

"INOX Bits for Recess TORX® Screws 1/4"" DIN 3126 C 6.3 Stainless
Description of Design:

Extra-hard - for gentle screwing in wood to prevent breakage.

Tough-hard - for hard screwing in metal and sheet metal to prevent breakage.

Torsion - load peaks in the torsion zone of the bit are cushioned for longer life of the bits.

BiTorsion® - the torsion zone of the BiTorsion® bit has a higher hardness of 20 % compared with the shank. It serves to cushion torque peaks.

Diamond-coated - for universal use, long life. Very small diamond particles adhere to the screw and ensure secure seating of the tool in the screw head.
Design: Made of stainless steel. Thanks to the vacuum ice-hardening the tip features the same hardness as conventional tools and is therefore workshop-compatible and wear-resistant.

Application: Bits from stainless steel are used where extraneous rust at stainless steel is to be avoided. Especially for screwing stainless steel screws in window and door construction, in case of fittings and sinks, facades, handrails, balconies, fences etc.

Note: Extraneous rust in stainless steel processing is caused by tools made of normal steel. Abraded particles are thereby produced which adhere to the stainless steel. These particles become rust under the effect of oxygen. Use stainless steel tools only for stainless steel screws and store them separately! Extraneous rust is thereby avoided.
Stainless Rapidaptor® see (part no. 6428 0010).

Description of Design:
Extra-hard - for gentle screwing in wood to prevent breakage.
Tough-hard - for hard screwing in metal and sheet metal to prevent breakage.
Torsion - load peaks in the torsion zone of the bit are cushioned for longer life of the bits.
BiTorsion® - the torsion zone of the BiTorsion® bit has a hardness reduced by 20 % compared with the shank. It serves to cushion torque peaks. Longer life of the bits.
Diamond-coated - for universal use, long life. Very small diamond particles adhere to the screw and ensure secure seating of the tool in the screw head.

General Note: TORX PLUS® tools are superior to TORX® tools in torque transmission, due to the significantly larger contact face in the screw.
Attention: The TORX® system and the TORX PLUS® system are compatible only to a limited extent: The operation (restricted) of a TORX PLUS® tool with the conventional TORX® tool is possible. The use of TORX PLUS® with the conventional TORX® profile is however not possible.
Size: T 30
Length: 25 mm
PU piece: 10"

£2.58


Bits part no. 64440035

"INOX Bits for Recess TORX® Screws 1/4"" DIN 3126 C 6.3 Stainless
Description of Design:

Extra-hard - for gentle screwing in wood to prevent breakage.

Tough-hard - for hard screwing in metal and sheet metal to prevent breakage.

Torsion - load peaks in the torsion zone of the bit are cushioned for longer life of the bits.

BiTorsion® - the torsion zone of the BiTorsion® bit has a higher hardness of 20 % compared with the shank. It serves to cushion torque peaks.

Diamond-coated - for universal use, long life. Very small diamond particles adhere to the screw and ensure secure seating of the tool in the screw head.
Design: Made of stainless steel. Thanks to the vacuum ice-hardening the tip features the same hardness as conventional tools and is therefore workshop-compatible and wear-resistant.

Application: Bits from stainless steel are used where extraneous rust at stainless steel is to be avoided. Especially for screwing stainless steel screws in window and door construction, in case of fittings and sinks, facades, handrails, balconies, fences etc.

Note: Extraneous rust in stainless steel processing is caused by tools made of normal steel. Abraded particles are thereby produced which adhere to the stainless steel. These particles become rust under the effect of oxygen. Use stainless steel tools only for stainless steel screws and store them separately! Extraneous rust is thereby avoided.
Stainless Rapidaptor® see (part no. 6428 0010).

Description of Design:
Extra-hard - for gentle screwing in wood to prevent breakage.
Tough-hard - for hard screwing in metal and sheet metal to prevent breakage.
Torsion - load peaks in the torsion zone of the bit are cushioned for longer life of the bits.
BiTorsion® - the torsion zone of the BiTorsion® bit has a hardness reduced by 20 % compared with the shank. It serves to cushion torque peaks. Longer life of the bits.
Diamond-coated - for universal use, long life. Very small diamond particles adhere to the screw and ensure secure seating of the tool in the screw head.

General Note: TORX PLUS® tools are superior to TORX® tools in torque transmission, due to the significantly larger contact face in the screw.
Attention: The TORX® system and the TORX PLUS® system are compatible only to a limited extent: The operation (restricted) of a TORX PLUS® tool with the conventional TORX® tool is possible. The use of TORX PLUS® with the conventional TORX® profile is however not possible.
Size: T 40
Length: 25 mm
PU piece: 10"

£2.58


Bits part no. 64450005

"Bits for Cross Head Screws Pozidriv 1/4"" DIN 3126 E 6.3, long version
Description of Design:

Extra-hard - for gentle screwing in wood to prevent breakage.

Tough-hard - for hard screwing in metal and sheet metal to prevent breakage.

Torsion - load peaks in the torsion zone of the bit are cushioned for longer life of the bits.

BiTorsion® - the torsion zone of the BiTorsion® bit has a higher hardness of 20 % compared with the shank. It serves to cushion torque peaks.

Diamond-coated - for universal use, long life. Very small diamond particles adhere to the screw and ensure secure seating of the tool in the screw head.
Design: Tip toughened.
Dimensions: PZ 1
Length: 70 mm
PU piece: 10"

£2.64


Bits part no. 64450010

"Bits for Cross Head Screws Pozidriv 1/4"" DIN 3126 E 6.3, long version
Description of Design:

Extra-hard - for gentle screwing in wood to prevent breakage.

Tough-hard - for hard screwing in metal and sheet metal to prevent breakage.

Torsion - load peaks in the torsion zone of the bit are cushioned for longer life of the bits.

BiTorsion® - the torsion zone of the BiTorsion® bit has a higher hardness of 20 % compared with the shank. It serves to cushion torque peaks.

Diamond-coated - for universal use, long life. Very small diamond particles adhere to the screw and ensure secure seating of the tool in the screw head.
Design: Tip toughened.
Dimensions: PZ 1
Length: 89 mm
PU piece: 10"

£3.06


Bits part no. 64450015

"Bits for Cross Head Screws Pozidriv 1/4"" DIN 3126 E 6.3, long version
Description of Design:

Extra-hard - for gentle screwing in wood to prevent breakage.

Tough-hard - for hard screwing in metal and sheet metal to prevent breakage.

Torsion - load peaks in the torsion zone of the bit are cushioned for longer life of the bits.

BiTorsion® - the torsion zone of the BiTorsion® bit has a higher hardness of 20 % compared with the shank. It serves to cushion torque peaks.

Diamond-coated - for universal use, long life. Very small diamond particles adhere to the screw and ensure secure seating of the tool in the screw head.
Design: Tip toughened.
Dimensions: PZ 2
Length: 70 mm
PU piece: 10"

£2.64


Bits part no. 64450020

"Bits for Cross Head Screws Pozidriv 1/4"" DIN 3126 E 6.3, long version
Description of Design:

Extra-hard - for gentle screwing in wood to prevent breakage.

Tough-hard - for hard screwing in metal and sheet metal to prevent breakage.

Torsion - load peaks in the torsion zone of the bit are cushioned for longer life of the bits.

BiTorsion® - the torsion zone of the BiTorsion® bit has a higher hardness of 20 % compared with the shank. It serves to cushion torque peaks.

Diamond-coated - for universal use, long life. Very small diamond particles adhere to the screw and ensure secure seating of the tool in the screw head.
Design: Tip toughened.
Dimensions: PZ 2
Length: 89 mm
PU piece: 10"

£3.06


Bits part no. 64450025

"Bits for Cross Head Screws Pozidriv 1/4"" DIN 3126 E 6.3, long version
Description of Design:

Extra-hard - for gentle screwing in wood to prevent breakage.

Tough-hard - for hard screwing in metal and sheet metal to prevent breakage.

Torsion - load peaks in the torsion zone of the bit are cushioned for longer life of the bits.

BiTorsion® - the torsion zone of the BiTorsion® bit has a higher hardness of 20 % compared with the shank. It serves to cushion torque peaks.

Diamond-coated - for universal use, long life. Very small diamond particles adhere to the screw and ensure secure seating of the tool in the screw head.
Design: Tip toughened.
Dimensions: PZ 3
Length: 70 mm
PU piece: 10"

£2.64


Bits part no. 64450030

"Bits for Cross Head Screws Pozidriv 1/4"" DIN 3126 E 6.3, long version
Description of Design:

Extra-hard - for gentle screwing in wood to prevent breakage.

Tough-hard - for hard screwing in metal and sheet metal to prevent breakage.

Torsion - load peaks in the torsion zone of the bit are cushioned for longer life of the bits.

BiTorsion® - the torsion zone of the BiTorsion® bit has a higher hardness of 20 % compared with the shank. It serves to cushion torque peaks.

Diamond-coated - for universal use, long life. Very small diamond particles adhere to the screw and ensure secure seating of the tool in the screw head.
Design: Tip toughened.
Dimensions: PZ 3
Length: 89 mm
PU piece: 10"

£3.06


Bits part no. 64460005

"Bits for Recess TORX® Screws with ABC-TORX® profile 1/4"" DIN 3126 C 6.3
Description of Design:

Extra-hard - for gentle screwing in wood to prevent breakage.

Tough-hard - for hard screwing in metal and sheet metal to prevent breakage.

Torsion - load peaks in the torsion zone of the bit are cushioned for longer life of the bits.

BiTorsion® - the torsion zone of the BiTorsion® bit has a higher hardness of 20 % compared with the shank. It serves to cushion torque peaks.

Diamond-coated - for universal use, long life. Very small diamond particles adhere to the screw and ensure secure seating of the tool in the screw head.
Design: Though-hard tip, with tenon.

Application: Especially for screws with ABC-TORX® profile.

Description of Design:
Extra-hard - for gentle screwing in wood to prevent breakage.
Tough-hard - for hard screwing in metal and sheet metal to prevent breakage.
Torsion - load peaks in the torsion zone of the bit are cushioned for longer life of the bits.
BiTorsion® - the torsion zone of the BiTorsion® bit has a hardness reduced by 20 % compared with the shank. It serves to cushion torque peaks. Longer life of the bits.
Diamond-coated - for universal use, long life. Very small diamond particles adhere to the screw and ensure secure seating of the tool in the screw head.

General Note: TORX PLUS® tools are superior to TORX® tools in torque transmission, due to the significantly larger contact face in the screw.
Attention: The TORX® system and the TORX PLUS® system are compatible only to a limited extent: The operation (restricted) of a TORX PLUS® tool with the conventional TORX® tool is possible. The use of TORX PLUS® with the conventional TORX® profile is however not possible.
Size: T 10
Length: 25 mm
PU piece: 10"

£0.73


Bits part no. 64460010

"Bits for Recess TORX® Screws with ABC-TORX® profile 1/4"" DIN 3126 C 6.3
Description of Design:

Extra-hard - for gentle screwing in wood to prevent breakage.

Tough-hard - for hard screwing in metal and sheet metal to prevent breakage.

Torsion - load peaks in the torsion zone of the bit are cushioned for longer life of the bits.

BiTorsion® - the torsion zone of the BiTorsion® bit has a higher hardness of 20 % compared with the shank. It serves to cushion torque peaks.

Diamond-coated - for universal use, long life. Very small diamond particles adhere to the screw and ensure secure seating of the tool in the screw head.
Design: Though-hard tip, with tenon.

Application: Especially for screws with ABC-TORX® profile.

Description of Design:
Extra-hard - for gentle screwing in wood to prevent breakage.
Tough-hard - for hard screwing in metal and sheet metal to prevent breakage.
Torsion - load peaks in the torsion zone of the bit are cushioned for longer life of the bits.
BiTorsion® - the torsion zone of the BiTorsion® bit has a hardness reduced by 20 % compared with the shank. It serves to cushion torque peaks. Longer life of the bits.
Diamond-coated - for universal use, long life. Very small diamond particles adhere to the screw and ensure secure seating of the tool in the screw head.

General Note: TORX PLUS® tools are superior to TORX® tools in torque transmission, due to the significantly larger contact face in the screw.
Attention: The TORX® system and the TORX PLUS® system are compatible only to a limited extent: The operation (restricted) of a TORX PLUS® tool with the conventional TORX® tool is possible. The use of TORX PLUS® with the conventional TORX® profile is however not possible.
Size: T 15
Length: 25 mm
PU piece: 10"

£0.73


Bits part no. 64460015

"Bits for Recess TORX® Screws with ABC-TORX® profile 1/4"" DIN 3126 C 6.3
Description of Design:

Extra-hard - for gentle screwing in wood to prevent breakage.

Tough-hard - for hard screwing in metal and sheet metal to prevent breakage.

Torsion - load peaks in the torsion zone of the bit are cushioned for longer life of the bits.

BiTorsion® - the torsion zone of the BiTorsion® bit has a higher hardness of 20 % compared with the shank. It serves to cushion torque peaks.

Diamond-coated - for universal use, long life. Very small diamond particles adhere to the screw and ensure secure seating of the tool in the screw head.
Design: Though-hard tip, with tenon.

Application: Especially for screws with ABC-TORX® profile.

Description of Design:
Extra-hard - for gentle screwing in wood to prevent breakage.
Tough-hard - for hard screwing in metal and sheet metal to prevent breakage.
Torsion - load peaks in the torsion zone of the bit are cushioned for longer life of the bits.
BiTorsion® - the torsion zone of the BiTorsion® bit has a hardness reduced by 20 % compared with the shank. It serves to cushion torque peaks. Longer life of the bits.
Diamond-coated - for universal use, long life. Very small diamond particles adhere to the screw and ensure secure seating of the tool in the screw head.

General Note: TORX PLUS® tools are superior to TORX® tools in torque transmission, due to the significantly larger contact face in the screw.
Attention: The TORX® system and the TORX PLUS® system are compatible only to a limited extent: The operation (restricted) of a TORX PLUS® tool with the conventional TORX® tool is possible. The use of TORX PLUS® with the conventional TORX® profile is however not possible.
Size: T 20
Length: 25 mm
PU piece: 10"

£0.73


Bits part no. 64460020

"Bits for Recess TORX® Screws with ABC-TORX® profile 1/4"" DIN 3126 C 6.3
Description of Design:

Extra-hard - for gentle screwing in wood to prevent breakage.

Tough-hard - for hard screwing in metal and sheet metal to prevent breakage.

Torsion - load peaks in the torsion zone of the bit are cushioned for longer life of the bits.

BiTorsion® - the torsion zone of the BiTorsion® bit has a higher hardness of 20 % compared with the shank. It serves to cushion torque peaks.

Diamond-coated - for universal use, long life. Very small diamond particles adhere to the screw and ensure secure seating of the tool in the screw head.
Design: Though-hard tip, with tenon.

Application: Especially for screws with ABC-TORX® profile.

Description of Design:
Extra-hard - for gentle screwing in wood to prevent breakage.
Tough-hard - for hard screwing in metal and sheet metal to prevent breakage.
Torsion - load peaks in the torsion zone of the bit are cushioned for longer life of the bits.
BiTorsion® - the torsion zone of the BiTorsion® bit has a hardness reduced by 20 % compared with the shank. It serves to cushion torque peaks. Longer life of the bits.
Diamond-coated - for universal use, long life. Very small diamond particles adhere to the screw and ensure secure seating of the tool in the screw head.

General Note: TORX PLUS® tools are superior to TORX® tools in torque transmission, due to the significantly larger contact face in the screw.
Attention: The TORX® system and the TORX PLUS® system are compatible only to a limited extent: The operation (restricted) of a TORX PLUS® tool with the conventional TORX® tool is possible. The use of TORX PLUS® with the conventional TORX® profile is however not possible.
Size: T 25
Length: 25 mm
PU piece: 10"

£0.73


Bits part no. 64460030

"Bits for Recess TORX® Screws with ABC-TORX® profile 1/4"" DIN 3126 C 6.3
Description of Design:

Extra-hard - for gentle screwing in wood to prevent breakage.

Tough-hard - for hard screwing in metal and sheet metal to prevent breakage.

Torsion - load peaks in the torsion zone of the bit are cushioned for longer life of the bits.

BiTorsion® - the torsion zone of the BiTorsion® bit has a higher hardness of 20 % compared with the shank. It serves to cushion torque peaks.

Diamond-coated - for universal use, long life. Very small diamond particles adhere to the screw and ensure secure seating of the tool in the screw head.
Design: Though-hard tip, with tenon.

Application: Especially for screws with ABC-TORX® profile.

Description of Design:
Extra-hard - for gentle screwing in wood to prevent breakage.
Tough-hard - for hard screwing in metal and sheet metal to prevent breakage.
Torsion - load peaks in the torsion zone of the bit are cushioned for longer life of the bits.
BiTorsion® - the torsion zone of the BiTorsion® bit has a hardness reduced by 20 % compared with the shank. It serves to cushion torque peaks. Longer life of the bits.
Diamond-coated - for universal use, long life. Very small diamond particles adhere to the screw and ensure secure seating of the tool in the screw head.

General Note: TORX PLUS® tools are superior to TORX® tools in torque transmission, due to the significantly larger contact face in the screw.
Attention: The TORX® system and the TORX PLUS® system are compatible only to a limited extent: The operation (restricted) of a TORX PLUS® tool with the conventional TORX® tool is possible. The use of TORX PLUS® with the conventional TORX® profile is however not possible.
Size: T 30
Length: 25 mm
PU piece: 10"

£0.73


Bits part no. 64460035

"Bits for Recess TORX® Screws with ABC-TORX® profile 1/4"" DIN 3126 C 6.3
Description of Design:

Extra-hard - for gentle screwing in wood to prevent breakage.

Tough-hard - for hard screwing in metal and sheet metal to prevent breakage.

Torsion - load peaks in the torsion zone of the bit are cushioned for longer life of the bits.

BiTorsion® - the torsion zone of the BiTorsion® bit has a higher hardness of 20 % compared with the shank. It serves to cushion torque peaks.

Diamond-coated - for universal use, long life. Very small diamond particles adhere to the screw and ensure secure seating of the tool in the screw head.
Design: Though-hard tip, with tenon.

Application: Especially for screws with ABC-TORX® profile.

Description of Design:
Extra-hard - for gentle screwing in wood to prevent breakage.
Tough-hard - for hard screwing in metal and sheet metal to prevent breakage.
Torsion - load peaks in the torsion zone of the bit are cushioned for longer life of the bits.
BiTorsion® - the torsion zone of the BiTorsion® bit has a hardness reduced by 20 % compared with the shank. It serves to cushion torque peaks. Longer life of the bits.
Diamond-coated - for universal use, long life. Very small diamond particles adhere to the screw and ensure secure seating of the tool in the screw head.

General Note: TORX PLUS® tools are superior to TORX® tools in torque transmission, due to the significantly larger contact face in the screw.
Attention: The TORX® system and the TORX PLUS® system are compatible only to a limited extent: The operation (restricted) of a TORX PLUS® tool with the conventional TORX® tool is possible. The use of TORX PLUS® with the conventional TORX® profile is however not possible.
Size: T 40
Length: 25 mm
PU piece: 10"

£0.73


Bits part no. 64470005

"Bits for Cross Recess Screws Phillips 1/4"" DIN 3126 C6.3, tough-hard tip
Description of Design:

Extra-hard - for gentle screwing in wood to prevent breakage.

Tough-hard - for hard screwing in metal and sheet metal to prevent breakage.

Torsion - load peaks in the torsion zone of the bit are cushioned for longer life of the bits.

BiTorsion® - the torsion zone of the BiTorsion® bit has a higher hardness of 20 % compared with the shank. It serves to cushion torque peaks.

Diamond-coated - for universal use, long life. Very small diamond particles adhere to the screw and ensure secure seating of the tool in the screw head.
Design: Torsion-shaped.
Dimensions: PH 1
Length: 50 mm
PU piece: 10"

£1.14


Bits part no. 64470010

"Bits for Cross Recess Screws Phillips 1/4"" DIN 3126 C6.3, tough-hard tip
Description of Design:

Extra-hard - for gentle screwing in wood to prevent breakage.

Tough-hard - for hard screwing in metal and sheet metal to prevent breakage.

Torsion - load peaks in the torsion zone of the bit are cushioned for longer life of the bits.

BiTorsion® - the torsion zone of the BiTorsion® bit has a higher hardness of 20 % compared with the shank. It serves to cushion torque peaks.

Diamond-coated - for universal use, long life. Very small diamond particles adhere to the screw and ensure secure seating of the tool in the screw head.
Design: Torsion-shaped.
Dimensions: PH 2
Length: 50 mm
PU piece: 10"

£1.14


Bits part no. 64470015

"Bits for Cross Recess Screws Phillips 1/4"" DIN 3126 C6.3, tough-hard tip
Description of Design:

Extra-hard - for gentle screwing in wood to prevent breakage.

Tough-hard - for hard screwing in metal and sheet metal to prevent breakage.

Torsion - load peaks in the torsion zone of the bit are cushioned for longer life of the bits.

BiTorsion® - the torsion zone of the BiTorsion® bit has a higher hardness of 20 % compared with the shank. It serves to cushion torque peaks.

Diamond-coated - for universal use, long life. Very small diamond particles adhere to the screw and ensure secure seating of the tool in the screw head.
Design: Torsion-shaped.
Dimensions: PH 3
Length: 50 mm
PU piece: 10"

£1.14


Bits part no. 64480005

"Bits for Cross Head Screws Pozidriv 1/4"" DIN 3126 E6.3, toughened drive.
Description of Design:

Extra-hard - for gentle screwing in wood to prevent breakage.

Tough-hard - for hard screwing in metal and sheet metal to prevent breakage.

Torsion - load peaks in the torsion zone of the bit are cushioned for longer life of the bits.

BiTorsion® - the torsion zone of the BiTorsion® bit has a higher hardness of 20 % compared with the shank. It serves to cushion torque peaks.

Diamond-coated - for universal use, long life. Very small diamond particles adhere to the screw and ensure secure seating of the tool in the screw head.
Design: Torsion-shaped.
Dimensions: PZ 1
Length: 50 mm
PU piece: 10"

£1.14


Bits part no. 64480010

"Bits for Cross Head Screws Pozidriv 1/4"" DIN 3126 E6.3, toughened drive.
Description of Design:

Extra-hard - for gentle screwing in wood to prevent breakage.

Tough-hard - for hard screwing in metal and sheet metal to prevent breakage.

Torsion - load peaks in the torsion zone of the bit are cushioned for longer life of the bits.

BiTorsion® - the torsion zone of the BiTorsion® bit has a higher hardness of 20 % compared with the shank. It serves to cushion torque peaks.

Diamond-coated - for universal use, long life. Very small diamond particles adhere to the screw and ensure secure seating of the tool in the screw head.
Design: Torsion-shaped.
Dimensions: PZ 2
Length: 50 mm
PU piece: 10"

£1.14


Bits part no. 64480015

"Bits for Cross Head Screws Pozidriv 1/4"" DIN 3126 E6.3, toughened drive.
Description of Design:

Extra-hard - for gentle screwing in wood to prevent breakage.

Tough-hard - for hard screwing in metal and sheet metal to prevent breakage.

Torsion - load peaks in the torsion zone of the bit are cushioned for longer life of the bits.

BiTorsion® - the torsion zone of the BiTorsion® bit has a higher hardness of 20 % compared with the shank. It serves to cushion torque peaks.

Diamond-coated - for universal use, long life. Very small diamond particles adhere to the screw and ensure secure seating of the tool in the screw head.
Design: Torsion-shaped.
Dimensions: PZ 3
Length: 50 mm
PU piece: 10"

£1.14


Bits part no. 64490003

"Bits for Recess TORX® Screws 1/4"" DIN 3126 C 6.3, with Holding Function
Description of Design:

Extra-hard - for gentle screwing in wood to prevent breakage.

Tough-hard - for hard screwing in metal and sheet metal to prevent breakage.

Torsion - load peaks in the torsion zone of the bit are cushioned for longer life of the bits.

BiTorsion® - the torsion zone of the BiTorsion® bit has a higher hardness of 20 % compared with the shank. It serves to cushion torque peaks.

Diamond-coated - for universal use, long life. Very small diamond particles adhere to the screw and ensure secure seating of the tool in the screw head.
Design: Torsion-shaped and holding function. The special geometry of the tip ensures reliable holding of the screw.

Application: Bits with holding function are the ideal tool when positioning TORX® screws in confined spaces, e.g. assembly of indexable inserts.

Description of Design:
Extra-hard - for gentle screwing in wood to prevent breakage.
Tough-hard - for hard screwing in metal and sheet metal to prevent breakage.
Torsion - load peaks in the torsion zone of the bit are cushioned for longer life of the bits.
BiTorsion® - the torsion zone of the BiTorsion® bit has a hardness reduced by 20 % compared with the shank. It serves to cushion torque peaks. Longer life of the bits.
Diamond-coated - for universal use, long life. Very small diamond particles adhere to the screw and ensure secure seating of the tool in the screw head.

General Note: TORX PLUS® tools are superior to TORX® tools in torque transmission, due to the significantly larger contact face in the screw.
Attention: The TORX® system and the TORX PLUS® system are compatible only to a limited extent: The operation (restricted) of a TORX PLUS® tool with the conventional TORX® tool is possible. The use of TORX PLUS® with the conventional TORX® profile is however not possible.
Size: T 8
Length: 25 mm
PU piece: 10"

£0.56


Bits part no. 64490004

"Bits for Recess TORX® Screws 1/4"" DIN 3126 C 6.3, with Holding Function
Description of Design:

Extra-hard - for gentle screwing in wood to prevent breakage.

Tough-hard - for hard screwing in metal and sheet metal to prevent breakage.

Torsion - load peaks in the torsion zone of the bit are cushioned for longer life of the bits.

BiTorsion® - the torsion zone of the BiTorsion® bit has a higher hardness of 20 % compared with the shank. It serves to cushion torque peaks.

Diamond-coated - for universal use, long life. Very small diamond particles adhere to the screw and ensure secure seating of the tool in the screw head.
Design: Torsion-shaped and holding function. The special geometry of the tip ensures reliable holding of the screw.

Application: Bits with holding function are the ideal tool when positioning TORX® screws in confined spaces, e.g. assembly of indexable inserts.

Description of Design:
Extra-hard - for gentle screwing in wood to prevent breakage.
Tough-hard - for hard screwing in metal and sheet metal to prevent breakage.
Torsion - load peaks in the torsion zone of the bit are cushioned for longer life of the bits.
BiTorsion® - the torsion zone of the BiTorsion® bit has a hardness reduced by 20 % compared with the shank. It serves to cushion torque peaks. Longer life of the bits.
Diamond-coated - for universal use, long life. Very small diamond particles adhere to the screw and ensure secure seating of the tool in the screw head.

General Note: TORX PLUS® tools are superior to TORX® tools in torque transmission, due to the significantly larger contact face in the screw.
Attention: The TORX® system and the TORX PLUS® system are compatible only to a limited extent: The operation (restricted) of a TORX PLUS® tool with the conventional TORX® tool is possible. The use of TORX PLUS® with the conventional TORX® profile is however not possible.
Size: T 9
Length: 25 mm
PU piece: 10"

£0.56


Bits part no. 64490005

"Bits for Recess TORX® Screws 1/4"" DIN 3126 C 6.3, with Holding Function
Description of Design:

Extra-hard - for gentle screwing in wood to prevent breakage.

Tough-hard - for hard screwing in metal and sheet metal to prevent breakage.

Torsion - load peaks in the torsion zone of the bit are cushioned for longer life of the bits.

BiTorsion® - the torsion zone of the BiTorsion® bit has a higher hardness of 20 % compared with the shank. It serves to cushion torque peaks.

Diamond-coated - for universal use, long life. Very small diamond particles adhere to the screw and ensure secure seating of the tool in the screw head.
Design: Torsion-shaped and holding function. The special geometry of the tip ensures reliable holding of the screw.

Application: Bits with holding function are the ideal tool when positioning TORX® screws in confined spaces, e.g. assembly of indexable inserts.

Description of Design:
Extra-hard - for gentle screwing in wood to prevent breakage.
Tough-hard - for hard screwing in metal and sheet metal to prevent breakage.
Torsion - load peaks in the torsion zone of the bit are cushioned for longer life of the bits.
BiTorsion® - the torsion zone of the BiTorsion® bit has a hardness reduced by 20 % compared with the shank. It serves to cushion torque peaks. Longer life of the bits.
Diamond-coated - for universal use, long life. Very small diamond particles adhere to the screw and ensure secure seating of the tool in the screw head.

General Note: TORX PLUS® tools are superior to TORX® tools in torque transmission, due to the significantly larger contact face in the screw.
Attention: The TORX® system and the TORX PLUS® system are compatible only to a limited extent: The operation (restricted) of a TORX PLUS® tool with the conventional TORX® tool is possible. The use of TORX PLUS® with the conventional TORX® profile is however not possible.
Size: T 10
Length: 25 mm
PU piece: 10"

£0.56


Bits part no. 64490010

"Bits for Recess TORX® Screws 1/4"" DIN 3126 C 6.3, with Holding Function
Description of Design:

Extra-hard - for gentle screwing in wood to prevent breakage.

Tough-hard - for hard screwing in metal and sheet metal to prevent breakage.

Torsion - load peaks in the torsion zone of the bit are cushioned for longer life of the bits.

BiTorsion® - the torsion zone of the BiTorsion® bit has a higher hardness of 20 % compared with the shank. It serves to cushion torque peaks.

Diamond-coated - for universal use, long life. Very small diamond particles adhere to the screw and ensure secure seating of the tool in the screw head.
Design: Torsion-shaped and holding function. The special geometry of the tip ensures reliable holding of the screw.

Application: Bits with holding function are the ideal tool when positioning TORX® screws in confined spaces, e.g. assembly of indexable inserts.

Description of Design:
Extra-hard - for gentle screwing in wood to prevent breakage.
Tough-hard - for hard screwing in metal and sheet metal to prevent breakage.
Torsion - load peaks in the torsion zone of the bit are cushioned for longer life of the bits.
BiTorsion® - the torsion zone of the BiTorsion® bit has a hardness reduced by 20 % compared with the shank. It serves to cushion torque peaks. Longer life of the bits.
Diamond-coated - for universal use, long life. Very small diamond particles adhere to the screw and ensure secure seating of the tool in the screw head.

General Note: TORX PLUS® tools are superior to TORX® tools in torque transmission, due to the significantly larger contact face in the screw.
Attention: The TORX® system and the TORX PLUS® system are compatible only to a limited extent: The operation (restricted) of a TORX PLUS® tool with the conventional TORX® tool is possible. The use of TORX PLUS® with the conventional TORX® profile is however not possible.
Size: T 15
Length: 25 mm
PU piece: 10"

£0.56


Bits part no. 64490015

"Bits for Recess TORX® Screws 1/4"" DIN 3126 C 6.3, with Holding Function
Description of Design:

Extra-hard - for gentle screwing in wood to prevent breakage.

Tough-hard - for hard screwing in metal and sheet metal to prevent breakage.

Torsion - load peaks in the torsion zone of the bit are cushioned for longer life of the bits.

BiTorsion® - the torsion zone of the BiTorsion® bit has a higher hardness of 20 % compared with the shank. It serves to cushion torque peaks.

Diamond-coated - for universal use, long life. Very small diamond particles adhere to the screw and ensure secure seating of the tool in the screw head.
Design: Torsion-shaped and holding function. The special geometry of the tip ensures reliable holding of the screw.

Application: Bits with holding function are the ideal tool when positioning TORX® screws in confined spaces, e.g. assembly of indexable inserts.

Description of Design:
Extra-hard - for gentle screwing in wood to prevent breakage.
Tough-hard - for hard screwing in metal and sheet metal to prevent breakage.
Torsion - load peaks in the torsion zone of the bit are cushioned for longer life of the bits.
BiTorsion® - the torsion zone of the BiTorsion® bit has a hardness reduced by 20 % compared with the shank. It serves to cushion torque peaks. Longer life of the bits.
Diamond-coated - for universal use, long life. Very small diamond particles adhere to the screw and ensure secure seating of the tool in the screw head.

General Note: TORX PLUS® tools are superior to TORX® tools in torque transmission, due to the significantly larger contact face in the screw.
Attention: The TORX® system and the TORX PLUS® system are compatible only to a limited extent: The operation (restricted) of a TORX PLUS® tool with the conventional TORX® tool is possible. The use of TORX PLUS® with the conventional TORX® profile is however not possible.
Size: T 20
Length: 25 mm
PU piece: 10"

£0.56


Bits part no. 64490020

"Bits for Recess TORX® Screws 1/4"" DIN 3126 C 6.3, with Holding Function
Description of Design:

Extra-hard - for gentle screwing in wood to prevent breakage.

Tough-hard - for hard screwing in metal and sheet metal to prevent breakage.

Torsion - load peaks in the torsion zone of the bit are cushioned for longer life of the bits.

BiTorsion® - the torsion zone of the BiTorsion® bit has a higher hardness of 20 % compared with the shank. It serves to cushion torque peaks.

Diamond-coated - for universal use, long life. Very small diamond particles adhere to the screw and ensure secure seating of the tool in the screw head.
Design: Torsion-shaped and holding function. The special geometry of the tip ensures reliable holding of the screw.

Application: Bits with holding function are the ideal tool when positioning TORX® screws in confined spaces, e.g. assembly of indexable inserts.

Description of Design:
Extra-hard - for gentle screwing in wood to prevent breakage.
Tough-hard - for hard screwing in metal and sheet metal to prevent breakage.
Torsion - load peaks in the torsion zone of the bit are cushioned for longer life of the bits.
BiTorsion® - the torsion zone of the BiTorsion® bit has a hardness reduced by 20 % compared with the shank. It serves to cushion torque peaks. Longer life of the bits.
Diamond-coated - for universal use, long life. Very small diamond particles adhere to the screw and ensure secure seating of the tool in the screw head.

General Note: TORX PLUS® tools are superior to TORX® tools in torque transmission, due to the significantly larger contact face in the screw.
Attention: The TORX® system and the TORX PLUS® system are compatible only to a limited extent: The operation (restricted) of a TORX PLUS® tool with the conventional TORX® tool is possible. The use of TORX PLUS® with the conventional TORX® profile is however not possible.
Size: T 25
Length: 25 mm
PU piece: 10"

£0.56


Bits part no. 64490025

"Bits for Recess TORX® Screws 1/4"" DIN 3126 C 6.3, with Holding Function
Description of Design:

Extra-hard - for gentle screwing in wood to prevent breakage.

Tough-hard - for hard screwing in metal and sheet metal to prevent breakage.

Torsion - load peaks in the torsion zone of the bit are cushioned for longer life of the bits.

BiTorsion® - the torsion zone of the BiTorsion® bit has a higher hardness of 20 % compared with the shank. It serves to cushion torque peaks.

Diamond-coated - for universal use, long life. Very small diamond particles adhere to the screw and ensure secure seating of the tool in the screw head.
Design: Torsion-shaped and holding function. The special geometry of the tip ensures reliable holding of the screw.

Application: Bits with holding function are the ideal tool when positioning TORX® screws in confined spaces, e.g. assembly of indexable inserts.

Description of Design:
Extra-hard - for gentle screwing in wood to prevent breakage.
Tough-hard - for hard screwing in metal and sheet metal to prevent breakage.
Torsion - load peaks in the torsion zone of the bit are cushioned for longer life of the bits.
BiTorsion® - the torsion zone of the BiTorsion® bit has a hardness reduced by 20 % compared with the shank. It serves to cushion torque peaks. Longer life of the bits.
Diamond-coated - for universal use, long life. Very small diamond particles adhere to the screw and ensure secure seating of the tool in the screw head.

General Note: TORX PLUS® tools are superior to TORX® tools in torque transmission, due to the significantly larger contact face in the screw.
Attention: The TORX® system and the TORX PLUS® system are compatible only to a limited extent: The operation (restricted) of a TORX PLUS® tool with the conventional TORX® tool is possible. The use of TORX PLUS® with the conventional TORX® profile is however not possible.
Size: T 27
Length: 25 mm
PU piece: 10"

£0.56


Bits part no. 64490030

"Bits for Recess TORX® Screws 1/4"" DIN 3126 C 6.3, with Holding Function
Description of Design:

Extra-hard - for gentle screwing in wood to prevent breakage.

Tough-hard - for hard screwing in metal and sheet metal to prevent breakage.

Torsion - load peaks in the torsion zone of the bit are cushioned for longer life of the bits.

BiTorsion® - the torsion zone of the BiTorsion® bit has a higher hardness of 20 % compared with the shank. It serves to cushion torque peaks.

Diamond-coated - for universal use, long life. Very small diamond particles adhere to the screw and ensure secure seating of the tool in the screw head.
Design: Torsion-shaped and holding function. The special geometry of the tip ensures reliable holding of the screw.

Application: Bits with holding function are the ideal tool when positioning TORX® screws in confined spaces, e.g. assembly of indexable inserts.

Description of Design:
Extra-hard - for gentle screwing in wood to prevent breakage.
Tough-hard - for hard screwing in metal and sheet metal to prevent breakage.
Torsion - load peaks in the torsion zone of the bit are cushioned for longer life of the bits.
BiTorsion® - the torsion zone of the BiTorsion® bit has a hardness reduced by 20 % compared with the shank. It serves to cushion torque peaks. Longer life of the bits.
Diamond-coated - for universal use, long life. Very small diamond particles adhere to the screw and ensure secure seating of the tool in the screw head.

General Note: TORX PLUS® tools are superior to TORX® tools in torque transmission, due to the significantly larger contact face in the screw.
Attention: The TORX® system and the TORX PLUS® system are compatible only to a limited extent: The operation (restricted) of a TORX PLUS® tool with the conventional TORX® tool is possible. The use of TORX PLUS® with the conventional TORX® profile is however not possible.
Size: T 30
Length: 25 mm
PU piece: 10"

£0.56


Bits part no. 64490035

"Bits for Recess TORX® Screws 1/4"" DIN 3126 C 6.3, with Holding Function
Description of Design:

Extra-hard - for gentle screwing in wood to prevent breakage.

Tough-hard - for hard screwing in metal and sheet metal to prevent breakage.

Torsion - load peaks in the torsion zone of the bit are cushioned for longer life of the bits.

BiTorsion® - the torsion zone of the BiTorsion® bit has a higher hardness of 20 % compared with the shank. It serves to cushion torque peaks.

Diamond-coated - for universal use, long life. Very small diamond particles adhere to the screw and ensure secure seating of the tool in the screw head.
Design: Torsion-shaped and holding function. The special geometry of the tip ensures reliable holding of the screw.

Application: Bits with holding function are the ideal tool when positioning TORX® screws in confined spaces, e.g. assembly of indexable inserts.

Description of Design:
Extra-hard - for gentle screwing in wood to prevent breakage.
Tough-hard - for hard screwing in metal and sheet metal to prevent breakage.
Torsion - load peaks in the torsion zone of the bit are cushioned for longer life of the bits.
BiTorsion® - the torsion zone of the BiTorsion® bit has a hardness reduced by 20 % compared with the shank. It serves to cushion torque peaks. Longer life of the bits.
Diamond-coated - for universal use, long life. Very small diamond particles adhere to the screw and ensure secure seating of the tool in the screw head.

General Note: TORX PLUS® tools are superior to TORX® tools in torque transmission, due to the significantly larger contact face in the screw.
Attention: The TORX® system and the TORX PLUS® system are compatible only to a limited extent: The operation (restricted) of a TORX PLUS® tool with the conventional TORX® tool is possible. The use of TORX PLUS® with the conventional TORX® profile is however not possible.
Size: T 40
Length: 25 mm
PU piece: 10"

£0.56


Bits part no. 64500005

"Bits for Hexagon Socket Screws 1/4"" DIN 3126 E 6.3
Description of Design:

Extra-hard - for gentle screwing in wood to prevent breakage.

Tough-hard - for hard screwing in metal and sheet metal to prevent breakage.

Torsion - load peaks in the torsion zone of the bit are cushioned for longer life of the bits.

BiTorsion® - the torsion zone of the BiTorsion® bit has a higher hardness of 20 % compared with the shank. It serves to cushion torque peaks.

Diamond-coated - for universal use, long life. Very small diamond particles adhere to the screw and ensure secure seating of the tool in the screw head.
Design: The Hex-Plus geometry permits a higher static torque of max. 35 %, Hex-Plus® tip toughened.
Key width: 2 mm
Length: 50 mm
PU piece: 10"

£2.27


Bits part no. 64500010

"Bits for Hexagon Socket Screws 1/4"" DIN 3126 E 6.3
Description of Design:

Extra-hard - for gentle screwing in wood to prevent breakage.

Tough-hard - for hard screwing in metal and sheet metal to prevent breakage.

Torsion - load peaks in the torsion zone of the bit are cushioned for longer life of the bits.

BiTorsion® - the torsion zone of the BiTorsion® bit has a higher hardness of 20 % compared with the shank. It serves to cushion torque peaks.

Diamond-coated - for universal use, long life. Very small diamond particles adhere to the screw and ensure secure seating of the tool in the screw head.
Design: The Hex-Plus geometry permits a higher static torque of max. 35 %, Hex-Plus® tip toughened.
Key width: 2,5 mm
Length: 50 mm
PU piece: 10"

£2.27


Bits part no. 64500015

"Bits for Hexagon Socket Screws 1/4"" DIN 3126 E 6.3
Description of Design:

Extra-hard - for gentle screwing in wood to prevent breakage.

Tough-hard - for hard screwing in metal and sheet metal to prevent breakage.

Torsion - load peaks in the torsion zone of the bit are cushioned for longer life of the bits.

BiTorsion® - the torsion zone of the BiTorsion® bit has a higher hardness of 20 % compared with the shank. It serves to cushion torque peaks.

Diamond-coated - for universal use, long life. Very small diamond particles adhere to the screw and ensure secure seating of the tool in the screw head.
Design: The Hex-Plus geometry permits a higher static torque of max. 35 %, Hex-Plus® tip toughened.
Key width: 3 mm
Length: 50 mm
PU piece: 10"

£2.27


Bits part no. 64500020

"Bits for Hexagon Socket Screws 1/4"" DIN 3126 E 6.3
Description of Design:

Extra-hard - for gentle screwing in wood to prevent breakage.

Tough-hard - for hard screwing in metal and sheet metal to prevent breakage.

Torsion - load peaks in the torsion zone of the bit are cushioned for longer life of the bits.

BiTorsion® - the torsion zone of the BiTorsion® bit has a higher hardness of 20 % compared with the shank. It serves to cushion torque peaks.

Diamond-coated - for universal use, long life. Very small diamond particles adhere to the screw and ensure secure seating of the tool in the screw head.
Design: The Hex-Plus geometry permits a higher static torque of max. 35 %, Hex-Plus® tip toughened.
Key width: 4 mm
Length: 50 mm
PU piece: 10"

£2.27


Bits part no. 64500025

"Bits for Hexagon Socket Screws 1/4"" DIN 3126 E 6.3
Description of Design:

Extra-hard - for gentle screwing in wood to prevent breakage.

Tough-hard - for hard screwing in metal and sheet metal to prevent breakage.

Torsion - load peaks in the torsion zone of the bit are cushioned for longer life of the bits.

BiTorsion® - the torsion zone of the BiTorsion® bit has a higher hardness of 20 % compared with the shank. It serves to cushion torque peaks.

Diamond-coated - for universal use, long life. Very small diamond particles adhere to the screw and ensure secure seating of the tool in the screw head.
Design: The Hex-Plus geometry permits a higher static torque of max. 35 %, Hex-Plus® tip toughened.
Key width: 5 mm
Length: 50 mm
PU piece: 10"

£2.27


Bits part no. 64500030

"Bits for Hexagon Socket Screws 1/4"" DIN 3126 E 6.3
Description of Design:

Extra-hard - for gentle screwing in wood to prevent breakage.

Tough-hard - for hard screwing in metal and sheet metal to prevent breakage.

Torsion - load peaks in the torsion zone of the bit are cushioned for longer life of the bits.

BiTorsion® - the torsion zone of the BiTorsion® bit has a higher hardness of 20 % compared with the shank. It serves to cushion torque peaks.

Diamond-coated - for universal use, long life. Very small diamond particles adhere to the screw and ensure secure seating of the tool in the screw head.
Design: The Hex-Plus geometry permits a higher static torque of max. 35 %, Hex-Plus® tip toughened.
Key width: 6 mm
Length: 50 mm
PU piece: 10"

£2.27


Bits part no. 64500035

"Bits for Hexagon Socket Screws 1/4"" DIN 3126 E 6.3
Description of Design:

Extra-hard - for gentle screwing in wood to prevent breakage.

Tough-hard - for hard screwing in metal and sheet metal to prevent breakage.

Torsion - load peaks in the torsion zone of the bit are cushioned for longer life of the bits.

BiTorsion® - the torsion zone of the BiTorsion® bit has a higher hardness of 20 % compared with the shank. It serves to cushion torque peaks.

Diamond-coated - for universal use, long life. Very small diamond particles adhere to the screw and ensure secure seating of the tool in the screw head.
Design: The Hex-Plus geometry permits a higher static torque of max. 35 %, Hex-Plus® tip toughened.
Key width: 8 mm
Length: 50 mm
PU piece: 10"

£3.80


Bits part no. 64510003

"Bits for Recess TORX® Screws 1/4"" DIN 3126 C 6.3, with Holding Function
Description of Design:

Extra-hard - for gentle screwing in wood to prevent breakage.

Tough-hard - for hard screwing in metal and sheet metal to prevent breakage.

Torsion - load peaks in the torsion zone of the bit are cushioned for longer life of the bits.

BiTorsion® - the torsion zone of the BiTorsion® bit has a higher hardness of 20 % compared with the shank. It serves to cushion torque peaks.

Diamond-coated - for universal use, long life. Very small diamond particles adhere to the screw and ensure secure seating of the tool in the screw head.
Design: Torsion-shaped and holding function. The special geometry of the tip ensures reliable holding of the screw.

Application: Bits with holding function are the ideal tool when positioning TORX® screws in confined spaces, e.g. assembly of indexable inserts.

Description of Design:
Extra-hard - for gentle screwing in wood to prevent breakage.
Tough-hard - for hard screwing in metal and sheet metal to prevent breakage.
Torsion - load peaks in the torsion zone of the bit are cushioned for longer life of the bits.
BiTorsion® - the torsion zone of the BiTorsion® bit has a hardness reduced by 20 % compared with the shank. It serves to cushion torque peaks. Longer life of the bits.
Diamond-coated - for universal use, long life. Very small diamond particles adhere to the screw and ensure secure seating of the tool in the screw head.

General Note: TORX PLUS® tools are superior to TORX® tools in torque transmission, due to the significantly larger contact face in the screw.
Attention: The TORX® system and the TORX PLUS® system are compatible only to a limited extent: The operation (restricted) of a TORX PLUS® tool with the conventional TORX® tool is possible. The use of TORX PLUS® with the conventional TORX® profile is however not possible.
Size: T 8
Length: 50 mm
PU piece: 10"

£2.17


Bits part no. 64510005

"Bits for Recess TORX® Screws 1/4"" DIN 3126 C 6.3, with Holding Function
Description of Design:

Extra-hard - for gentle screwing in wood to prevent breakage.

Tough-hard - for hard screwing in metal and sheet metal to prevent breakage.

Torsion - load peaks in the torsion zone of the bit are cushioned for longer life of the bits.

BiTorsion® - the torsion zone of the BiTorsion® bit has a higher hardness of 20 % compared with the shank. It serves to cushion torque peaks.

Diamond-coated - for universal use, long life. Very small diamond particles adhere to the screw and ensure secure seating of the tool in the screw head.
Design: Torsion-shaped and holding function. The special geometry of the tip ensures reliable holding of the screw.

Application: Bits with holding function are the ideal tool when positioning TORX® screws in confined spaces, e.g. assembly of indexable inserts.

Description of Design:
Extra-hard - for gentle screwing in wood to prevent breakage.
Tough-hard - for hard screwing in metal and sheet metal to prevent breakage.
Torsion - load peaks in the torsion zone of the bit are cushioned for longer life of the bits.
BiTorsion® - the torsion zone of the BiTorsion® bit has a hardness reduced by 20 % compared with the shank. It serves to cushion torque peaks. Longer life of the bits.
Diamond-coated - for universal use, long life. Very small diamond particles adhere to the screw and ensure secure seating of the tool in the screw head.

General Note: TORX PLUS® tools are superior to TORX® tools in torque transmission, due to the significantly larger contact face in the screw.
Attention: The TORX® system and the TORX PLUS® system are compatible only to a limited extent: The operation (restricted) of a TORX PLUS® tool with the conventional TORX® tool is possible. The use of TORX PLUS® with the conventional TORX® profile is however not possible.
Size: T 10
Length: 50 mm
PU piece: 10"

£2.17


Bits part no. 64510010

"Bits for Recess TORX® Screws 1/4"" DIN 3126 C 6.3, with Holding Function
Description of Design:

Extra-hard - for gentle screwing in wood to prevent breakage.

Tough-hard - for hard screwing in metal and sheet metal to prevent breakage.

Torsion - load peaks in the torsion zone of the bit are cushioned for longer life of the bits.

BiTorsion® - the torsion zone of the BiTorsion® bit has a higher hardness of 20 % compared with the shank. It serves to cushion torque peaks.

Diamond-coated - for universal use, long life. Very small diamond particles adhere to the screw and ensure secure seating of the tool in the screw head.
Design: Torsion-shaped and holding function. The special geometry of the tip ensures reliable holding of the screw.

Application: Bits with holding function are the ideal tool when positioning TORX® screws in confined spaces, e.g. assembly of indexable inserts.

Description of Design:
Extra-hard - for gentle screwing in wood to prevent breakage.
Tough-hard - for hard screwing in metal and sheet metal to prevent breakage.
Torsion - load peaks in the torsion zone of the bit are cushioned for longer life of the bits.
BiTorsion® - the torsion zone of the BiTorsion® bit has a hardness reduced by 20 % compared with the shank. It serves to cushion torque peaks. Longer life of the bits.
Diamond-coated - for universal use, long life. Very small diamond particles adhere to the screw and ensure secure seating of the tool in the screw head.

General Note: TORX PLUS® tools are superior to TORX® tools in torque transmission, due to the significantly larger contact face in the screw.
Attention: The TORX® system and the TORX PLUS® system are compatible only to a limited extent: The operation (restricted) of a TORX PLUS® tool with the conventional TORX® tool is possible. The use of TORX PLUS® with the conventional TORX® profile is however not possible.
Size: T 15
Length: 50 mm
PU piece: 10"

£2.17


Bits part no. 64510015

"Bits for Recess TORX® Screws 1/4"" DIN 3126 C 6.3, with Holding Function
Description of Design:

Extra-hard - for gentle screwing in wood to prevent breakage.

Tough-hard - for hard screwing in metal and sheet metal to prevent breakage.

Torsion - load peaks in the torsion zone of the bit are cushioned for longer life of the bits.

BiTorsion® - the torsion zone of the BiTorsion® bit has a higher hardness of 20 % compared with the shank. It serves to cushion torque peaks.

Diamond-coated - for universal use, long life. Very small diamond particles adhere to the screw and ensure secure seating of the tool in the screw head.
Design: Torsion-shaped and holding function. The special geometry of the tip ensures reliable holding of the screw.

Application: Bits with holding function are the ideal tool when positioning TORX® screws in confined spaces, e.g. assembly of indexable inserts.

Description of Design:
Extra-hard - for gentle screwing in wood to prevent breakage.
Tough-hard - for hard screwing in metal and sheet metal to prevent breakage.
Torsion - load peaks in the torsion zone of the bit are cushioned for longer life of the bits.
BiTorsion® - the torsion zone of the BiTorsion® bit has a hardness reduced by 20 % compared with the shank. It serves to cushion torque peaks. Longer life of the bits.
Diamond-coated - for universal use, long life. Very small diamond particles adhere to the screw and ensure secure seating of the tool in the screw head.

General Note: TORX PLUS® tools are superior to TORX® tools in torque transmission, due to the significantly larger contact face in the screw.
Attention: The TORX® system and the TORX PLUS® system are compatible only to a limited extent: The operation (restricted) of a TORX PLUS® tool with the conventional TORX® tool is possible. The use of TORX PLUS® with the conventional TORX® profile is however not possible.
Size: T 20
Length: 50 mm
PU piece: 10"

£2.17


Bits part no. 64510020

"Bits for Recess TORX® Screws 1/4"" DIN 3126 C 6.3, with Holding Function
Description of Design:

Extra-hard - for gentle screwing in wood to prevent breakage.

Tough-hard - for hard screwing in metal and sheet metal to prevent breakage.

Torsion - load peaks in the torsion zone of the bit are cushioned for longer life of the bits.

BiTorsion® - the torsion zone of the BiTorsion® bit has a higher hardness of 20 % compared with the shank. It serves to cushion torque peaks.

Diamond-coated - for universal use, long life. Very small diamond particles adhere to the screw and ensure secure seating of the tool in the screw head.
Design: Torsion-shaped and holding function. The special geometry of the tip ensures reliable holding of the screw.

Application: Bits with holding function are the ideal tool when positioning TORX® screws in confined spaces, e.g. assembly of indexable inserts.

Description of Design:
Extra-hard - for gentle screwing in wood to prevent breakage.
Tough-hard - for hard screwing in metal and sheet metal to prevent breakage.
Torsion - load peaks in the torsion zone of the bit are cushioned for longer life of the bits.
BiTorsion® - the torsion zone of the BiTorsion® bit has a hardness reduced by 20 % compared with the shank. It serves to cushion torque peaks. Longer life of the bits.
Diamond-coated - for universal use, long life. Very small diamond particles adhere to the screw and ensure secure seating of the tool in the screw head.

General Note: TORX PLUS® tools are superior to TORX® tools in torque transmission, due to the significantly larger contact face in the screw.
Attention: The TORX® system and the TORX PLUS® system are compatible only to a limited extent: The operation (restricted) of a TORX PLUS® tool with the conventional TORX® tool is possible. The use of TORX PLUS® with the conventional TORX® profile is however not possible.
Size: T 25
Length: 50 mm
PU piece: 10"

£2.17


Bits part no. 64510025

"Bits for Recess TORX® Screws 1/4"" DIN 3126 C 6.3, with Holding Function
Description of Design:

Extra-hard - for gentle screwing in wood to prevent breakage.

Tough-hard - for hard screwing in metal and sheet metal to prevent breakage.

Torsion - load peaks in the torsion zone of the bit are cushioned for longer life of the bits.

BiTorsion® - the torsion zone of the BiTorsion® bit has a higher hardness of 20 % compared with the shank. It serves to cushion torque peaks.

Diamond-coated - for universal use, long life. Very small diamond particles adhere to the screw and ensure secure seating of the tool in the screw head.
Design: Torsion-shaped and holding function. The special geometry of the tip ensures reliable holding of the screw.

Application: Bits with holding function are the ideal tool when positioning TORX® screws in confined spaces, e.g. assembly of indexable inserts.

Description of Design:
Extra-hard - for gentle screwing in wood to prevent breakage.
Tough-hard - for hard screwing in metal and sheet metal to prevent breakage.
Torsion - load peaks in the torsion zone of the bit are cushioned for longer life of the bits.
BiTorsion® - the torsion zone of the BiTorsion® bit has a hardness reduced by 20 % compared with the shank. It serves to cushion torque peaks. Longer life of the bits.
Diamond-coated - for universal use, long life. Very small diamond particles adhere to the screw and ensure secure seating of the tool in the screw head.

General Note: TORX PLUS® tools are superior to TORX® tools in torque transmission, due to the significantly larger contact face in the screw.
Attention: The TORX® system and the TORX PLUS® system are compatible only to a limited extent: The operation (restricted) of a TORX PLUS® tool with the conventional TORX® tool is possible. The use of TORX PLUS® with the conventional TORX® profile is however not possible.
Size: T 27
Length: 50 mm
PU piece: 10"

£2.17


Bits part no. 64510030

"Bits for Recess TORX® Screws 1/4"" DIN 3126 C 6.3, with Holding Function
Description of Design:

Extra-hard - for gentle screwing in wood to prevent breakage.

Tough-hard - for hard screwing in metal and sheet metal to prevent breakage.

Torsion - load peaks in the torsion zone of the bit are cushioned for longer life of the bits.

BiTorsion® - the torsion zone of the BiTorsion® bit has a higher hardness of 20 % compared with the shank. It serves to cushion torque peaks.

Diamond-coated - for universal use, long life. Very small diamond particles adhere to the screw and ensure secure seating of the tool in the screw head.
Design: Torsion-shaped and holding function. The special geometry of the tip ensures reliable holding of the screw.

Application: Bits with holding function are the ideal tool when positioning TORX® screws in confined spaces, e.g. assembly of indexable inserts.

Description of Design:
Extra-hard - for gentle screwing in wood to prevent breakage.
Tough-hard - for hard screwing in metal and sheet metal to prevent breakage.
Torsion - load peaks in the torsion zone of the bit are cushioned for longer life of the bits.
BiTorsion® - the torsion zone of the BiTorsion® bit has a hardness reduced by 20 % compared with the shank. It serves to cushion torque peaks. Longer life of the bits.
Diamond-coated - for universal use, long life. Very small diamond particles adhere to the screw and ensure secure seating of the tool in the screw head.

General Note: TORX PLUS® tools are superior to TORX® tools in torque transmission, due to the significantly larger contact face in the screw.
Attention: The TORX® system and the TORX PLUS® system are compatible only to a limited extent: The operation (restricted) of a TORX PLUS® tool with the conventional TORX® tool is possible. The use of TORX PLUS® with the conventional TORX® profile is however not possible.
Size: T 30
Length: 50 mm
PU piece: 10"

£2.17